Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Banning, CA | Stallion Contractors
We provide independent Kohler construction service across Banning, from full bathroom remodels and walk-in shower installations to tile work and fixture replacement, and we also offer Kohler service in Cabazon. We don’t carry a manufacturer authorization, and we’re direct about that. What we do carry is years of hands-on time inside Kohler’s plumbing systems, right here in a city where wind and hard water punish fixtures faster than most places in Southern California. Call (855) 600-3192 to schedule a free estimate.

Stallion Contractors works as your full-scope general contractor. That means when a Kohler shower valve needs rebuilding inside a bathroom that also needs new cement board, waterproofing, tile, and a properly vented plumbing wall, one crew handles all of it under one contract. For Banning homeowners, you get Kohler sales & service expertise paired with a contractor that manages every trade.
Why Banning Residents Choose Us for Kohler Service
Kohler makes some of the best plumbing fixtures you can put in a home. We’d rather say that plainly than pretend the brand needs a sales pitch. But even the best-built faucet or toilet fails when Banning’s conditions get a vote. Colorado River water in this part of the Pass runs hard, and that mineral load settles into ceramic disc cartridges, fill valves, and finish coatings. Add the heat that builds up inside uninsulated walls and manufactured-home tanks, and you get failure patterns most contractors in coastal cities never see.
Ruben Montoya, our owner, learned construction through the hands-on programs at San Bernardino Valley College, then spent over two decades on Inland Empire job sites where the sun and soil don’t forgive shortcuts. His father was a finish carpenter, and that shows in how we treat the final ten percent of a Kohler install: clean valve access, straight trim alignment, caulk joints that don’t crack open in the first Santa Ana season. We also stay independent on purpose. No authorization means we source the right part for the job, not the part a manufacturer program tells us to push.
Every Kohler job we take in Banning gets OEM-compatible parts where it matters: ceramic cartridges, Rite-Temp pressure-balance valve internals, fill valves, and trim. When a Memoirs or Devonshire piece is discontinued and OEM isn’t available, we tell you that up front and use quality aftermarket only with your sign-off. We serve all of Banning service area, including 92220, from the flat historic core near downtown to the Sun Lakes and Banning Ranch manufactured-home communities.
Styles & brands we work with







Common Kohler Construction Problems We Solve in Banning
We’ve stripped down enough Kohler fixtures in this city to know exactly where they give up. Here’s what we see most:
- Cartridge seizure and weeping in Forté and Purist faucets. Banning’s water carries heavy mineral content from the Colorado River. That scale builds up inside the ceramic disc cartridges until the handle turns stiff, then the spout drips. We replace the cartridge with a genuine Kohler OEM unit and clean the valve body so the new one seats clean.
- Fill valve failure in Villager and Wellworth toilets in Sun Lakes manufactured homes. Those tanks sit in uninsulated spaces where the Pass heat cycles them daily. Rubber internals cook and crack, and the toilet runs phantom cycles all night. Our field crews reset these with OEM-valved Kohler suites and add proper venting where the original install skipped it.
- Enamel chipping and rust at drain rings on cast-iron Kohler sinks. Banning’s 1950s-70s homes near downtown still hold original Kohler cast-iron kitchen and bath sinks. We frequently see rust creeping from the drain ring, especially after a remodel exposes a formerly hidden rim. We’ll tell you honestly if the enamel can be salvaged or if the casting is compromised and replacement makes more sense.
- Finish pitting on brushed and vibrant Kohler finishes. Hard water plus sun-baked bathroom windows in Banning accelerates pitting and flaking on faucet and trim finishes. Once the finish goes, polishing won’t bring it back. We quote replacement trim when that happens.
- Caulk and sealant failure around tub surrounds and shower pans. The UV and dust loading through the Pass breaks down standard caulk faster than manufacturers expect. We roll with sealants rated for high-desert temperature swings and re-caulk every penetration when we set tile or install a shower pan.
Kohler Service in Banning: What Local Conditions Mean for Your Equipment
Banning sits right at the mouth of the San Gorgonio Pass, and that one geographic fact drives more Kohler-related construction decisions here than any product catalog ever will. When Santa Ana gusts rip through in fall and winter, they routinely hit 50 to 80 mph as they funnel between the San Bernardino Mountains and the Coachella Valley. The west-facing edges of town take it hardest, and anything not anchored properly goes first: patio covers, fence panels, roof edges, and even vent penetrations on bathroom walls. A shower remodel isn’t just about tile and fixtures in Banning. It’s about making sure the exterior wall behind that Kohler shower valve is sealed and fastened to hold through wind-driven rain and dust, not just a light drizzle. We over-build windward exposures as standard practice on any full bathroom remodel we run in this city. Coastal and inland-valley contractors working the same job never have to make that calculation. Homeowners near the downtown historic core and out through the 92220 corridor should ask any contractor they interview how they handle wind uplift on windward bathroom and exterior walls. If they pause, that’s your answer. In Banning, Kohler fixtures last longer when the wall around them is built for the Pass.
Kohler Models & Products We Service in Banning
We service most Kohler product lines installed in Banning homes, including the Memoirs and Devonshire toilet suites original to many mid-century builds near downtown, the Forté and Purist widespread faucet lines, Rite-Temp and similar pressure-balance shower and tub valves, and the Villager and Wellworth two-piece toilets common in Sun Lakes manufactured housing. Our parts approach is simple: we use genuine Kohler OEM cartridges, fill valves, and trim whenever the part is still produced. For discontinued Memoirs or Devonshire pieces where Kohler no longer supplies the part, we discuss aftermarket options honestly before any work starts. We keep common Kohler valve rebuild parts on hand for faster Banning turnaround, especially during the fall and winter wind season when water intrusion and fixture failures spike, and we handle Kohler in Calimesa as well.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Banning
Kohler-specific construction work in Banning lands in predictable ranges depending on scope. A full bathroom remodel runs $9,000 to $28,000 depending on layout changes, waterproofing, and fixture count. Walk-in shower installation typically falls between $4,500 and $12,000. Tub-to-shower conversions run $3,500 to $10,000. Vanity installation runs $800 to $3,000, and that’s where many Banning homeowners start when they want Kohler quality without a full gut.

