Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Sun City, CA | Stallion Contractors
We provide independent Mr-Glass shower enclosure service across Sun City, CA (92585, 92586, 92587) – installations, repairs, hardware replacement, and full bathroom remodels – plus Romoland Mr-Glass service nearby. What makes our Mr-Glass work different here is that we know these 1960s Del Webb bathrooms firsthand: the narrow stalls, the out-of-square walls, the slab floors that have shifted over six decades. Call (855) 600-3192 for a free estimate, and we’ll tell you honestly whether your enclosure needs new hardware or a full replacement.
Why Sun City Residents Choose Us for Mr-Glass Service
Ruben Montoya grew up in nearby Colton and learned early that good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing. That’s how we approach every Mr-Glass job in Sun City. We’ve spent years installing and repairing Mr-Glass frameless doors, semi-frameless bypass units, and neo-angle enclosures in these original Del Webb tract homes, so we understand how the glass sits against 60-year-old stucco walls that haven’t been level since Nixon was in office.
Because we’re independent, we don’t answer to a manufacturer. We fit the glass to your actual opening, not to a factory spec sheet. If a properly re-hung door and new seals will do the job, that’s what we’ll recommend – not a replacement you don’t need. And since we’re a full-scope general contractor, we can handle the framing, drywall, tile, and plumbing that often surround a shower enclosure job, so you’re not coordinating three different trades on a tight Sun City timeline. One contractor. Every trade. That matters when you’re living in the house during the work.
See our broader Mr-Glass sales & service page for the full scope of what we handle across the Inland Empire.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Sun City
- Roller and track wear on sliding bypass doors. Sun City’s dry inland air means dust and fine grit settle on shower tracks fast. The rollers flat-spot within a few years, the door binds, and eventually it jumps the track entirely. We replace the rollers and re-align the track, which usually beats replacing the whole unit.
- Silicone and sweep seal failure at the curb and wall jambs. The 1961 – 1965 Del Webb homes sit on slab-on-grade foundations that shift with the clay-heavy soil. Stucco cracks at the shower corners, the old silicone separates, and water migrates into the wall framing. We see this constantly, and it’s usually the first sign a homeowner notices.
- Hinge and pivot sag on frameless doors. Original Sun City bathrooms are small and rarely level. A frameless Mr-Glass door that swung true when it was installed can start dragging on the curb or swinging open on its own as the hinges settle into out-of-square walls. We re-shim the hinges and adjust the pivot points – the glass panel itself is often perfectly fine.
- Mineral etching and hard-water clouding. Riverside County water carries heavy minerals, and with summer humidity in single digits, static attracts dust to the glass surface. Panels cloud faster than owners expect. We clean, polish, and restore what we can, and tell you straight when the etching has gone too deep for anything but replacement.
- Curb cracks and water staining under older tub-shower combos. The original curbs in these 60-year-old bathrooms were built to older standards and often weren’t waterproofed the way we’d do it today. We patch and re-seal them properly before resetting the glass, so the enclosure isn’t hiding a slow leak.
Mr-Glass Service in Sun City: What Local Conditions Mean for Your Equipment
Here’s the thing about Sun City that no generic shower-glass company will tell you: the original Del Webb bathrooms were built with narrow stalls that don’t meet current ADA clearances. The shower openings are typically 24 to 30 inches wide, the doorways are a tight 28 inches, and the bathrooms themselves are small enough that a walker or wheelchair has nowhere to turn. So almost every Mr-Glass enclosure job in Sun City becomes an accessibility fit, whether the homeowner planned it that way or not. We routinely have to widen the rough opening, set a curbless pan, and add grab-bar blocking behind the tile before the glass can even be templated. That’s not true in Menifee, Mr-Glass in Good Hope, or Murrieta, where newer homes have wider doors and larger shower footprints. It’s a Sun City reality, and we plan for it from the first measurement. On a 1963 Del Webb ranch off Sun City Boulevard, our crew walked into a bathroom where the sliding Mr-Glass bypass door had jumped its track and the original curb was holding a decade of failed silicone. We pulled the panels, replaced the flat-spotted rollers and both jamb sweeps, added grab-bar blocking behind the tile, and reset the enclosure level over a patched curb. The door now glides and seals with no leak into the hallway wall. That’s what planning around this housing stock looks like.
