Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Bloomington, CA | Stallion Contractors
We provide independent CGI service across Bloomington – frameless glass shower enclosures, standing seam metal roofing, quartz and granite countertops, and shower door kits. What makes our CGI work different here comes down to one thing: Bloomington is unincorporated San Bernardino County, so every permit runs through County Land Use Services, not a city building department. That changes plan-check timing, inspection sequencing, and what a contractor has to document before the first panel comes off the truck. Call (855) 600-3192 if you need CGI work planned or repaired on a Bloomington property.
Stallion Contractors is a licensed general contractor with full-scope remodeling capability across the Inland Empire. We’re not manufacturer-affiliated or authorized by CGI – we’re an independent service provider who works on CGI products every season. That independence means we quote repair versus replacement honestly, we source OEM parts where structural ratings depend on them, and we specify what actually holds up under Bloomington’s heat and county plan-check rules. For more on our broader CGI work, see CGI sales & service.
Why Bloomington Residents Choose Us for CGI Service
Ruben Montoya, our owner, grew up in Colton off Pepper Avenue, where half the block was built by tradesmen who understood Inland Empire soil and sun. He learned construction hands-on at San Bernardino Valley College before he ever carried a business card, and he’s spent over two decades on job sites across Colton and Bloomington. His father was a finish carpenter – which is partly why we pay closer attention to the final ten percent of a CGI job than most crews pay to the first ninety.
When a Bloomington homeowner calls us about a CGI frameless shower enclosure or a standing seam metal roof, we’re already thinking about their cinder-block foundation, their county permit file, and the hundred-degree afternoons that stress every seal and fastener. That’s the local edge. Not a sales pitch – just familiarity with what fails here and what passes inspection.
We work across the entire Bloomington service area in the 92316 ZIP, from ranch-style homes off Valley Blvd to older tract houses with unpermitted prior additions. One contractor for every trade means you’re not coordinating a glass installer, a roofer, and a countertop fabricator separately.
Styles & brands we work with
Common CGI Construction Problems We Solve in Bloomington
- Out-of-square shower enclosure openings. Bloomington’s 1950s – 70s ranch homes sit on cinder-block foundations that settle and shift. By the time we template a CGI frameless glass enclosure, the opening is often out of square by a half-inch or more. Hinges bind, seals fail, and the glass gets stressed. We re-square the opening and re-flash the curb before any panel is cut.
- Standing seam panel walk and seam fatigue. Summer highs past 100°F and Santa Ana wind uplift punish metal roofing. If CGI panel clips were set too tight or fasteners under-torqued, the panels expand, walk, and fatigue the seams. We inspect clip spacing, torque, and Kynar 500 finish integrity before any repair is quoted.
- Countertop cracks at sink cutouts. We see this in Bloomington kitchens where 1970s cabinet boxes were never shimmed or re-secured. Install a CGI quartz slab over an un-flattened base, and the sink cutout becomes a stress point that cracks within the first year. We flatten and reinforce the cabinet run before mounting stone.
- Shower door roller and seal failure from dust load. Bloomington’s dry smog and Santa Ana dust settle into shower door tracks. CGI rollers and seals degrade fast if they aren’t specified with the right coating and maintained. We replace with OEM hardware where warranty depends on it, and quality aftermarket seals where it doesn’t.
- County as-built corrections on unpermitted additions. A bathroom remodel with a new CGI shower enclosure often starts with discovery: the prior owner added square footage without permits. San Bernardino County Land Use Services wants that as-built correction documented before new exterior or structural work gets signed off. We handle that process – most crews won’t touch it. Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing.
CGI Service in Bloomington: What Local Conditions Mean for Your Equipment
Because Bloomington is unincorporated, every CGI standing seam metal roof or shower enclosure permit runs through San Bernardino County Land Use Services – not a city building department. County plan checkers require as-built corrections for unpermitted prior additions before they’ll sign off on new exterior or structural work. That’s a Bloomington-specific reality. A homeowner in Colton, Redlands, or CGI service in Rialto files through their city; a Bloomington homeowner waits on county plan check, and if the prior garage conversion was never permitted, the whole remodel stalls until that’s corrected. We’ve been through this on dozens of Bloomington remodels, so we sequence CGI product specification around county review from day one. Glass, metal panels, quartz – every material gets specified and documented to pass county inspection the first time. On a ranch-style home off Valley Blvd, our crew was called to replace a failing CGI frameless glass shower enclosure in a hall bath. The original opening was out of square by 3/4 inch from the cinder-block foundation. We re-squared and re-flashed the curb, reset the CGI 1/2-inch tempered panels on new OEM hinges, and passed the county inspection without a single callback.
