Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in San Antonio Heights, CA | Stallion Contractors
We handle Belgard paver driveway, patio, and retaining wall work throughout San Antonio Heights, and we’ve been doing it long enough to know what this specific foothill terrain does to hardscape. The short version: San Antonio Heights sits in an unincorporated county pocket with a high fire-hazard severity rating, so every Belgard project here has to clear County of San Bernardino review, not a city permit, and often needs geotechnical sign-off on drainage and slope stability. That changes how we prep the base, what edge treatments we use, and which Belgard product lines we recommend. Call (855) 600-3192 for a free estimate, or keep reading and we’ll walk you through what your project actually requires.
Why San Antonio Heights Residents Choose Us for Belgard Service
We’re an independent Belgard service provider, which means we don’t answer to a manufacturer’s sales targets or a franchise playbook. What we do answer to is the finished surface on your property. Stallion Contractors has installed, repaired, and replaced Belgard in Upland and across San Antonio Heights for years. Ruben Montoya, our owner, grew up in Colton and cut his teeth on Inland Empire job sites through San Bernardino Valley College’s construction programs, then spent two-plus decades learning exactly what this soil and sun do to concrete, pavers, and wall block. That local grounding matters when a Lafitt Rustic Slab driveway starts showing edge settlement or a Weston Stone wall leans after a wet winter.
Our crews know Belgard’s engineering specs, the OEM parts pipeline, and the failure patterns that show up on San Antonio Heights properties specifically. We’re not authorized by Belgard, and we won’t pretend otherwise. We’re a general contractor with full hardscape capability backed by Belgard sales & service knowledge that comes from pulling real permits and passing real county inspections here, not from a marketing deck.
Styles & brands we work with
Common Belgard Construction Problems We Solve in San Antonio Heights
Here’s what we see most often on San Antonio Heights properties, and why this particular foothill makes each one worse:
- Edge spalling and paver settlement on sloped driveways. The decomposed granite under most San Antonio Heights lots doesn’t compact the way flat-land clay does. When a driveway base isn’t built for that soil and the seasonal runoff that cuts across hillside parcels, edges start to crack and drop. We re-level, re-compact with geotextile separation, and re-lay the pavers so water sheds instead of pooling.
- Efflorescence on Lafitt pavers after Santa Ana wind cycles. Hot inland summers followed by wind-driven moisture and winter fog pull salts up through the paver surface. It shows as a chalky white haze on Lafitt Rustic Slab. We treat the source, not just the cosmetics, and we don’t mask it with a sealer that will peel in two seasons.
- Weston Stone retaining wall lean or separation. On hillside lots with expansive soils, a wall built without proper geogrid and behind-wall drainage will start to lean within a few years. We rebuild with the drainage column and grid layers the original install skipped.
- Surface staining and color fade on Urbana pavers from wildfire ash. Defensible-space clearing and ember-resistant code requirements mean heavy equipment and ash fall work their way onto Belgard surfaces. We clean, re-sand, and re-seal with products suited to San Antonio Heights’ fire-zone conditions.
- Driveway base failure from runoff undermining. The unincorporated county doesn’t have the storm drain density of incorporated cities. Driveways here carry more water than they were designed for. When a base washes out, we regrade and install a county-compliant drainage swale before any paver goes back down.
Belgard Service in San Antonio Heights: What Local Conditions Mean for Your Equipment
Here’s the thing most Belgard pages won’t tell you: every Belgard paver driveway or patio in San Antonio Heights has to pass County of San Bernardino building and public works review, not a city hall counter. That’s because San Antonio Heights is an unincorporated island, and on hillside parcels the county often pushes the project into geotechnical review for slope stability and drainage. Combined with the high fire-hazard severity zone designation, this means your Belgard installation gets checked for ember-resistant edges and proper water shedding in ways a comparable Belgard repair in Claremont or Redlands lot never would. It also means the edge restraint, the base depth, and the permeable sand choice aren’t optional upgrades here. They’re what gets your project signed off.
