Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in San Bernardino, CA | Stallion Contractors
We install, repair, and replace Therma-Tru sales & service door systems across San Bernardino, from valley tract homes to foothill properties. We’re an independent contractor, not an authorized Therma-Tru dealer, which means we recommend the right fix without brand pressure. What sets our Therma-Tru work apart here is understanding exactly how San Bernardino’s heat, UV, and Santa Ana winds beat on these doors year after year. Call (855) 600-3192 for a free estimate.
Why San Bernardino Residents Choose Us for Therma-Tru Service
Ruben Montoya grew up in Colton and learned construction at San Bernardino Valley College, so he’s been working with Inland Empire homes and their doors for over two decades. His father was a finish carpenter, which is partly why we still pay more attention to the final ten percent of a job than most contractors pay to the first ninety. That matters when you’re setting a Therma-Tru slab square in a mid-century frame that’s settled with the valley soil.
We carry genuine Therma-Tru OEM parts when available: door slabs, glass inserts, hinges, weatherstripping. We’ll also use quality aftermarket hardware when a door is out of warranty or the homeowner wants a budget-sensitive repair. The point is fit and finish, not upselling you on a replacement you don’t need.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in San Bernardino
- Sun-baked fiberglass skins. South- and west-facing entries in San Bernardino take relentless afternoon heat. Darker-painted Fiber-Classic doors fade and chalk after a few summers over 100°F. We sand, re-finish with UV-resistant coatings, or replace the slab if the degradation runs deep.
- Thermal cycling warps and delamination. Valley days hit triple digits, then mountain-edge nights drop fast. That daily expansion and contraction stresses door slabs and weatherstripping. We see warped slabs, cracked seals, and doors that bind in the frame.
- Santa Ana dust in hinges and locksets. Wind-driven grit works into every moving part. Door bottoms, hinges, and deadbolt mechanisms wear faster in San Bernardino than coastal cities. We clean, adjust, and replace worn components before they fail.
- WUI ember intrusion at the frame. For foothill and mountain-edge homes, gaps around Therma-Tru door frames and sidelites are a fire-hardening weak point. We inspect seals and recommend ember-resistant upgrades where the WUI code applies.
- Air leaks and drafty entries. Old weatherstripping hardens in the dry heat and stops compressing. You feel the draft, and the AC works harder. We replace seals with OEM-spec material and realign the door.
Therma-Tru Service in San Bernardino: What Local Conditions Mean for Your Equipment
San Bernardino’s dual geography creates two different door enemies depending on elevation. On a valley tract home, a Therma-Tru entry door faces 100°F+ summers and intense UV that fade and warp fiberglass slabs. A few miles up into the foothills, that same door has to hold up to fire-hardening expectations under California’s WUI rules. Our install specs change with elevation: weatherstripping compound, seal density, finish type. A door on a 1940s ranch near the 215 has different needs than one in a newer foothill build near Devil’s Canyon, so we also offer Therma-Tru in Highland. Ruben’s crew knows which side of the transition you’re on and specs the job accordingly. We’re an independent contractor and not authorized, sponsored, or endorsed by Therma-Tru, but we’ve installed and serviced their door systems across San Bernardino’s inland valley and foothill neighborhoods for years.
Therma-Tru Models & Products We Service in San Bernardino
We work on the Fiber-Classic entry doors, Smooth-Star fiberglass doors, Classic-Craft door series, and Therma-Tru patio and French door systems. For repairs, we source genuine Therma-Tru OEM replacement parts when available: door slabs, glass inserts, hinges, and weatherstripping. When a part is obsolete or the repair budget calls for it, we turn to quality aftermarket hardware that matches the spec. We keep common seal profiles and hinge sets stocked in San Bernardino so we’re not waiting a week on a truck for a door that’s leaking air today. On a mid-century tract home near the base of the San Bernardino Mountains, we replaced a sun-bleached Fiber-Classic entry door whose skin had chalked and whose weatherstripping had hardened from years of 100°F+ summers. We upgraded to a Smooth-Star slab with fresh OEM seals and a UV-resistant finish, then adjusted the frame and hinges so the door closed cleanly against the Santa Ana dust that had been working into the old gaps. The homeowner noticed an immediate difference in draft and curb appeal.
Therma-Tru Service Pricing in San Bernardino
What you pay depends on whether you’re replacing a door system or repairing the one you have. Window replacement and impact window installation often run alongside Therma-Tru door work on a remodel, so here’s where the numbers land in San Bernardino:
| Service | Market Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
For door work specifically, a weatherstripping replacement or hinge adjustment runs a few hundred dollars. A full slab replacement with new seals and hardware typically runs higher, depending on the model and glass. If your door has multiple failing seals, a warped slab, and UV-degraded finish, we give you an honest repair-vs-replace comparison instead of defaulting to a full replacement. Call (855) 600-3192 for an exact quote, estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhen a Door Needs More Than a Fix
We’re not a door shop. We’re a full-scope general contractor, so when a Therma-Tru door replacement turns into a bigger conversation about windows, siding, or the whole entryway, we can handle it under one contract. From the kitchen to the roofline, we manage the trades and the materials so you don’t coordinate three vendors for what should be one project. That’s the Stallion difference, and it’s why our brand roster includes Cambria, Silestone, GAF, CertainTeed, Owens Corning, James Hardie, and Therma-Tru. Pro-grade materials, professionally installed.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well, including Therma-Tru service in Muscoy. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in San Bernardino
A properly installed Therma-Tru door with a UV-resistant finish can hold up well, but darker-painted Fiber-Classic slabs facing south or west will fade and chalk over years of intense sun. Warping happens when the daily thermal swing stresses the slab, especially on older doors with failing weatherstripping. We spec finishes and seals for San Bernardino’s specific heat profile. Call (855) 600-3192 for a condition check.
Therma-Tru fiberglass doors can meet WUI requirements when properly installed, but the weak point is always the perimeter: gaps around the frame, sidelites, and weatherstripping where embers can work in. We inspect those areas on every foothill job and recommend ember-resistant seal upgrades where the code applies.
In San Bernardino’s dry heat, weatherstripping hardens and loses compression within three to five years. If you feel a draft at the door’s edge or see visible cracking, it’s time. We check seals on every service visit and replace them with OEM-spec material as part of the job.
Thermal cycling is the main culprit. Hot valley days and cold mountain-edge nights make the slab and frame expand and contract daily, which can bind the door or stress the hinges. Dust from Santa Ana winds compounds the problem by working into hinges and locksets. We adjust frames, lubricate or replace worn hardware, and re-hang the slab square.
If the fade is cosmetic and the slab is structurally sound, repair can extend the door’s life for years at a fraction of replacement cost. If you’re seeing warping, multiple failing seals, and UV-degraded finish together, replacement often makes more financial sense. We give you both numbers and let you decide. Call (855) 600-3192 for a free estimate.
Service Areas Near San Bernardino
We serve San Bernardino and the surrounding communities, including Colton, Rialto, Bloomington, Loma Linda, and Redlands. For more on our Therma-Tru work just west of San Bernardino, see Therma-Tru service in Rialto or Therma-Tru service in Fontana. You can also visit our San Bernardino service area page for the full coverage map.
Book Your Therma-Tru Service in San Bernardino Today
If your Therma-Tru door is sticking, drafty, faded, or letting dust in, call (855) 600-3192 for Therma-Tru repair in Loma Linda. We’ll schedule a free estimate, walk you through the repair-versus-replace numbers, and get the door working right. Your project managed start to finish.
Written by Ruben Montoya, Owner at Stallion Contractors, serving San Bernardino since he started building in the Inland Empire. Good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing.