Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Redlands, CA | Stallion Contractors
While we also offer PGT repair in Loma Linda, PGT construction service in Redlands means something specific here: these homes run from 1920s Spanish Revival bungalows near downtown to 1990s tract builds off San Timoteo Canyon, and the window and door openings don’t behave the same way from one block to the next. We’re an independent contractor serving all of Redlands, 92373, 92374, and 92375, handling PGT impact windows, sliding doors, and exterior construction without the manufacturer’s warranty badge. What makes our PGT work different is that we frame, shim, and flash around the actual conditions of your house, not a stock template. Call (855) 600-3192 for a free estimate on PGT service in Redlands.

Why Redlands Residents Choose Us for PGT Service
Ruben Montoya grew up in Colton, not far from Pepper Avenue, where half the houses on his block were built by tradesmen who knew the Inland Empire soil and sun better than anyone. He picked up his foundation in construction at San Bernardino Valley College, where the hands-on programs put him on job sites before he ever had a business card. That background shapes how we approach PGT sales & service here: we know what Redlands heat does to a vinyl sash after eight summers, and we know what an out-of-square 1923 rough opening does to a stock impact window. Our crews have installed, repaired, and re-glazed PGT windows and doors across Redlands’ mix of historic bungalows and east-side tract homes, so we know the WinGuard and Estate lines from the sash up. We’re an independent contractor, not authorized, sponsored, or warranty-endorsed by PGT, and we say so plainly before any work begins.
Styles & brands we work with







Common PGT Construction Problems We Solve in Redlands
- Vinyl WinGuard sashes sagging and losing weather seal. Redlands summers run hot and dry, and a south-facing or west-facing window takes direct UV for months at a stretch. Over time, the vinyl frame relaxes just enough that the sash drops slightly, and the weatherstrip stops doing its job. We see this most often on east-side ranch homes where original windows date from the 1980s and 1990s and have been cycling through 100-degree days for decades.
- Aluminum WinGuard frames with pitted or chalky finish. Intense sun and occasional Santa Ana winds will gnaw at an aluminum frame’s finish faster than most homeowners expect. The chalky residue on your fingers when you touch the frame is oxidation, and the glazing gaskets underneath are usually brittle and cracked by then. This shows up on homes all across Redlands, but especially on exposed elevations along higher lots near Sunset Drive.
- Sliding patio door rollers and tracks binding with grit. Dust and fine sand blow in from the washes, and east-side tract homes with large rear sliders collect it along the track. The rollers grind, the door binds, and eventually you’re leaning your body weight into it just to get outside. We replace rollers, clean and re-align tracks, and re-seal the gaskets so the door glides like it should.
- Impact glazing laminate edge seal failure or fogging between panes. Santa Ana wind-driven debris can strike a window hard enough to damage the laminate edge seal without breaking the glass. What you see is fog or haze between the panes that won’t go away, which means the insulating gas has escaped and the seal has failed. On PGT impact units, this is a re-glaze or replacement call, not a wipe-it-down fix.
- Porch and entry door frames twisted out of square on older homes. Downtown Redlands bungalows settled decades ago, and the entry door openings are rarely square anymore. When a PGT Estate Collection door goes in, the threshold and jamb have to be custom-shimmed to account for that old foundation movement, or the door won’t seal and lock properly. This is a classic Redlands scope surprise on homes built before 1940.
PGT Service in Redlands: What Local Conditions Mean for Your Equipment
Redlands is an Inland Empire citrus-belt city where construction work is dominated by a huge inventory of early-1900s to 1950s Craftsman, Spanish Colonial Revival, and ranch homes around the historic downtown and along the orange-grove streets. That’s not just architectural charm; it’s a structural fact that affects every PGT window or door we install. The preserved early-1900s Craftsman and Spanish Revival homes near downtown were often built with redwood or old-growth fir window openings and non-standard rough openings. A stock PGT WinGuard unit will not simply drop into a 1924 opening on Cajon Street or Eureka Street. The rough opening will be a quarter-inch out of square, the jack studs will be undersized by modern code, and the old stucco reveal will not match a factory frame. That means custom frame sizing, shimming, and flashing, real carpentry work that a standard tract-home window swap never requires. When a Redlands homeowner wants impact-rated protection on a historic home, the PGT product is only half the job. The other half is making the opening right before the window ever goes in.
