Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Bloomington, CA | Stallion Contractors
Tremron construction service in Bloomington means pavers, wall block, and caps installed or repaired by a crew that knows how this unincorporated county town actually behaves under heat, wind, and hard valley water. We are Stallion Contractors, an independent Tremron installer serving the 92316 ZIP, and we handle paver driveways, patios, and hardscape corrections on the older ranch-style lots and sub-quarter-acre parcels that define this area. If you’re dealing with settled pavers, joint washout, or efflorescence, call (855) 600-3192 for a free estimate.

Why Bloomington Residents Choose Us for Tremron Service
We’ve been correcting Tremron paver installations across the western San Bernardino Valley long enough to know where the brand’s product lines hold up and where they fail when the base prep gets skipped. Bloomington’s native soil is thin and silty over clay, and summer highs regularly push past 100°F. That combination punishes any hardscape job, but it absolutely wrecks a Tremron field installed without proper excavation and compaction. Our owner, Ruben Montoya, grew up in Colton and trained at San Bernardino Valley College, where the construction program put him on actual job sites before he ever handed out a business card. His father was a finish carpenter, and Ruben still pays more attention to the last ten percent of a job than most contractors pay to the first ninety. That carries into how we approach Tremron work here. We service what we install and we correct what other crews got wrong, and because we’re an independent installer with no manufacturer affiliation, our recommendations are built around your soil, your drainage, and your budget rather than a dealer program. Tremron sales & service is work we do with our own crews, never subbed out.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Bloomington
These are the failures we see most often on Bloomington properties, and each one ties back to a local condition rather than a defect in the pavers themselves.
- Efflorescence blooming on gray-toned Tremron pavers. Bloomington’s hard valley water and irrigation runoff leaves mineral deposits that turn a fresh Olde Towne or Capri field chalky white within the first season. It looks like the paver color failed, but it’s a water chemistry problem, and we treat it correctly instead of just sealing over the bloom.
- Sand-joint washout and edge-course creep on driveways. Older lots off Valley Blvd sit on thin, silty native soil, and when the base wasn’t compacted in lifts, the joints wash out and the field starts to creep at the edges. We see this constantly on sub-quarter-acre parcels where a previous owner poured a driveway over whatever dirt was there.
- Cap and wall-block separation after repeated heat cycles. Bloomington’s summer highs plus Santa Ana wind-driven dust packing into the joints puts constant pressure on wall block and caps. Hairline cracks and separated caps are the result, and they don’t fix themselves.
- Color fade and surface chalking on sun-exposed paver fields. South- and west-facing Tremron fields that get no shade and no sealer maintenance will fade and chalk faster here than almost anywhere else in the Inland Empire. The UV index combined with dust abrasion is relentless.
- Heaved or settled driveway sections where base failure runs deep. When the original base was barely two inches of native silt over clay, you get settlement and heaving that can’t be fixed by re-sanding joints. That’s a lift-and-rebase job, and we’ll tell you straight when that’s the only honest fix.
Tremron Service in Bloomington: What Local Conditions Mean for Your Equipment
Here’s what you won’t read on a manufacturer brochure. Bloomington is unincorporated, which means hardscape and flatwork projects here go through San Bernardino County Land Use Services rather than a city building department. County plan check will flag driveway widening or new paving that changes drainage or lot coverage on the older ag-adjacent parcels, so we photograph existing grade and drainage before a single Tremron paver comes off the pallet. That’s not a formality. On a ranch-style home near Valley Blvd with a detached garage on a cinder-block foundation, our crew tore out a heaved asphalt apron and re-based a Tremron Olde Towne driveway after finding the original sub-base was barely two inches of native silt over clay. We excavated to proper depth, compacted in lifts, set the pavers on a manufactured base with Tremron edge restraints, and the finished field has held flat through two summers of 100°F-plus heat with no joint washout. Most Inland Empire crews never deal with county jurisdiction quirks, but if you own property in Bloomington, you live with them on every project. Bloomington service area work means we plan for plan check before we plan for pavers.
Tremron Models & Products We Service in Bloomington
We install and repair the full Tremron hardscape range that shows up on Bloomington properties, including the Olde Towne and Olde English paver series, the Mega Oldenberg and Mega Bergerac large-format pavers, the Signature Series wall block and caps, and the Capri and Treviso tumbled paver lines. For repairs, we install genuine Tremron units and matching Tremron edge restraints and caps whenever a repair needs to blend into an existing field. For the layers Tremron doesn’t manufacture, we source quality aftermarket polymeric joint sand and base aggregate. We keep common Bloomington-spec materials staged locally so turnaround on mid-sized repairs doesn’t stall waiting on a distribution run. If a failure is isolated to a settled corner or a washed joint, we re-set and re-sand. If base failure runs under more than a small percentage of the field, honest repair-vs-replace math usually favors a full lift-and-rebase.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Bloomington
Hardscape pricing in Bloomington tracks the scope of the excavation, the depth of the base failure, and the square footage of the Tremron field. A fresh paver driveway costs more than a patio because the base requirements and edge restraints are more demanding. Here’s where typical Bloomington jobs land.
| Tremron Service | Typical Bloomington Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Every estimate includes a written scope with the excavation depth, base material, Tremron product line, and edge restraint specified, so you can compare line items without guessing. Call (855) 600-3192 for a free estimate and we’ll walk the site before we price the job.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Bloomington
It might, and it usually comes down to county permit history on the existing structure. Because Bloomington is unincorporated, a lot of older homes here have improvements (room additions, garage conversions, second units) that were never permitted, so a seemingly simple patio or driveway project can turn into a county as-built correction before the first paver goes down. We check for that upfront and adjust the project scope accordingly. Call (855) 600-3192 for a free site assessment.
No, and that’s by design. Stallion Contractors is an independent Tremron installer. We carry no manufacturer mandate, no dealer quota, and no incentive to push a product line that doesn’t fit your Bloomington lot. We recommend what actually works for your soil and drainage, then install it to spec.
Yes. When a repair needs to blend into an existing Tremron field, we use genuine Tremron units, matching edge restraints, and matching caps. For the layers Tremron doesn’t manufacture (joint sand, base aggregate, geotextile), we source quality aftermarket materials spec’d for Bloomington’s soil and heat.
Most isolated repairs, like a settled corner or a washed joint section, take one to two days including base correction and re-sanding. A full lift-and-rebase on a Bloomington driveway is a multi-day project because we’re excavating to proper depth, compacting in lifts, and re-laying the entire field. We’ll give you a start-to-finish timeline with the estimate.
A paver driveway installation in Bloomington typically runs $7,000 to $18,000 depending on square footage, access, and what we find under the existing surface. Driveway replacement with Tremron pavers lands between $5,000 and $14,000. The exact number depends on what’s under the asphalt or concrete right now. Call (855) 600-3192 for a free estimate and we’ll give you a written line-item quote.
Service Areas Near Bloomington
We serve Bloomington and the surrounding western San Bernardino Valley communities. That includes Colton, Loma Linda, and Redlands for full-scope Tremron hardscape work, plus Tremron service in Mentone and Tremron service in San Antonio Heights for residents in those areas who need the same independent, no-dealer-push approach.
Book Your Tremron Service in Bloomington Today
If your Tremron pavers are settling, washing out, or showing efflorescence, we’ll come look at the site and tell you exactly what’s going on. Call (855) 600-3192 to schedule your free estimate. Good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Bloomington and the western San Bernardino Valley.