Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Construction in Fontana, CA | Stallion Contractors
We fabricate and install Cambria quartz countertops across Fontana, and our work here carries one distinct advantage: we know exactly what Cajon Pass wind and dust do to slab material before it ever reaches your kitchen. As an independent Cambria service provider, we handle everything from slab selection to templating to final install, with no authorization claims attached to the brand. Call (855) 600-3192 to schedule a free estimate, and we’ll walk you through the process from first measurement to final polish.
Why Fontana Residents Choose Us for Cambria Service
We run Cambria slabs through our shop every week, which means we know how Brittanicca machines differently from Torquay, how Ella takes an edge compared to Blackwood, and which seam placement holds up in Fontana’s post-WWII tract kitchens. Our relationship with Cambria flows through slab distribution, not a dealer agreement, so the pricing you get from us reflects what you’re actually buying: genuine Cambria stock, properly fabricated and installed.
Ruben Montoya grew up in Colton, not far from Pepper Avenue, where he learned early that the Inland Empire sun and soil punish cheap work faster than anything else. He picked up his construction foundation at San Bernardino Valley College, and over the past two decades he’s built the same standard into this company: no shortcuts on framing, no corners cut on concrete, and no slab swapped out to pad a margin. That’s why we handle Cambria the way we do, with the material treated as the investment it is.
Fontana homeowners call us because we carry Cambria quartz knowledge that generic remodelers don’t. We’re an independent fabricator, so we quote the slab, the edge profile, and the install as one scope, with the warranty backed by our workmanship, not a manufacturer’s sticker.
Styles & brands we work with
Common Cambria Construction Problems We Solve in Fontana
- Seam and lamination failures at inside corners: L-shaped runs in older 92335 tract kitchens sit on post-tension slab foundations that flex with heat cycling, which opens epoxy seams over time. We re-cut and re-bond failing corners using slab-lot color matching so the repair stays invisible, instead of patching a seam that will reopen in two summers.
- Edge chipping on ogee and bullnose profiles: When slabs are staged outside or cut without dust control near the pass corridor, wind-blown grit abrades unprotected edges before fabrication even starts. We cut indoors or under containment on Fontana jobs, and we re-polish any edge damage before installation.
- Etching and dull haze on honed finishes: Hard Inland Empire water and acidic cleaners sit on honed Cambria around sinks and cooktops, leaving a cloudy film that resists normal cleaning. We grind and re-hone affected areas to restore the original matte surface, and we’ll tell you which cleaners won’t cause a repeat.
- Dull, scratched faces from construction dust: During Fontana remodels where containment gets skipped, pass grit lands on unprotected slabs and works into the surface under foot traffic. We address this on installs we control, and we repair existing damage when homeowners call us in after another contractor left the slab exposed.
- Island overhang and support failures: On 92336 kitchen remodels where islands replace old peninsula layouts, poorly engineered overhangs flex and crack the quartz. We build substrate support to Cambria’s fabricator requirements so the stone carries the load, not the epoxy.
Service Areas Near Fontana
Stallion Contractors runs Cambria service throughout the Inland Empire, including Cambria service in Colton, where Ruben grew up, and Cambria service in Colton‘s neighboring communities. We also cover Cambria service in Bloomington, plus Mentone, San Antonio Heights, Loma Linda, and Redlands. If your Cambria project sits anywhere in or around Fontana, our Fontana service area reaches you.
Cambria Service in Fontana: What Local Conditions Mean for Your Equipment
Fontana sits at the mouth of the Cajon Pass, and that’s not a postcard detail when you’re installing quartz. Wind-blown grit off the pass is a routine site problem here, and it shows up fast on honed and matte Cambria finishes if slabs are staged outdoors or cut without wet methods. We learned this the hard way on a kitchen remodel off Sierra Avenue in the 92336 area, where we templated an island in Cambria Brittanicca for a homeowner replacing a 1990s laminate top. A dusty afternoon of pass wind left grit on the unprotected slab edges before fabrication. We re-polished the chipped edges, re-cut the seams indoors under wet methods, and set the island with a bookmatched waterfall edge the homeowner hadn’t thought possible on the tight L-layout. That’s the difference local experience makes: we don’t fight the conditions after they’ve damaged your material, we plan around them from the start.
See the difference
Before
After
Before
After
Before
AfterCambria Models & Products We Service in Fontana
We work with the full Cambria sales & service line, including Brittanicca and Brittanicca Gold, the marbled white and gold series most requested in Fontana kitchen remodels. Ella shows up often in 92335 and 92336 resale refreshes, where its soft white with subtle grey veining reads clean and current. Torquay handles high-traffic kitchen islands well, and Blackwood anchors bathroom vanities and bar tops. Cambria slabs must be sourced as genuine slab stock, no aftermarket equivalent, and we color-match the slab lot before layout so seams stay invisible across the run.
Cambria Service Pricing in Fontana
Here’s what Cambria fabrication and install typically runs in Fontana, based on linear footage, edge profile, and whether you need backsplash or island work:
| Service | Typical Range |
|---|---|
| Countertop Installation (Cambria quartz) | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Cabinet Installation | $4,000 – $13,000 |
Your total comes down to slab size, edge profile, and how much prep the existing cabinets need. Our free estimate includes a written line-item quote so you see exactly what the slab, edge work, and install cost, with no change orders down the line. Call (855) 600-3192 for an exact number on your Fontana project.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Cambria Construction in Fontana
Yes, it does. Wind-blown grit from the pass abrades unprotected slab edges and dusts the face, especially on honed and matte finishes. We cut indoors or under containment on Fontana jobs so the material never sits exposed to the wind before installation. Call (855) 600-3192 for an estimate on a Cambria project that accounts for local conditions from the start.
We can, and we do it by color-matching the slab lot before layout begins. Brittanicca varies in veining density from lot to lot, so matching requires pulling from the same or an adjacent production run, not just guessing from the pattern name. Our fabricators handle this as standard practice on every Fontana project, and we’ll show you the slab before we cut.
We re-epoxy and re-polish chips when the surrounding material is sound, and we re-cut and re-bond separated seams using the slab’s lot-matched color so the repair stays invisible. When a seam has failed because the substrate flexes, patching alone won’t hold, and we’ll tell you that honestly instead of selling a fix that reopens. Call (855) 600-3192 for a free repair assessment.
For most Fontana kitchens, yes. Cambria’s non-porous surface resists the hard water staining and acidic cleaner etching that granite and honed finishes absorb, and it doesn’t require the yearly sealing granite does. In 92336 remodels where islands become the main prep surface, that durability matters more than the price difference. We’ll show you Cambria and granite side by side so you can decide based on your kitchen’s actual use, not a showroom pitch.
Hard Inland Empire water and acidic bathroom cleaners sit on honed Cambria finishes and etch the surface, leaving a hazy film that normal cleaning can’t remove. We grind and re-hone the affected area to restore the original matte finish, and we’ll recommend cleaners that won’t cause the problem to return. For vanities in Fontana bathrooms, this repair usually runs $250 – $700 depending on the affected area. Call (855) 600-3192 for an exact quote.
Book Your Cambria Service in Fontana Today
From your first measurement to the final polish, we handle your Cambria project as one scope, one team, one outcome. Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing. Call (855) 600-3192 to schedule your free estimate, and we’ll bring slab options, edge profiles, and a line-item quote to your Fontana home.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Fontana and the surrounding Inland Empire.