Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Fullerton, CA | Stallion Contractors
If you’re searching for Ameristar construction service in Fullerton, you’re likely dealing with peeling cabinet doors, a swollen sink base, or counters that cracked at the sink cutout. We’re Stallion Contractors, and we install, repair, and replace Ameristar cabinetry and countertops across Fullerton’s older housing stock every week. The difference here is that we work independent of any manufacturer program, which means our advice about your Ameristar kitchen is based on what holds up in Fullerton’s heat-cycled, inland-basin homes, not on what a showroom wants to sell. Call (855) 600-3192 for a free estimate.

Why Fullerton Residents Choose Us for Ameristar Service
Ruben Montoya, our owner, grew up around Colton and learned finish carpentry from his father, so cabinet work isn’t abstract to us. We’re Ameristar sales & service providers who’ve handled enough of their product lines to know what fails and what doesn’t. Fullerton kitchens run hot. South- and west-facing rooms catch Santa Ana heat, and cabinets without shade take a beating. We’ve pulled swollen sink bases out of 1920s Craftsman bungalows near downtown and re-leveled counters in mid-century tract homes where the original framing was never square. That field experience means we can tell you in the first visit whether a cabinet box is worth saving or should be replaced outright.
Styles & brands we work with







Common Ameristar Construction Problems We Solve in Fullerton
- Peeling thermofoil door skins. Ameristar shaker lines like Lenox and Gramercy use thermofoil on door faces. When Santa Ana heat cycles push an unshaded Fullerton kitchen past 95°F, that thermofoil starts blistering along the lower cabinet doors. We replace the doors with OEM Ameristar skins and advise on finish choices that hold up better in west-facing rooms.
- Swollen particleboard sink bases. In pre-1950 bungalows across Fullerton, galvanized supply lines sweat behind the cabinet back and drip into the toe-kick. The particleboard core absorbs that moisture and swells until the cabinet floor bows. We’ve found this on more Fullerton remodels than we can count, and the fix is a new sink base, re-plumbed lines, and usually a matching drawer front.
- Hairline cracks at countertop sink cutouts. Ameristar’s engineered-stone tops will crack at the undermount clamps if an installer over-tightens against an unlevel original frame. Mid-century tract homes in the 92833 and 92835 areas often have floors that have settled a quarter-inch since 1955. We shim and level before the top goes down, which most crews skip.
- Loose hinges and binding drawer glides. Full-overlay Ameristar hardware expands and contracts with Fullerton’s summer heat. In unconditioned additions, especially converted garages and sunrooms, the hinges loosen and glides bind within a few years. We replace with quality aftermarket soft-close hardware when the originals are end of life.
- Historic-district materials and finish requirements. Around the Downtown Fullerton Historic District, a cabinet refacing or countertop swap can require a materials and exterior-visibility submittal. Ameristar door styles and finishes get selected against that review calendar, not just the showroom sample. We handle the paperwork on our end.
Ameristar Service in Fullerton: What Local Conditions Mean for Your Equipment
Fullerton is two different construction markets wearing one city name. Downtown, the preserved turn-of-the-century core around the Fox Theatre block and Villa del Sol operates under an active historic-preservation review process. Remodeling a kitchen there means door styles, finishes, and even cabinet colors get scrutinized by the city’s review board before work starts. The rest of Fullerton, the post-war and mid-century tracts across 92831, 92833, and 92835, is a different animal entirely: deferred-maintenance older housing where opening a wall triggers permit and code-upgrade scope. That split means an Ameristar cabinet job in one Fullerton neighborhood may need a preservation submittal, while three miles north you’re dealing with knob-and-tube wiring discovered behind the cabinet runs. We plan for both from the first site visit.
