Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Colton
If you’re planning a remodel, addition, or exterior replacement in Colton, you need a contractor who understands what this city’s housing stock and hillside geology actually demand. Stallion Contractors brings full-scope general contracting to Colton homeowners, from kitchen and bath overhauls to roof replacements and ADU construction. We know the stucco tract homes north of the 10, the knolls above La Loma, and the older rail-town bungalows near downtown. Call (855) 600-3192 to schedule a free estimate, and you’ll get a written line-item quote before any work begins.
Why Stallion Contractors Is Colton’s Preferred General Contractor Company
Colton homeowners keep calling us because we manage the whole job, not just one trade. Our General Contractor team handles interior remodels, exterior replacements, and structural work under one contract, so you don’t spend your evenings coordinating a roofer, a window installer, and a finish carpenter. That matters in a city where one project can mean replacing a wind-damaged roof, adding earthquake bracing, and redoing a kitchen in the same year.
Ruben Montoya runs every Colton job with the same expectation: permits pulled, inspections passed, and documentation filed so nothing comes back to bite you at insurance renewal. We’ve worked on 1940s tract homes near Colton High and newer hillside builds in Reche Canyon where grading and drainage make or break the foundation. Our crews know the local inspectors’ expectations and the soil conditions along the La Loma ridge. When a Colton homeowner calls us, they get a contractor who has already done the hard learning on someone else’s slab.
Styles & brands we work with
Remodeling Contractor in Colton
Remodeling Contractor work in Colton typically means gutting a 1950s or 1960s kitchen down to studs, reframing for modern layouts, and often finding surprises behind the drywall. Most Colton remodels we handle are full-scope: cabinet installation, countertop fabrication, backsplash, flooring, and lighting, all coordinated by one team. Kitchen remodels in Colton run $14,000 – $45,000, with small kitchens starting around $9,000. Bathroom remodels land between $9,000 and $28,000. If you’re working with an older electrical panel, which is common in Colton’s postwar stock, we fold the panel upgrade into the same permit package.
Whole-Home Scope Without the Runaround
When a Colton homeowner asks us to remodel a kitchen, we also check what’s happening above the ceiling and under the floor. An exhaust fan that vents into the attic, shifting floor joists, or stucco cracks from clay movement can turn a simple remodel into a structural conversation. We flag those issues before demolition, not after you’ve spent the cabinet budget.
Brand-Partner Materials, Not Showroom Upsells
Through our manufacturer partnerships, you can spec Cambria or Silestone countertops, KraftMaid cabinetry, and Schluter tile-edge systems without paying designer-showroom markup. Our crew installs them to the manufacturer’s specs, which keeps warranties intact.
Licensed General Contractor in Colton
Licensed General Contractor work in Colton often starts with a permit question, not a hammer. Whether it’s a room addition, a hillside ADU, or a full exterior envelope replacement, the city wants to see engineered plans, soil reports where required, and a contractor who knows the local amendments to Title 24. Home additions in Colton run $45,000 – $130,000. ADU construction lands between $90,000 and $220,000, and garage conversions typically range from $30,000 to $80,000. These are real numbers for this market, not placeholders.
Permits, Soils Reports, and the Work Most Contractors Skip
On Colton’s hillside lots, especially in Reche Canyon and along the La Loma knolls, a room addition almost always triggers a soils report requirement. The city wants to see how expansive clay will behave under your foundation. We bring in the geotechnical engineer, get the report, and build to the numbers. Contractors who skip this step save you a week and cost you a cracked slab.
One Contract for the Whole Envelope
We replaced a Colton roof, installed impact-rated windows, and repaired stucco cracks caused by clay movement on one home, all under a single contract. That’s the Stallion difference: the roofer, the window crew, and the stucco patch are our problem to coordinate, not yours. When the inspector walks the site, there’s one license on the permit, one warranty, and one accountable party.
Trusted Brands We Service in Colton
Stallion Contractors maintains direct partnerships with more than 50 trade-grade manufacturers, which means Colton customers get access to GAF and CertainTeed roofing systems, PGT impact windows, James Hardie siding, and Cambria and Silestone countertops without a middleman. We also bring forward-thinking prefab and ADU capability through partnerships with Dvele, Boxabl, and Mighty Buildings, so if your Colton lot won’t accommodate a traditional stick-built addition, we can evaluate a factory-built alternative that meets local wind and seismic requirements. Parts and materials arrive quickly because our supplier relationships are national, not regional. On a Colton timeline, that matters.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Colton Homes
- Expansive clay under slab foundations. Colton’s hillside lots sit on clay that swells in winter rain and shrinks during 100°F summer heat. If your addition or ADU plan skips the soils report, expect cracks within a few seasons.
