Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Sun City
Sun City homeowners call us when a 1960s Del Webb ranch needs more than a handyman can handle: a hallway widened to 36 inches, a tub pulled for a curbless shower, a kitchen opened up without tearing down the wrong wall. We’re Stallion Contractors, and a general contractor in Sun City working these original 1961 – 1965 tract homes means knowing the slab is load-bearing, the supply lines are galvanized, and the homeowner is often living in the back bedroom while we work. Call (855) 600-3192 for a free, written estimate. We cover all of 92585, 92586, and 92587.

Why Stallion Contractors Is Sun City’s Preferred General Contractor Company
Ruben Montoya leads our Sun City work, and he knows what these homes do under a remodel. The original Del Webb plans were tight: narrow hallways, small bathrooms, single-pane aluminum windows, and galvanized piping that has reached end of life. A contractor who has never opened a Sun City wall thinks a doorway widening is trim work. Ruben knows better. Our crews have worked the streets off Cherry Hills Boulevard, Menifee Road, and McCall Boulevard enough to know which original floor plans have load-bearing interior walls and which ones allow a clean open-concept cut.
Homeowners in Sun City choose us because we phase our work around people who stay in the home. We run dust barriers, protect the path from the work zone to the living space, and schedule noisy demolition in short windows. When the resident is 75 and living in the back bedroom, that isn’t a courtesy; it’s the job. We also carry the trade-grade brand roster that matters on aging-in-place work: Cambria and Silestone countertops at comfortable heights, Kohler walk-in shower systems, and James Hardie siding for the exterior that 60 years of high-desert sun has finally baked through.
Styles & brands we work with







Remodeling Contractor in Sun City
A Remodeling Contractor in Sun City is doing more than updating surfaces; they’re correcting a 60-year-old house so the owner can keep living in it. The original 1961 – 1965 Del Webb ranch plans put hallways at 32 to 34 inches wide and bathroom doors at 28 to 30 inches. Today’s ADA clearances want 36 inches for a wheelchair or walker. Because these homes are slab-on-grade, widening that opening means cutting into a load-bearing wall, adding a header, and pulling a permit. A full bathroom remodel in Sun City runs $9,000 – $28,000; a small bathroom runs $5,000 – $12,000. Kitchen remodels here land between $14,000 – $45,000 depending on footprint changes and cabinetry grade.
Aging-in-Place Bathroom Work
The most common Sun City bathroom job is a tub-to-shower conversion with a curbless entry. That runs $3,500 – $10,000 and includes solid blocking in the walls for grab bars, slip-rated floor tile, and a bench drain set into the existing slab. On a 1963 ranch off Cherry Hills Boulevard, our crew converted a tub to a curbless walk-in shower, added blocking for grab bars, and widened the bathroom doorway to 36 inches while re-routing around galvanized supply lines that had reached end of life. We phased the dustiest demolition into two days while the homeowner stayed in the back bedroom, then walked the final rough-in through inspection sign-off before tile.
Kitchen Remodels That Work for Older Owners
Sun City kitchens are compact by modern standards. The original cabinets sit lower than current comfort heights, and the original layout often walls the kitchen off from the living space. A kitchen remodel here is usually about lowering the reach, raising the counter for comfortable prep without bending, and pulling one non-load-bearing wall for better sightlines. We price cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500, with Cambria and Silestone available directly through our brand partners.
Licensed General Contractor in Sun City
A Licensed General Contractor in Sun City is the difference between a remodel that passes inspection and one that quietly fails behind the walls. Every structural change on these slabs, including doorway widening, header installation, and any alteration to load-bearing walls, requires a Riverside County building permit. Stallion Contractors pulls the permits, schedules the inspections, and stands behind the work. We’re state-licensed, insured and bonded, and we manage every trade under one contract. That means the plumber cutting into the slab, the electrician pulling new circuits, and the tile setter are all our people, not vendors you coordinate between.
Full-Scope Home Remodels
Sun City homes need whole-home attention because the original assemblies have reached end of life. The roof is shallow-pitch and may have original flashing. The windows are single-pane aluminum that cook the interior in summer. The supply plumbing is galvanized steel. Multi-trade remodels, the ones we do most here, run from $45,000 – $130,000 for a whole-home remodel to $90,000 – $220,000 for an ADU. We work with Dvele and Boxabl on prefab and ADU options for property owners who want a faster build on a Sun City lot.
Exterior and Whole-Home Scope
From the kitchen to the roofline, one contractor handles it. Roof replacement in Sun City runs $8,000 – $20,000, and nearly every original home is due. Window replacement runs $4,500 – $15,000 for a full house of dual-pane vinyl or impact-rated units. Siding, fencing, and paver patios go through the same single contract. That matters when you’re coordinating a roof, windows, and an accessible bathroom in one year, not three separate vendors.

