Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Wrightwood, CA | Stallion Contractors
We provide independent Jerith fence and railing installation, repair, and replacement across Wrightwood, and the thing that separates our Jerith work up here from any flatland contractor is this: we build and repair for freeze-thaw, snow load, and Chapter 7A fire-clearance review, not just for a clean post line. Wrightwood’s 6,000-foot elevation and burn-risk corridor change how footings get set, how panels get braced, and how a fence line gets cleared. That’s the Sherith conversation most contractors never have because they don’t work mountain lots. If you’re in 92397 and your Jerith fence is heaving, racking, or the gate won’t latch, call Ruben Montoya’s team at Stallion Contractors: (855) 600-3192.

Why Wrightwood Residents Choose Us for Jerith Service
We’ve worked enough Jerith vinyl and aluminum on the San Gabriel crest to know the difference between a fence failing because of bad installation and a fence failing because the mountain did what mountains do. Jerith’s Princeton and Berkshire vinyl privacy lines, their Nottingham aluminum ornamental, and their Jefferson picket and rail are all solid products when they’re set to spec. The problem is, spec for a Victor Valley lot and spec for a Wrightwood lot are two different things. Ruben Montoya grew up in Colton, where his father was a finish carpenter, and he learned early that the last ten percent of a job, the part nobody sees, is what keeps a fence plumb five winters later. We apply that same discipline to every Jerith service call we take in Wrightwood, whether we’re matching OEM posts and rails or rebuilding a gate that’s been dragging since spring thaw. We’re an independent Jerith service provider, not an authorized or warranty-endorsed one, and we’ll tell you straight when a repair beats a replacement, and when a rebuild with deeper footings is the only move that makes sense.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Wrightwood
- Post heave and rack from freeze-thaw: Shallow footings that were fine thirty miles down the hill in Phelan lift and twist when Wrightwood’s repeated freeze-thaw cycles work the concrete. The result is a Jerith run that’s gone out of plumb, with panels racked and gates that no longer square up. We over-excavate and set deeper pinned piers, and we check the post depth against the frost line, not against the cheapest bid.
- Snow-load deflection and rail sag on vinyl privacy runs: Jerith vinyl rails and pickets flex, but when heavy snow piles against a windward fence line and sits there for weeks, the bottom rails start to crack under the sustained weight. We see this on the Princeton and Berkshire lines especially, where long runs catch the prevailing wind off the crest. We brace, re-rail, and reset those sections, and we’ll tell you if the whole run needs rethinking.
- UV and cold-embrittlement cracking on older panels: Sun exposure at 6,000 feet plus sub-freezing winters ages Jerith vinyl faster than the manufacturer’s coastal assumptions would suggest. Fifteen- to twenty-year-old panels get brittle enough to shatter on impact instead of flexing. We match OEM where the profile is still in production, and we source quality aftermarket for discontinued lines.
- Gate hardware and hinge corrosion: Snowmelt and freeze-thaw cycles seize gate hinges and swell gate frames so gates drag, won’t latch, and eventually pull the hinge posts loose. On sloped Wrightwood lots, a dragging gate isn’t a nuisance, it’s a structural problem. We rebuild the post, upgrade the hardware, and set the gate so it clears a mountain winter cleanly.
- Racked panels on wooded, sloped lots: When a Jerith fence runs across a sloped, wooded Wrightwood parcel, the panels have to accommodate grade changes that a flat-lot installer never deals with. We step and rack Jerith panels the way the terrain demands, not the way a product brochure assumes.
Good work doesn’t need a sales pitch. It needs the right materials and someone who knows what they’re doing. On a Wrightwood Jerith fence, that means footings deep enough to beat the frost and panels set to survive snow load.
Jerith Service in Wrightwood: What Local Conditions Mean for Your Equipment
Wrightwood sits in the 92397 burn-risk corridor along the Angeles National Forest edge, and that changes the entire conversation around exterior work, including Jerith fencing. Chapter 7A fire-resistant construction and defensible-space rules apply to mountain homes here in a way they don’t apply down the hill in Phelan or Hesperia. For a fence, that means the fence line has to be cleared back to a defensible-space setback, and the sequencing of any fence, re-roof, or exterior project has to anticipate fire-clearance review, not fight it. Up off the wooded cabin streets near the Angeles National Forest edge, we took on a Jerith vinyl privacy fence replacement where the original posts had heaved and the panels racked out of plumb after several freeze-thaw winters. Our crew pulled the shallow old footings, over-excavated and set deeper pinned concrete piers to survive frost movement and snow load, and hung fresh Jerith panels and a rebuilt gate with upgraded hinges so it would latch clean through a mountain winter. We also cleared the fence line back to a defensible-space setback so the run met the corridor’s fire-clearance expectations rather than fighting them. That’s Wrightwood construction: same Jerith product, completely different set of rules. See our Jerith sales & service page for more on how we approach the brand across Southern California.
