Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Bloomington, CA | Stallion Contractors
We provide independent Jerith fence installation, repair in Pedley, and gate hardware service across Bloomington, CA. The thing that changes Jerith work here? County jurisdiction. Bloomington is unincorporated San Bernardino County, and a fence line that touches a previously unpermitted addition can trigger a county as-built review before we even set the first post. If you need Jerith aluminum or vinyl fencing handled on a Bloomington lot, call (855) 600-3192 for a free estimate.
Why Bloomington Residents Choose Us for Jerith Service
Jerith aluminum and vinyl ornamental fencing has been made in the USA since the 1960s, and we’ve put it through enough Bloomington summers to know exactly where it fails. The racks, the posts, the gate hardware. Ruben Montoya, our owner, grew up in Colton and learned construction at San Bernardino Valley College, where the hands-on programs put him on real job sites before he had a business card. Two-plus decades later, his crew still treats fence work the way his father, a finish carpenter, treated trim: the last ten percent of the job gets more attention than the first ninety, a standard you’ll also find in our Jerith repair in Rialto.
On this page, you’ll find what we know about Jerith products in Bloomington specifically: how county permitting shifts fence projects, why powder coat chalks faster on east-west runs here, and what we do about posts leaning in our sandy soil after a winter rain. We’re a full-scope contractor, so if your fence project uncovers a bigger exterior issue, one crew handles it. From the kitchen to the roofline. For Jerith-specific work, that matters, because we’re already on site and already know the property.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Bloomington
- Aluminum picket racking and post-hole lean. Bloomington’s cinder-block-era soils go soft after a winter rain, and Jerith posts set shallow in sandy ground start leaning within a few seasons. We pull them, set proper concrete footings, and re-rack panels so the top rail runs true again.
- Powder-coat chalking and fading on sun-facing runs. East-west fence lines in Bloomington take relentless 100°F-plus summer UV plus Santa Ana dust abrasion. A Jerith aluminum fence that looked factory-fresh five years ago can chalk to gray along the top rail. We match OEM touch-up and replacement sections where the coating has gone past cosmetic.
- Vinyl privacy panels bowing, sagging, or cracking at the rout. Jerith vinyl fences with too few posts or undersized steel inserts don’t survive a hard Santa Ana season. We see panels cracked at the tongue-and-groove rout on tall runs behind Bloomington homes with open exposure to the west.
- Gate hinges and latches seizing or sagging. Heat expansion plus dust works its way into gate hardware quickly here, especially driveway gates hung off older garage-corner posts. We rebuild with Jerith OEM hinges and latches so the gate closes square instead of dragging.
- Non-permitted addition complications. A Jerith fence line that runs along a never-permitted garage conversion or ADU can pull the property into a county as-built review. We document setbacks and existing conditions before ordering panels, because un-racking a whole run to re-measure twice is a waste of your money.
Jerith Service in Bloomington: What Local Conditions Mean for Your Equipment
Because Bloomington is unincorporated San Bernardino County, a fence project that touches a lot line adjoining a never-permitted garage conversion or ADU can pull the whole property into a county as-built review. On Valley Blvd parcels, we measure and document fence setbacks before ordering Jerith panels, not after. That’s the difference between a clean install and a project that stalls at plan check for six weeks. Most Inland Empire crews never deal with this, because they work under city building departments. Bloomington runs through San Bernardino County Land Use Services, which has its own plan-check sequencing, its own inspection scheduling, and a keen eye for older homes where the original footprint doesn’t match what’s actually standing. If your Bloomington property has a detached garage, a shed, or an outbuilding that was never permitted, the fence line is often the first thing that calls attention to it. We handle that discovery up front.
Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing.
Jerith Models & Products We Service in Bloomington
We install and repair the Jerith lines you’re most likely to have on a Bloomington property: the Jerith Regis aluminum ornamental fence, the Jerith Baron aluminum ornamental fence, the Jerith Grandview vinyl privacy fence, and the Jerith Designer Series vinyl privacy fence. We match Jerith OEM posts, rails, and gate hardware for aluminum runs so racking and hinge geometry stay true. For vinyl, we use OEM panels and inserts where a run is still under warranty pressure. On older out-of-catalog sections, we’ll tell you straight: replacing a sagging bay or gate is usually smarter than chasing aftermarket fittings that never seat quite right. We also handle full Jerith sales & service scopes, from new installs to hardware-only repairs.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Bloomington
What you’ll pay depends on the run length, post spacing, gate count, and whether we’re repairing existing Jerith or starting fresh. For Bloomington lots, here are the ranges we work within:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
Post-setting in Bloomington’s sandy soil often means deeper footings than factory spec, and that adds a little labor, but it’s why our Jerith runs stay true through rain seasons and Santa Anas, just like our Jerith service in Glen Avon. Every estimate is free and line-itemed, so you see the concrete, the panels, the hardware, and the labor separately. Call (855) 600-3192 to schedule yours.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Bloomington
Yes. Bloomington runs on San Bernardino County Land Use Services, not a city building department, so we handle county plan checks, setback documentation, and as-built discovery as part of the fence scope. Call (855) 600-3192 and we’ll walk your lot before you commit to anything.
Aluminum Jerith fence installation in Bloomington typically runs $4,000 to $10,000 depending on run length, post spacing, and gate count. Most residential runs take one to three days once posts and panels are on site. Call (855) 600-3192 for an exact quote, free.
Santa Ana wind loads on a tall run with too few posts, or posts with undersized steel inserts, will bow vinyl panels until the rout cracks. We re-post and replace the affected bays with Jerith OEM panels so the run holds its line.
Often, yes. If the gate frame is still square and the rack damage is limited to pickets or hinge mounts, we can rebuild with OEM Jerith hinge hardware and re-rack the panel to true. If the frame itself is twisted from a hard wind event, replacement usually costs less than repeated repairs.
We do. Lots off Valley Blvd with detached garages, sheds, and outbuildings are common in Bloomington, and those property lines tend to have non-permitted additions nearby. We measure and document setbacks before ordering, so your fence install doesn’t accidentally trigger a county review you weren’t ready for. Call (855) 600-3192 to schedule a look.
Service Areas Near Bloomington
We run Jerith fence service throughout the western San Bernardino Valley. That includes Colton, Loma Linda, Redlands, Mentone, and San Antonio Heights. If you’re in Jerith service in Mentone or Jerith service in San Antonio Heights, the same crew and the same OEM parts approach apply. For the full coverage map, see our Bloomington service area page.
Book Your Jerith Service in Bloomington Today
We serve Bloomington’s tract homes and rural-residential lots with OEM Jerith parts and a crew that knows county permitting, plus Jerith service in Fontana. Call (855) 600-3192 to schedule your free estimate, and we’ll measure the line before you order a single panel.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Bloomington and the Inland Empire.