| Service | Price Range |
|---|---|
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What pushes a Banning Kohler job toward the higher end: windward exterior wall reinforcement, hard-water damage inside the valve body, rotted framing behind old shower surrounds, and the extra sealing work the Pass demands. Our free estimates are written line-items so you can see exactly where the money goes. Call (855) 600-3192 for a quote on your specific project.
Serving Banning, CA — Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Banning
No. Stallion Contractors is an independent general contractor serving Banning. We source our own OEM Kohler parts directly through our supplier network and carry no manufacturer authorization. What that means for you: we pick the right part for the job rather than the one a program incentivizes, and we’ll tell you straight when a fixture is worth repairing versus replacing.
Yes, if the wall assembly behind it is built for the Pass. We over-build windward exterior walls on full bathroom remodels in Banning, adding fastening and sealing that a standard coastal build never accounts for, and we bring the same rigor to Kohler service in Valle Vista. Your Kohler fixtures themselves aren’t the weak point; the wall they mount to is. We address both. Call (855) 600-3192 for an exact scope on your home’s windward exposure.
We use genuine Kohler OEM cartridges, fill valves, and trim whenever the part is still in production. For discontinued lines like older Memoirs or Devonshire pieces, we source quality aftermarket only with your sign-off, and we’ll tell you before any work starts that OEM isn’t available.
Most full bathroom remodels run two to four weeks depending on layout changes and waterproofing scope. Walk-in shower installations typically take one to two weeks. Windy season doesn’t slow us down much on interior work, but exterior penetrations get scheduled around weather windows so sealant cures properly. Call (855) 600-3192 and we’ll give you a realistic timeline for your project.
Forté and Purist faucets, Memoirs and Devonshire toilet suites, Rite-Temp pressure-balance valves, and Villager and Wellworth two-piece toilets in the Sun Lakes manufactured homes. We see all of these regularly across 92220. If your Kohler fixture isn’t listed here, call (855) 600-3192; chances are we’ve worked on it in Banning before.
Service Areas Near Banning
We run Kohler construction service across the Pass and into the surrounding Inland Empire. Nearby coverage includes Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, and Redlands. We also serve Kohler service in Mead Valley and Kohler service in Lakeview for homeowners just over the hill.
Book Your Kohler Service in Banning Today
We’re ready to walk your Banning property, check the windward exposure, test the water condition at the fixture, and give you a written line-item estimate. Good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing. Call (855) 600-3192 to schedule your free estimate.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Banning and the Inland Empire.