Ameristar Models & Products We Service in Fullerton
We install and service the Ameristar lines most common in Fullerton’s homes: Lenox Shaker, Gramercy, Aberdeen, and Providence. For matching an existing kitchen, we source OEM Ameristar doors and drawer fronts so grain and color stay consistent. When the original hinges and glides have seen their full life, we specify quality aftermarket soft-close hardware rather than re-installing the same components that just failed. We’ll be direct with you: if the cabinet box is solid, we save it. If the particleboard has gone soft, replacement is the honest answer.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Fullerton
Here’s what Ameristar work typically costs in the Fullerton market. These are line-item ranges, not vague “project” numbers:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost: how many cabinet boxes need replacement, whether the existing framing is level enough for stone tops, and whether your Fullerton home sits in the historic-district review zone, which adds submittal time. A free estimate from us is a written line-item quote, not a verbal ballpark. Call (855) 600-3192 to schedule one.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and also handle Ameristar in Anaheim, La Habra, Placentia, and Brea. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Fullerton
Can Ameristar cabinets be installed in a Fullerton historic-district kitchen without triggering a full preservation review? No, not reliably. A kitchen remodel or cabinet replacement on a property within the Downtown Fullerton Historic District view area will typically require a materials and exterior-visibility submittal to the city’s preservation staff, even if you’re keeping the original footprint. That review applies to door styles, finishes, and sometimes wood species. We prepare the submittal as part of the job, which keeps your schedule from stalling. Call (855) 600-3192 and we’ll check your address against the district map before quoting.
Why are my Ameristar cabinet doors peeling along the bottom in my Fullerton kitchen? Peeling along the lower cabinets is thermofoil delamination, and in Fullerton it’s almost always heat-driven. South- and west-facing kitchens without shade push past 95°F during Santa Ana events, and the thermofoil adhesive on Ameristar shaker doors releases from the MDF substrate. We replace the doors with OEM Ameristar skins and, if the room runs consistently hot, we’ll recommend a finish that tolerates heat cycling better.
My Fullerton home is a mid-century tract house – will Ameristar cabinets fit the existing wall framing? Usually, with shimming. Mid-century tract homes in Fullerton have framing that’s rarely square after 60-plus years, so Ameristar cabinets need careful leveling at installation. We shim the boxes, not the doors, so the faces align cleanly. If you’re replacing one run rather than the whole kitchen, we’ll match the new boxes to the existing ones and correct the leveling as we go. Call (855) 600-3192 for an assessment of your specific walls.
Do Ameristar countertops need a different substrate in Fullerton’s hotter inland climate? Ameristar’s engineered-stone tops don’t need a different substrate, but the installation does need to account for heat expansion and settled floors. We check the cabinet tops for level before setting stone, and we don’t over-tighten undermount clamps, which is the single most common cause of hairline cracks at sink cutouts in Fullerton’s mid-century homes. The substrate stays standard; the prep is what changes.
Can you match an existing Ameristar kitchen when only one cabinet box failed? Yes, if the model is still in production. For Lenox, Gramercy, Aberdeen, and Providence we order OEM Ameristar doors and drawer fronts so the finish and grain match the rest of the kitchen. If the box itself has swollen or the door skin has delaminated, we replace only what’s needed. We’ll tell you straight whether a patch job makes sense or whether the whole lower run should go. Call (855) 600-3192 and we’ll come look at the damage.
Service Areas Near Fullerton
Our crews cover Fullerton and the surrounding Orange County and Inland Empire areas, including Ameristar service in Canyon Lake, Ameristar service in Valle Vista, plus Colton, Bloomington, and Loma Linda. If you’re near any of these areas, Fullerton service area coverage extends to your project too. Call (855) 600-3192 and we’ll confirm availability.
Book Your Ameristar Service in Fullerton Today
Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing. If you have Ameristar cabinets or countertops in a Fullerton home—or need Ameristar repair in La Habra—and something isn’t right, call us at (855) 600-3192 to schedule your free estimate. We’ll look at the damage, give you a written line-item quote, and tell you what’s worth repairing versus replacing.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Fullerton and surrounding communities including Ameristar in Placentia.