PGT Models & Products We Service in Redlands
We work on the PGT WinGuard Aluminum impact windows and sliding glass doors, the WinGuard Vinyl impact single-hung and casement windows, the Estate Collection aluminum clad and wood interior windows and doors, and the PGT aluminum series patio sliding doors. When a unit is mechanically sound, we use OEM PGT replacement sashes, rollers, gaskets, and hardware. When OEM lead times stall a project, we source quality aftermarket glazing and seals so work doesn’t sit for six weeks. If frame damage or repeated seal failures make repair a recurring cost, we recommend full replacement and lay out both paths honestly. For Redlands homeowners, that often means quoting an impact window installation alongside a window replacement and letting the budget decide the direction.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Redlands
Here’s what PGT-related work currently costs around Redlands. These are the ranges we quote on site, and they reflect the condition of local housing stock, not a national average.
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement & Installation | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
What drives the cost in Redlands — like our work with PGT in Highland — is the condition of the existing opening. A 1998 tract home with square framing and clean flashing is a straightforward install. A 1927 Craftsman with settled framing and undersized jack studs takes more labor, more shimming, and often a custom frame size. Our free estimate includes a full site inspection, written line-item quote, and no obligation. Call (855) 600-3192 to schedule one.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and also provide PGT service in Mentone, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – PGT Construction in Redlands
Yes, but rarely with a stock frame. The rough openings on early-1900s Craftsman homes around downtown Redlands are typically out of square, with redwood or old-growth fir framing that doesn’t match modern PGT unit dimensions. Custom shimming, flashing, and frame sizing are usually required, and we plan for that before pulling a single window. Call (855) 600-3192 and we’ll assess your openings directly.
It depends on the sash and frame. If the vinyl sash has sagged and lost its weather seal but the frame is sound, we can replace the sash, gaskets, and hardware with OEM parts and restore the seal. If the frame is warped or the glazing laminate edge seal has failed, replacement becomes the more honest recommendation, especially after repeated Redlands heat cycles. Call (855) 600-3192 for an exact diagnosis and quote.
The intense, uninterrupted UV exposure through Redlands summers accelerates oxidation on aluminum frames and dries out glazing gaskets within five to eight years. Frames develop a chalky, pitted finish, and gaskets harden until they crack. Regular inspection and re-sealing can extend the life of the units, but full re-glazing is eventually necessary. Call (855) 600-3192 to have a crew check your frames before the next heat wave.
Yes. East Redlands tract homes, especially those built from the 1980s through the 2000s, accumulate fine dust and grit along slider tracks. Rollers bind, doors drag, and the track itself can score. We replace rollers, clean and re-align the track, and re-seal the gaskets. Call (855) 600-3192 and we’ll inspect the door without obligation.
No. Stallion Contractors is an independent contractor. We are not authorized, sponsored, or warranty-endorsed by PGT, and we tell every Redlands homeowner that before work begins. What we offer is hands-on experience with PGT WinGuard and Estate lines, honest parts sourcing, and framing work that fits the actual conditions of your house. Call (855) 600-3192 for a free estimate.
Service Areas Near Redlands
We serve all of Redlands service area, including the ZIP codes 92373, 92374, and 92375. We also take PGT work in PGT service in Rancho Cucamonga, PGT service in Grand Terrace, Colton, Bloomington, Loma Linda, and Mentone. If you’re within a short drive of Redlands, we’ll come out and take a look.
Book Your PGT Service in Redlands Today
Whether it’s a sagging WinGuard sash on an east-side ranch, our Colton PGT service, or full impact window replacement on a downtown Craftsman, we’ll give you a straight answer and a line-item quote. Call (855) 600-3192 to schedule your free estimate and see where your PGT windows and doors stand.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Redlands and the Inland Empire since 1998. Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing.