Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in Upland, CA | Stallion Contractors
We provide independent Delta service across Upland, from downtown bungalows to the 91784 foothill zone, and also handle Delta service in Claremont. The thing that makes our Delta work different here is simple: we match the fix to the rough-in behind your wall, not to whatever trim kit happens to be on a showroom shelf. If you’re fighting a stiff Delta shower handle or a faucet that won’t shut off, call us at (855) 600-3192. We’ll tell you what’s actually going on before you spend a dollar.
Why Upland Residents Choose Us for Delta Service
Delta is one of the most spec’d faucet and fixture brands in Upland’s older bungalow and foothill remodels, so we’ve spent years pulling Delta cartridges, valve bodies, and trim kits out of 1920s through 1990s plumbing. That’s not a line. It’s what the work looks like here. Because we’re independent, we fit the Delta model that actually matches your valve and rough-in depth rather than whatever a dealer program pushes.
Ruben Montoya, our owner, grew up in Colton and learned construction at San Bernardino Valley College, where the hands-on programs put him on job sites before he ever had a business card. He still pays more attention to the final ten percent of a job than most contractors pay to the first ninety. That matters when you’re trying to get a 1960s Delta valve to hold temperature the way it should.
Styles & brands we work with
Common Delta Construction Problems We Solve in Upland
- Monitor 1300/1400 Series cartridge scale and hard-water seizing. Inland Upland water leaves the balance spool sticking, so the handle goes stiff and shower temperature drifts mid-rinse. We replace the cartridge with genuine Delta OEM and correct the pressure behind it.
- Deck-mount kitchen faucet bases corroding and pitting. We see this constantly under mid-century bungalow windows, where a slow drip has soaked the counter for years before anyone notices. The faucet’s done, and usually the countertop around it needs attention too.
- Older Monitor valve seats and seat-springs wearing out. The shower won’t fully shut off. This shows up a lot in downtown Upland homes with galvanized supply and pressure swings. Rebuilding the valve is usually the right call if the rough-in is sound.
- Exterior hose bibbs and foothill-zone fixtures failing from sun and wind. Dry Santa Ana heat bakes trim, cracks aerators, and seasonal stucco movement loosens everything mounted to an exterior wall. Foothill homes in 91784 get this harder than flat lots downtown.
- Handles forced on seized cartridges until the balance spool cracks. By the time we arrive, someone has usually been wrenching on that handle for months. We see the same pattern in 1950s ranch homes and 1980s tract builds alike.
Delta Service in Upland: What Local Conditions Mean for Your Equipment
Upland splits sharply at the 210. Downtown’s 1920s to 1960s bungalows run Delta Monitor valves on galvanized or early copper supply, while 91784 foothill homes from the 1970s to 1990s were built with 1/2-inch pressure-balanced Delta rough-ins. So the same Delta trim call means two completely different valve strategies a few miles apart. That’s the thing nobody tells you until you’ve opened the wall. On a 1950s ranch home off Euclid Avenue near downtown, our tech opened a wall to find a seized Delta Monitor 1400 cartridge on galvanized supply. The handle had been forced so long the balance spool cracked. We rebuilt the valve with an OEM Delta cartridge and new trim, then corrected the pressure behind it. The shower now holds temperature the way the original rough-in was designed to.
Delta Models & Products We Service in Upland
We work on Delta Monitor 13/14 Series tub-and-shower valves with single-handle trim, Delta Foundations and Classic single-handle kitchen faucets, Delta Lahara and Addison widespread bathroom faucet collections, and Delta pull-down kitchen faucets including Trinsic and Essa-style arcs. We use genuine Delta OEM cartridges and valve trim on Monitor and single-handle fixtures because the balance spool tolerances matter. We use quality aftermarket seals only where Delta no longer stocks the assembly. If the valve body behind the wall is sound, we rebuild it. If it’s a 1960s rough-in with corroded ports, we tell you straight that re-trimming it just moves the failure. For Upland homeowners, our Delta sales & service coverage includes full fixture swaps, valve rebuilds, and remodel-scope fixture installation.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in Upland
Fixture work in Upland usually falls inside the same ranges whether you’re downtown or up in 91784, but the scope changes depending on what’s behind the wall. Here’s how common Delta-related jobs price out:
| Service | Typical Upland Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives cost is rough-in access and what we find once the trim comes off. A straightforward cartridge swap is fast. A 1960s valve with corroded ports takes longer, and we’ll walk you through that before cutting anything. Estimates are free. Call (855) 600-3192 and we’ll put a real number on your Delta job in Upland.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Delta Construction in Upland
Yes, that’s almost always the Monitor cartridge seizing from hard water scale. Upland’s water is hard enough that the balance spool sticks, and the handle gets forced until the temperature control stops working. Call (855) 600-3192 and we’ll confirm it with a quick look behind the trim.
It often does. Foothill homes from the 1970s to 1990s typically have 1/2-inch pressure-balanced Delta rough-ins, while downtown bungalows run older Monitor valves on galvanized supply. We identify the rough-in before ordering anything.
Only if the valve body behind the wall is sound. If the rough-in is a 1960s unit with corroded ports, re-trimming it just delays the same failure. We’ll tell you which situation you have before we quote anything.
Delta’s Monitor pressure-balanced valves hold up well when the cartridge is maintained, and pull-down kitchen faucets with sealed base gaskets resist the sun-baked deterioration we see on older deck-mount fixtures. Exterior hose bibbs benefit from simple covers during Santa Ana season.
Genuine Delta OEM cartridges and valve trim on Monitor and single-handle fixtures. Aftermarket seals only where Delta no longer stocks the assembly. The balance spool tolerances are too tight for knock-off parts. Call (855) 600-3192 for an exact quote on your Delta repair or remodel.
Service Areas Near Upland
We cover Upland and the surrounding Inland Empire communities including Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, and Redlands. If you’re in one of those areas, our Upland service area coverage applies. For Delta work specifically in the foothills, see our Delta service in Sunnyslope page. East of here, we also run Delta service in Yucaipa.
Book Your Delta Service in Upland Today
If your Delta fixture is acting up, don’t force the handle. Call (855) 600-3192 to schedule a free estimate. We service all three Upland ZIP codes: 91784, 91785, and 91786.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Upland and the Inland Empire.