Jerith Models & Products We Service in Wrightwood
We install and repair the full Jerith vinyl and aluminum lines: Princeton vinyl privacy, Berkshire vinyl privacy, Nottingham aluminum ornamental, and Jefferson vinyl picket and rail. On the parts side, we match OEM Jerith posts, rails, pickets, and gate hardware where the profile is still in production, so the fence stays uniform and warrantable on the manufacturer side. For discontinued profiles, we source aftermarket components that meet the same wind and load spec, and we’re upfront about the difference. What gets stocked locally for Wrightwood turnaround depends on the season: late fall and winter, we keep more post and gate hardware on hand because freeze-thaw and snowmelt are the active failure modes. Summer months, we see more UV and embrittlement calls. We know what the mountain does to Jerith, and we stock accordingly. Beyond fencing, we’re the same contractor Wrightwood homeowners call for Wrightwood service area work that spans the whole property, from kitchens to rooflines.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Wrightwood
Jerith fence repair costs in Wrightwood vary by what’s failed. A localized post or gate hardware fix runs on the lower end of the scale; a racked run with shallow footings that need over-excavation and deeper pier work costs more because the labor and concrete are real. Here are the ranges we work within across the projects we handle up here, and these are honest numbers, not teaser bids:
| Project | Wrightwood Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
| Bathroom Remodel | $9,000 – $28,000 |
| Cabinet Installation | $4,000 – $13,000 |
What drives cost on a Wrightwood fence: footing depth relative to frost, grade changes on sloped lots, access up mountain roads, and whether the run needs defensible-space clearing. Every free estimate includes a written, line-item quote and a straight answer on repair versus replacement. Call (855) 600-3192 to schedule yours.

Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Wrightwood
Yes, and it shows up in two ways: on a re-roof, Chapter 7A in the 92397 burn-risk corridor requires ember-resistant venting and fire-resistant materials, which changes both what we specify and how we sequence the project against fire-clearance review. On a Jerith fence, the requirement shows up as a defensible-space setback: the fence line has to be cleared back from the structure and from adjacent wildland vegetation, and we plan that clearance into the quote so you’re not surprised later. Call (855) 600-3192 and we’ll walk your specific lot and corridor requirements before we write anything.
Because the original footings were almost certainly too shallow for Wrightwood’s freeze-thaw cycle. Water gets into the soil around the post, freezes, expands, and lifts the concrete; when it thaws, the post settles slightly out of position. Repeat that a few dozen times across a couple of mountain winters, and the whole run racks out of plumb. The fix is over-excavating and setting deeper pinned piers below the frost line, then re-hanging the Jerith panels square on the new posts. We do this regularly in Wrightwood, and we’ll tell you if your existing run can be salvaged post-by-post or needs a full rebuild.
We repair localized panel and gate failures when the posts and footings are sound. On a sloped lot, that means checking every post in the affected run for movement, not just the one that looks bad. When freeze-thaw has racked the whole run and the footings are shallow, patching panels just kicks the failure down the road, and we’ll recommend a rebuild with deeper, correctly pinned footings. The goal is a fence that survives the next five winters, not one that looks fine until January. Call (855) 600-3192 for an honest assessment and a free estimate.
It changes our sequencing and our material choices. A cabin that sits unoccupied through a snow season is going to take more abuse than a lived-in home: snow piles against the fence line and the roof, freeze-thaw works the footings, and no one is around to clear the weight or notice a gate dragging. We plan for that. We specify materials and post depths that survive unattended winters, and on the roofing and exterior side, we account for deferred maintenance and snow-load stress before we write the quote. Your cabin gets built or repaired for the worst weeks it’ll face, not the best ones.
A standing seam metal roof is the most resilient roof we install in Wrightwood, and the metal roofing price range of $15,000 – $40,000 reflects the material and the mountain-grade installation it demands. Standing seam sheds snow cleanly, handles ice-dam conditions far better than standard shingles, and meets the fire-resistant material requirements that Chapter 7A enforces in this corridor. A standard roof replacement, at $8,000 – $20,000, still works here, but the snow-load and ember-resistant venting requirements have to be engineered in, not skipped. Call (855) 600-3192 to get a written roof assessment for your specific cabin or mountain home.
Service Areas Near Wrightwood
We serve Wrightwood and the surrounding mountain communities, and our Jerith work extends down the hill to Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, and Redlands. Each area has its own footing and frost realities, but the Jerith product knowledge travels. See Jerith service in Running Springs and Jerith service in Muscoy for how we handle the brand in those communities.
Book Your Jerith Service in Wrightwood Today
If your Jerith fence is heaving, racking, or the gate won’t latch, call (855) 600-3192 to schedule a free estimate. We’ll assess your run against Wrightwood’s actual conditions, give you a straight answer on repair versus replacement, and quote it in writing. From the kitchen to the roofline, one contractor, every trade.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Wrightwood and the San Gabriel Mountain communities.