Mr-Glass Models & Products We Service in Sun City
We work on the full current and legacy Mr-Glass line: frameless hinged shower doors, semi-frameless sliding bypass doors, neo-angle corner enclosures, and framed tub-shower combinations. When the original profile is still current, we source OEM Mr-Glass rollers, hinges, sweeps, and jamb seals. When it’s been discontinued – which happens often on homes this age – we match quality aftermarket hardware by glass thickness and hole spacing. The glass itself is usually worth keeping. Our honest stance: replace worn hardware and seals first, and only recommend a full enclosure replacement when the tempered panel is chipped, drilled wrong, or the opening has shifted past what new hardware can correct. For Sun City turnaround, we keep common bypass rollers, hinge bushings, and jamb seals stocked so small repairs don’t turn into week-long waits.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Sun City
Here’s what you can expect on the billing side, based on current Inland Empire market rates:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the cost in Sun City specifically is the structural work around the glass. Widening an opening, re-framing a wall, adding blocking for grab bars, and waterproofing a curbless pan are construction tasks, not shower-door tasks. A free estimate from us includes measurements of your actual opening, a check of the wall plumb and level, and a line-item quote so you see exactly what you’re paying for. Call (855) 600-3192 to schedule yours.
Serving Sun City, CA — Our Local Coverage Area
We’re based in the Sun City area and know this community well, and we also provide Mr-Glass repair in Perris. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Sun City
Yes, we do it regularly. The key is measuring the actual wall deviation and then shimming the hinge side and building out the strike side so the door closes clean. Frameless glass doesn’t flex, so the opening has to be trued up before the panels go in. Call (855) 600-3192 and we’ll tell you how much correction your specific walls need.
Almost never. The squeal is usually flat-spotted rollers grinding on a dry, dusty track, and the sticking is a misaligned bypass assembly. We replace the rollers, clean and re-align the track, and the door runs quiet again. A full replacement only makes sense if the glass is damaged or the opening has moved so far that new hardware can’t compensate. Call (855) 600-3192 for a straight answer.
Often yes, because the original Del Webb doorways are 28 to 30 inches wide, which is too narrow for a wheelchair or standard walker. If the goal is a shower that works for years of aging in place, the bathroom entry usually needs to come out to at least 32 inches, and we handle that as part of the same project. A free estimate covers all of it – call (855) 600-3192.
We phase the work and seal off the work area with plastic sheeting and dust barriers, and we schedule the loudest cutting for the earliest part of the day. For Sun City residents living in place during a remodel, we also keep a clear path to one functioning bathroom at all times. We plan the schedule around how you live, not around what’s easiest for the crew.
Sometimes. If the existing tempered panels are in good shape and the new shower footprint works with their dimensions, we can re-use them with new hardware, new seals, and a new pan. If the panels are etched, chipped, or drilled for a different configuration, replacement is the safer call. Call (855) 600-3192 and we’ll tell you which side of that line your glass falls on.
Service Areas Near Sun City
We run Mr-Glass service across Sun City service area and the surrounding Inland Empire communities. If you’re just over the border, we also cover Mr-Glass service in Villa Park and Mr-Glass service in Fullerton, plus Colton, Bloomington, Loma Linda, and Redlands.
Book Your Mr-Glass Service in Sun City Today
If your Mr-Glass shower is leaking, sticking, or clouded, don’t wait for the water to find the framing underneath. Call (855) 600-3192 for a free estimate. We’ll measure your actual opening, give you a straight repair-versus-replace answer, and schedule the work around your life in Sun City.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Sun City and the Inland Empire.