Trusted Brands We Service in Sun City
We keep our Sun City work tied to manufacturers that hold their warranties: Cambria and Silestone for countertops, Kohler for walk-in showers and bathroom fixtures, GAF and CertainTeed for roofing, and James Hardie for siding. For ADU buyers in Sun City, we work with Dvele and Boxabl on prefab construction. Because we stock and source these lines through direct partnerships, Sun City customers aren’t waiting on showroom backorders. Material selections are made with a contractor at the table, not a showroom salesperson.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Sun City Homes
- Load-bearing walls that look non-load-bearing. The original Del Webb floor plans hide structural posts inside narrow hallway walls. A contractor who starts cutting before checking can sag the roof. We always check the truss layout first.
- Curbless showers that pool water. Quoting a curbless shower on a 60-year-old slab without a bench drain and proper slope means water runs onto the original flooring and wicks into the baseboards. We build the slope and drain into the slab cut.
- Galvanized supply lines failing mid-remodel. We regularly find original 1963 galvanized pipes so corroded they’re down to a pencil-width opening. Opening a bathroom wall often means the supply lines need re-piping to PEX or copper before we close the wall back.
- Owners living in place with no dust plan. An elderly Sun City resident staying in the home during a remodel cannot have open demolition dust drifting into the bedroom. That requires negative air, zip-wall barriers, and phased scheduling, not just a tarp over the doorway.
Pricing for General Contractor in Sun City, CA
Sun City pricing tracks the age of the homes. A simple finish-update is rare because the underlying systems are 60 years old. Here’s what we quote in 92585, 92586, and 92587 right now:
| Project | Sun City Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
What moves the number is the permit and structural work: a doorway widening with a header adds $2,500 – $6,000 depending on what’s inside the wall. A curbless shower on slab adds drainage and slope work. We give you a written line-item quote before work starts. Call (855) 600-3192 and we’ll schedule a walkthrough at your Sun City home at no charge.
We Also Serve Cities Near Sun City
Our crews run from Sun City out to General Contractor in Sun City jobs in Quail Valley, Romoland, Good Hope, and Perris. If you’re just outside the 92585/92586/92587 boundary, we still cover your project. The same crew, the same permit process, the same single-contract scope. Reach us through our General Contractor page for the full service list.
Serving Sun City, CA — Our Local Coverage Area
We’re based in the Sun City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Sun City
No. On the original 1961 – 1965 Del Webb slab-on-grade homes, almost every interior wall carries some of the roof load, and widening an opening means cutting into framing. That requires a header and a Riverside County building permit with an inspection. A contractor who says otherwise is doing unpermitted structural work on your home. Call (855) 600-3192 and we’ll tell you whether your specific wall is load-bearing before any cutting starts.
A curbless walk-in shower in Sun City runs $4,500 – $12,000 as a new installation, or $3,500 – $10,000 as a tub-to-shower conversion. The Sun City-specific cost driver is the slab: these homes are built on a concrete slab, so a true curbless entry means cutting into the slab to recess the drain and build the slope. It’s not a tile job on a wood subfloor. That slab work, plus the bench drain, is what separates a shower that drains from one that pools water onto your bathroom floor.
We run zip-wall barriers with negative air at every opening between the work zone and the living space, and we schedule heavy demolition in short two-to-three day windows, not open-ended tear-outs. Because Sun City summers run past 100°F, we protect the home’s cooling: any wall we open gets sealed at the end of the day, and AC returns get covered during dusty cuts. If the owner is living in the back bedroom, we plan the loudest work around their daily routine. Call (855) 600-3192 to talk through your specific situation.
Yes. Every Sun City project gets a line-item written scope with material allowances by brand, a fixed price for the contracted scope, and a draw schedule tied to inspection milestones, not calendar dates. You know exactly what a Cambria countertop allowance covers and what a Kohler shower system costs before we order anything. No change orders without a signed written change in scope. That’s how we’ve run jobs for Ruben Montoya’s Sun City clients since day one.
Almost every accessible remodel in Sun City uncovers two deferred items: galvanized supply lines that need re-piping, and original single-pane windows that leak heat all summer. Plan for window replacement at $4,500 – $15,000 and roof replacement at $8,000 – $20,000 as part of the same multi-year plan. We bid these together under one contract so you’re not juggling three different crews. Call (855) 600-3192 for a full-property scope walkthrough.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Sun City and the Menifee Valley since the company’s founding.