CGI Models & Products We Service in Bloomington
Our crews work on CGI Frameless Glass Shower Enclosures in 3/8-inch and 1/2-inch tempered configurations, both inline and neo-angle layouts. We handle CGI Standing Seam Metal Roofing with Kynar 500 finished, 24-gauge panels. We install and repair CGI Quartz and Granite Countertops across the engineered and natural stone lines, plus CGI Shower Doors and Tub-to-Shower Conversion Kits. For hardware and clips where the structural rating or warranty depends on OEM parts, we source directly through CGI channels. For rollers, seals, and fasteners, we use OEM or quality aftermarket depending on remaining panel and enclosure life. We stock common CGI seal profiles and roller sets locally to keep Bloomington turnaround short.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Bloomington
Here’s what CGI work in Bloomington typically runs. These are market-calibrated ranges for the 92316 ZIP – your exact quote depends on existing conditions, county permit status, and material choices:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Countertop Installation | $2,000 – $6,500 |
| Metal Roof Installation | $15,000 – $40,000 |
What drives a Bloomington CGI quote higher than a neighboring city? Two things. County plan-check fees and time, especially when we have to correct an unpermitted prior addition. And foundation work – re-squaring a shower opening or flattening cabinet boxes before stone goes in. A free estimate gets you a written line-item breakdown, not a ballpark. Call (855) 600-3192 to schedule one.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Bloomington
Yes, and it happens more often in Bloomington than anywhere else we work. We document the existing conditions, file the as-built correction with San Bernardino County Land Use Services, and only then template and install the enclosure. That sequence is the only way to get final county sign-off without tearing out the new work later. Call (855) 600-3192 and we’ll walk you through what your specific property needs.
Summer highs over 100°F and Santa Ana uplift stress panel expansion, clip spacing, and fastener torque. If the original install set clips too tight or skipped torque checks, the panels walk and seams fatigue. We inspect all of that before quoting any repair, and we specify panel and clip combinations rated for the western San Bernardino Valley’s temperature swings. Call (855) 600-3192 for a roof inspection.
Most Bloomington kitchens with CGI quartz cracks at the sink have original 1970s cabinet boxes that were never shimmed, leveled, or re-secured. The stone gets mounted over an un-flattened base, and the sink cutout becomes a flex point. We flatten and reinforce the cabinet run before we mount any slab. Call (855) 600-3192 to have your existing tops checked.
Yes, the dry smog and Santa Ana dust load settle into tracks and grind down seals and rollers faster than they would in a coastal climate. We specify coated hardware where it’s available, and we stock common CGI seal profiles locally so replacement doesn’t take weeks. Call (855) 600-3192 if your shower door is dragging or leaking at the edges.
Yes, we file and manage the full county plan check. We’ve moved dozens of Bloomington CGI projects through County Land Use Services, including as-built corrections for unpermitted prior work, and we handle CGI service in Pedley with the same county expertise. That’s the part that stalls most out-of-town crews – it’s our normal Monday. Call (855) 600-3192 for an exact quote; estimates are free.
Service Areas Near Bloomington
We serve Bloomington and the surrounding Inland Empire communities, including Colton, Loma Linda, and Redlands. For homeowners further east, see CGI service in Mentone and CGI service in San Antonio Heights. If you’re in the 92316 ZIP or nearby, we’ll come to you.
Book Your CGI Service in Bloomington Today
One contractor for your CGI shower enclosure, metal roof, or countertop project – from the first county form to the final inspection. Call (855) 600-3192 to schedule your free estimate, and we’ll put a written line-item quote in your hands before you commit to anything.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Bloomington and the Inland Empire for over two decades.