On a sloped lot off Beverly Drive, we replaced a failing Lafitt Rustic Slab driveway where winter runoff had undermined the base and caused widespread edge settlement. After regrading and installing a county-compliant drainage swale, we re-laid the pavers on a compacted aggregate base with geotextile separation, then sealed with an ember-resistant polymeric sand to meet wildfire code. The homeowner now has a stable, defensible driveway that passes county inspection and sheds water away from the foundation. That’s the difference between installing Belgard in Rancho Cucamonga and installing Belgard for San Antonio Heights.
Belgard Models & Products We Service in San Antonio Heights
We work on the Belgard lines that actually perform in this terrain: Lafitt Rustic Slab pavers, Urbana Stone pavers, Weston Stone wall block, and Mega-Lafitt wall block. When a repair calls for matching material, we source OEM Belgard pavers and blocks through authorized distributors so the color, dimension, and engineering match what’s already in the ground. We don’t substitute whatever’s on the shelf. For base work and joint sand, we use aftermarket polymeric sands and aggregate specified for San Antonio Heights’ reactive soils. If a section of your driveway fails and the rest is sound, we’ll match it. If the whole base is shot, we’ll tell you that too, and we’ll rebuild it so it doesn’t fail again.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in San Antonio Heights
Here are the price ranges we work within for Belgard projects in the San Antonio Heights market. These are real- world numbers calibrated to what county-level permitting, hillside prep, and the product itself actually cost here:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives the final number is the condition of your subgrade, whether the county requires geotechnical review, and how much drainage work the parcel needs. A free estimate from us includes a site walk, a base assessment, and a written line-item scope. Call (855) 600-3192 and we’ll get you an exact number for your San Antonio Heights property.
Serving San Antonio Heights, CA — Our Local Coverage Area
We’re based in the San Antonio Heights area and offer Belgard service in Montclair and nearby communities we know well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in San Antonio Heights
Yes. The high fire-hazard severity zone requires ember-resistant materials at edges and joints, plus drainage details that keep water from pooling against a structure. We use ember-resistant polymeric sand and edge restraints that meet wildfire code on every Belgard install here. Call (855) 600-3192 if you want to know what your specific parcel requires.
San Antonio Heights projects pull county permits, not city ones, and hillside parcels often add a geotechnical review step for slope and drainage. Expect an extra one to three weeks on the front end depending on the county’s current review queue. We handle the permit package, the geotech coordination, and the inspections. Call (855) 600-3192 and we’ll walk you through the exact path for your lot.
Most failures come down to missing geogrid and behind-wall drainage. Expansive foothill soils hold water and push against the wall, and without a drainage column the hydrostatic pressure eventually separates the blocks. We rebuild with proper grid, drain pipe, and gravel so the wall does its job without leaning. Call (855) 600-3192 for a wall assessment.
In most cases, yes. We source OEM Belgard pavers through authorized distributors, so the color and dimension match the existing surface. Where the original line has been discontinued, we’ll find the closest current match and verify it on-site before any work begins. Call (855) 600-3192 and we’ll take a look at the section in question.
Plan on $5,000 to $14,000 for a full driveway replacement, depending on slope, drainage work, and county-required geotechnical review. A new paver driveway install runs $7,000 to $18,000. Call (855) 600-3192 for an exact quote, and the estimate is free.
Service Areas Near San Antonio Heights
We serve San Antonio Heights and the surrounding Inland Empire foothill communities. That includes San Antonio Heights service area itself, plus Colton, Bloomington, Mentone, Belgard service in Loma Linda, and Belgard service in Redlands. If your property sits on a slope anywhere in this corridor, we’re already familiar with the soil and the county requirements.
Book Your Belgard Service in San Antonio Heights Today
You need a contractor who knows Belgard and knows San Antonio Heights. One contractor, every trade. Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing. Call (855) 600-3192 for a free estimate on your Belgard driveway, patio, or retaining wall.
Written by Ruben Montoya, Owner at Stallion Contractors, serving San Antonio Heights and the surrounding Inland Empire.