Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in La Verne, CA | Stallion Contractors
We install and repair Unilock paver and wall systems across La Verne, and we’re independent – not tied to any manufacturer’s warranty program. That independence matters here because foothill drainage, tree canopy, and inland UV put different stresses on Unilock products than a flat-lot or coastal install ever sees. If you need a paver driveway, patio, or retaining wall built right for La Verne’s specific conditions, call Stallion Contractors at (855) 600-3192.
Why La Verne Residents Choose Us for Unilock Service
Most La Verne homeowners don’t need a contractor who just “does pavers.” They need someone who understands that a Brussels Block driveway on a west-facing slope off Wheeler Avenue behaves differently than the same product on a flat lot in the central grid. That’s the kind of distinction we live in every week. Ruben Montoya grew up in Colton, not far from Pepper Avenue, where half the houses on his block were built by tradesmen who knew exactly what Inland Empire soil and sun do to a hardscape job. He picked up his foundation in construction at San Bernardino Valley College, where the hands-on programs put him on job sites before he ever had a business card. Over two-plus decades, he’s built a reputation for structural honesty – no shortcuts on base prep, no material swapped out to pad a margin. Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing.
We’re a licensed general contractor, full-scope across interior and exterior work, and Unilock is one of the hardscaping brands we know deeply. That means we don’t just lay pavers. We rebuild bases, fix drainage, and repair what the last guy got wrong. When you call us for Unilock sales & service in La Verne, you’re getting the same crew that handles roofing, siding, and full remodels – one contractor, every trade, one point of accountability.
We also know the La Verne housing stock. The 1950s and 60s ranch homes on the flat central grid, the older custom and hillside homes climbing toward the San Gabriels – each brings different site conditions. Some have original concrete walks under old pavers. Others have sloped lots with mature oaks right at the property line. We plan for those before we ever order a pallet.
Styles & brands we work with
Common Unilock Construction Problems We Solve in La Verne
- Brussels Block fading and surface chalking. West-facing driveways in La Verne take brutal inland UV. After a few summers, unsealed Brussels Block pavers start to chalk and lose color. We re-surface, re-sand, and seal with a product matched to the paver’s finish – and we tell you honestly if resealing is worth it or if replacement makes more sense.
- Beacon Hill retaining walls failing at the base course. On sloped foothill lots north of Foothill Blvd, hillside runoff is the enemy. Without proper drainage aggregate and geogrid behind the wall, the base course shifts and the wall starts to lean. We rebuild those walls with drainage as the first priority, not an afterthought.
- Richcliff and Elegance pavers cracking over old concrete. A lot of La Verne’s central-grid homes have 1950s-70s concrete walks that someone put pavers on top of. If the base isn’t rebuilt for drainage and compaction, those pavers crack and settle within a couple seasons. We pull the old surface, prep the base properly, and re-set.
- Polymeric joint sand eroding on Santa Ana wind corridors. Corner lots and parkway strips in La Verne get hammered by Santa Ana winds. Loose or poorly cured joint sand blows out, pavers shift, weeds move in. We use the right sand for wind exposure and make sure it’s properly activated.
- Heaving driveways from trapped hillside runoff. On hillside lots, water moving downslope can pump through paver joints and undermine the base. The result is a wavy, uneven driveway. We rebuild with open-graded aggregate, geogrid, and a drainage outlet – not just a fresh layer of sand.
Unilock Service in La Verne: What Local Conditions Mean for Your Equipment
Here’s something a flat-lot contractor from the Unilock in Pomona Valley floor never has to think about. On the foothill streets north of Foothill Blvd, mature oak and sycamore canopies drop leaves and push shade that keep Unilock paver joints damp far longer than on the flat, sun-blasted grid below. That shade sounds nice in July, but it changes how you detail a paver installation. Organic debris sits in the joints, holds moisture, and breaks down polymeric sand faster than heat alone ever would. So joint-sand choice and drainage detailing have to account for organic debris load, not just UV. We specify coarser, faster-draining sand blends under tree canopy and add drainage channels where leaf litter would otherwise clog the system. That’s not a manufacturer-spec decision. It’s a La Verne decision.
