Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Perris, CA | Stallion Contractors
We install, repair, and rebuild Unilock segmental retaining walls, paver driveways, patios, and permeable systems across Perris as an independent Perris General Contractor. The one thing that makes our Unilock work here different: we know the 92570 flats sit on former dairy ground that shifts, and we pull the parcel record before we touch a wall because half the addresses reading “Perris” are actually unincorporated Riverside County with different setback rules. If you’re planning a Unilock project or dealing with a leaning wall, call (855) 600-3192 for a free estimate.
Why Perris Residents Choose Us for Unilock Service
Most paver contractors in Perris will sell you a Unilock product and move on. We take a different approach, because Ruben Montoya runs our crews the way he learned it in the Inland Empire: check the soil first, trust the spec second, and never blame the block for a base failure. Ruben grew up in Colton, not far from Pepper Avenue, where the houses were built by tradesmen who understood Inland Empire sun and soil better than anyone. That foundation is why we treat every Unilock wall and paver job in Perris as a structure, not a decoration. We work from Unilock’s published installation specs, source genuine Unilock units for visible faces and color matching, and use quality aftermarket geogrid, filter fabric, and polymeric joint sand where the spec allows it. As an independent contractor, we’re not manufacturer-authorized, which means we tell you plainly when a failure is an installation defect, a soil problem, or a product issue. That honesty is what homeowners on the 92570 flats and in the newer 92571 subdivisions actually need. For Unilock work across the Perris Valley, see our Perris service area.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Perris
- Wall block face spalling and efflorescence. Perris sits in a hot, dry inland basin with intense summer heat. When irrigation overspray keeps block faces wet and the afternoon sun bakes them dry, the surface stress on Unilock Pisa2 and other wall block is constant. We see white efflorescence and face spalling far more often here than in coastal cities.
- Settlement and leaning on Pisa2 retaining walls. The former dairy ground in the 92570 flats is sandy and full of organic fill. If the base wasn’t excavated to undisturbed soil, or the drainage aggregate and weep points were skipped, the wall leans within a few seasons. We rebuild these correctly, and most Perris wall failures are below grade, not in the block itself.
- Paver joint sand washout and shifting. Strong afternoon winds and Santa Ana events blast sand out of paver joints on exposed driveways, then monsoon-style winter storms wash through what remains. If edge restraints were undersized, the pavers start drifting. We fix this with proper restraints and fresh polymeric joint sand.
- Color fade and surface wear on tumbled pavers. Perris UV is relentless, and wind-blown grit acts like sandpaper on unshaded west-facing patios. Brussels Block and Beacon Hill Flagstone pavers hold up well, but they fade and wear faster here than anywhere near the coast.
- Failed paver driveways with cracked slabs beneath. Older ranch homes and manufactured homes in the 92570 flats often have cracked concrete driveways that were never built for today’s car weights or Perris’s slab-stressing heat. We remove, regrade, and rebuild with a proper paver base.
Unilock Service in Perris: What Local Conditions Mean for Your Equipment
A lot of addresses that read “Perris, 92570” actually sit in unincorporated Riverside County with well and septic and county setbacks, so before we build a Unilock retaining wall or paver driveway we pull the parcel record. A wall height or setback that’s fine under city rules can fail a county inspection, and the difference decides how deep the footing and geogrid go. This isn’t true in neighboring cities the way it is here. On a half-acre equestrian parcel off the 92570 flats, our crew rebuilt a leaning Pisa2 retaining wall that had been set on graded fill with no drainage aggregate behind it. We pulled the block, re-excavated to undisturbed soil, reset the base course, added filter fabric, gravel, and weep points, and re-laid the units. We followed with a Brussels Block paver driveway apron tied into new edge restraints, and the wall has held through two Santa Ana seasons. That’s what Unilock work in Perris actually looks like: parcel records, soil checks, and a base built to survive the valley’s swings.
Unilock Models & Products We Service in Perris
Our Perris crews install and repair the Unilock lines that actually get used out here. Brussels Block for tumbled driveways and patios. Beacon Hill Flagstone for flagstone-look walkways and pool decks. Pisa2 for segmental retaining walls. Thornbury and Cambridge for heavier driveway and pool deck applications. We source genuine Unilock block and paver units when we’re matching visible faces or adding to an existing patio. For below-grade work, we stock quality aftermarket geogrid, filter fabric, and polymeric joint sand locally so turnaround on Perris repairs doesn’t stall. If you’re considering a new Unilock installation or need genuine units for a repair, our Unilock sales & service covers the full scope.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Perris
Pricing depends on the condition of your existing base, access, drainage needs, and whether we’re matching existing Unilock units or starting fresh. Here’s what Unilock in Mead Valley and Perris typically runs:
| Service | Typical Range in Perris |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives your number: the square footage, how much of the old base has to be excavated and hauled, drainage corrections, and whether we’re matching existing block or using new units. A free estimate includes a site walk, a parcel check if you’re near the county line, and a written line-item quote. Call (855) 600-3192 and we’ll come look at what you’ve got.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Perris
Can you match my existing Unilock Brussels Block when you add a paver patio in Perris? Yes. We source genuine Unilock Brussels Block units for any visible faces, and we match color as closely as the current manufacturing batch allows. If your existing pavers have years of Perris sun fading, we’ll talk through blending options so the new section doesn’t read as an obvious patch. Call (855) 600-3192 for a match assessment.
Why is my Unilock retaining wall leaning after only a few years in Perris? Almost always a base and drainage problem, not the block. In the 92570 flats especially, the sandy former dairy soil shifts when water isn’t routed behind the wall. If the base wasn’t excavated to undisturbed soil or the drainage aggregate and weep points were skipped, the wall starts leaning. We rebuild the base and drainage rather than swap block, because that’s what actually fixes it, unlike a quick Unilock repair in Romoland that might only address surface issues. Call (855) 600-3192 and we’ll tell you what’s behind the lean.
Does the city-versus-county jurisdiction line affect my paver driveway or retaining wall permit? Yes, and it’s a bigger deal in Perris than almost anywhere nearby. A 92570 address can be unincorporated Riverside County with different setback and wall height rules than the city of Perris would apply. We pull the parcel record before we bid, so the permit goes to the right authority and your wall height or driveway placement won’t fail inspection later. Call (855) 600-3192 to check your parcel.
How do Unilock pavers hold up to Perris heat and wind? The pavers themselves hold up well structurally. The failure points around here are the joint sand, the edge restraints, and the base. Santa Ana winds blow out joint sand, winter rain washes through, and if the restraints were undersized the pavers drift. We build with the wind and water in mind, which is why our Perris paver jobs use different restraint specs than a coastal install would.
Do you repair or replace a failing Unilock paver driveway? Depends on what’s failing. If the base is intact and the problem is joint sand washout and shifting, we repair it. If the base was never done right or the old concrete slab beneath is cracked and moving, we replace it. Our honest default is to fix what’s actually broke, not swap pavers that still have life. Call (855) 600-3192 for a straight answer on yours.
Service Areas Near Perris
We serve Perris and the surrounding Inland Empire communities, including Unilock service in Good Hope to the west, Unilock service in Morongo Valley out toward the hills, plus Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, and Redlands. Wherever you are in the Perris Valley drainage, we’ll come look at your site.
Book Your Unilock Service in Perris Today
Planning a new Unilock paver driveway, patio, or retaining wall in Perris or need Unilock repair in Sun City? Dealing with a leaning Pisa2 wall or a driveway that’s drifting? Call (855) 600-3192 to schedule your free estimate. We’ll walk the site, pull the parcel, and give you a written line-item quote. Good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Perris and the Inland Empire.