- Under-rated roofing in the Santa Ana wind corridor. We regularly pull off shingles rated for 90 mph that simply shouldn’t be on a Colton roof. Wind-rated assemblies with proper underlayment are a code requirement here, and insurers do check.
- Poor drainage against slab-on-grade foundations. Colton’s flat older neighborhoods see ponding at the foundation line during winter storms because original grading settled. The fix is regrading plus a drainage plan, but it has to happen before the inspector signs off.
- Old electrical panels in 1940s – 1970s tract homes. Many Colton homes built before 1980 still run 100-amp panels that can’t handle a modern kitchen or ADU subpanel. We include panel upgrades in the scope instead of treating them as change orders later.
Pricing for General Contractor in Colton, CA
Colton pricing tracks the Inland Empire market, but hillside work and wind-rated materials push certain line items higher than flat-ground cities nearby. Below are the ranges we quote most often in Colton. These are installed costs, not labor-only figures.
| Project Type | Colton Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
What moves the number? A roof on a steep Reche Canyon pitch costs more than a single-story rancher near the I-10. Impact windows with PGT aluminum frames run higher than standard vinyl. A home addition that requires engineered foundation work on expansive clay will sit at the upper end of the range, and that’s the honest answer. Call (855) 600-3192 for a fixed line-item quote. Estimates are free, and we don’t pad the number after you sign.
We Also Serve Cities Near Colton
Stallion Contractors serves homeowners throughout the surrounding Inland Empire. If you’re in Grand Terrace, Highgrove, Loma Linda, or Rubidoux, the same team and the same brand-partner pricing apply. We’re based in Victorville and run crews throughout the region, including full-service General Contractor in Colton coverage and the neighboring communities.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Colton
Colton homes in the Santa Ana wind corridor require roofing materials rated for wind speeds at or above 110 mph, and in exposed hillside locations, 130-mph assemblies are prudent. That means mechanically fastened underlayment, upgraded shingle or tile fastening patterns, and edge metal sized to local code. We install GAF and CertainTeed systems with documented wind ratings so your roof meets both the city’s requirement and your insurer’s expectation. Call (855) 600-3192 to pull a quote with the specific rating your Colton roof needs.
Expansive clay in Reche Canyon swells when wet and shrinks when dry, which exerts significant pressure on slab edges and foundation walls. Colton requires a soils report for most hillside additions, and the recommended fix is usually deeper footings or a post-tensioned slab designed for the site’s specific clay expansion index. Skipping the report saves upfront cost but produces foundation cracks within two or three seasonal cycles. We include the geotechnical work in our fixed quote, so there’s no surprise change order.
A kitchen or bathroom remodel in Colton typically requires a building permit for any plumbing, electrical, or structural work. That includes moving drain lines, upgrading circuits, opening load-bearing walls, or changing window openings. The city will inspect rough-in work before drywall and final work before sign-off. We pull the permits in our name, schedule every inspection, and hand you a closed permit file at the end. Call (855) 600-3192 and we’ll tell you exactly which permits your specific project triggers.
Documented wind and seismic upgrades can reduce your Colton insurance premium, but only if the paperwork is complete. Insurers look for engineering letters, permit sign-offs, and product specifications showing your roof, windows, and bracing meet current code. We provide that documentation as a standard part of the job, not an extra. The homeowner in Reche Canyon whose roof replacement and seismic retrofit we completed used our closed permit file to demonstrate wind-loss compliance, and their insurer kept the premium flat. If your insurer offers a discount, the documentation is what triggers it.
A compliant Colton general contractor quote includes the soils report and foundation engineering (when hillside work applies), permit fees, wind-rated material specifications with manufacturer documentation, drainage/grading line items, and a written inspection schedule. Cheap quotes typically omit the soils report, specify 90-mph shingles, leave drainage out entirely, and treat permit fees as “extra.” The difference isn’t hidden margin; it’s work that the cheap bid never planned to do. Call (855) 600-3192 for a line-item quote that shows you exactly what’s included before you compare anything.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Colton and the Inland Empire.