One hillside job off Wheeler Avenue comes to mind. The original Brussels Block driveway was heaving because the base had no drainage outlet and hillside runoff was pumping through the joints. We rebuilt that base with open-graded aggregate and geogrid, tied it into a new swale, and re-set the pavers with Unilock edge restraints. Two winters later, the surface is still flat and the joints hold. That’s what we mean when we say La Verne work needs local knowledge.
Unilock Models & Products We Service in La Verne
We work with the Unilock product lines most common in La Verne: Brussels Block, Beacon Hill, Richcliff, and Elegance. Each one has different tolerances, different joint-spacing requirements, and different failure points under inland heat and hillside drainage. We source Unilock’s own compatible edge restraints, joint sand, and wall caps where the profile and color must match – no point faking a color that won’t hold up. If you need Unilock in Upland or nearby, the same sourcing rules apply. But we use quality aftermarket base aggregates and geogrid when they perform better in La Verne soil, which they often do. If an existing Unilock surface can be re-leveled and re-sanded instead of torn out, we’ll say so plainly. That’s the independent approach: the right fix, not the most expensive one.
We keep common Unilock profiles and joint materials staged for fast turnaround across the La Verne service area, which cuts a lot of waiting on smaller repairs and re-levels.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in La Verne
Cost depends on site access, base condition, drainage work, and paver profile. On a hillside lot, expect base rebuild and drainage to add to the total – on a flat central-grid lot, you’re mostly paying for tear-out and re-set. Here’s what we quote across La Verne for Unilock construction:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
Every estimate is free, written, and line-itemed. No change orders hidden in the fine print. Call (855) 600-3192 and we’ll walk the site and give you real numbers for your specific lot.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well, and we also handle Unilock service in Montclair. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in La Verne
Yes. La Verne’s inland UV is far more intense than anything in coastal Los Angeles, and west-facing surfaces take the brunt of it. Unsealed Brussels Block pavers will typically chalk and fade within a few summers here. We recommend sealing on a schedule matched to your lot’s exposure, and we’ll tell you honestly if a re-seal buys you time or if the surface is too far gone.
Sometimes, but not if the slope is steep enough that the sub-base will creep or wash out. The grade, the soil, and the drainage all decide that. A gentle slope with a solid base and good drainage can work without a wall. A lot with a real drop will need a Beacon Hill retaining wall or a stepped design to hold the patio flat. Call (855) 600-3192 and we’ll look at the site before you spend a dollar on materials.
That’s surface chalking from intense inland UV – the top layer of the paver is oxidizing. It’s common on west-facing La Verne driveways that were never sealed. The fix is usually re-surfacing and sealing, but the condition of the base matters too. If the pavers are also shifting, the base needs work first. We’ll tell you which problem you actually have.
La Verne protects mature oaks and sycamores, especially on the foothill streets. That means we often can’t cut roots for a paver base, and we have to design around the root zone instead of through it. That changes the dig depth, the drainage plan, and sometimes the paver layout. We know how to work within those rules and keep the tree healthy while still building a surface that won’t heave in two years.
For most La Verne homes, yes. Pavers flex with thermal expansion instead of cracking like a concrete slab, and they drain better, which matters when the Santa Anas hit and then the rare heavy rain follows. The catch is that the base and joint work have to be right from day one. A cheap paver job in La Verne fails faster than a cheap concrete pour. Call (855) 600-3192 for an exact quote – estimates are free.
Service Areas Near La Verne
We run Unilock service throughout La Verne’s 91750 and into the surrounding foothill and valley communities. If you’re nearby in Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, or Redlands, we cover those areas too. For projects east of here, see our Unilock service in Riverside and Unilock service in Moreno Valley pages for local specifics.
Book Your Unilock Service in La Verne Today
We’ll walk your lot, check the base, and tell you what this job actually needs – not what the showroom wants to sell. Call Stallion Contractors at (855) 600-3192 to schedule your free estimate in La Verne or for Unilock repair in Claremont.
Written by Ruben Montoya, Owner at Stallion Contractors, serving La Verne and the Inland Empire since 2002.