Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in March Air Force Base, CA | Stallion Contractors
We provide independent CWS cabinet installation, refacing, and full kitchen remodeling across March Air Force Base, and we’re not an authorized CWS dealer or manufacturer affiliate. What makes our CWS work different here is the reality of the housing stock: mid-century military wood-frame and CMU buildings that fight back when you try to retrofit modern cabinet packages. Ruben Montoya leads our team, and he’s spent more than two decades learning what base-era construction does to finish materials in this heat. Call (855) 600-3192 for a free estimate.

If you own a CWS York Sink Base, a Lancaster Shaker kitchen, or a Brighton bath vanity in March Air Force Base, you already know the cabinets hold up. The install is usually where things fall apart. We handle both, and we’re set up for the specific conditions this base and its surrounding housing throw at cabinetry.
Why March Air Force Base Residents Choose Us for CWS Service
Most cabinet crews in the Inland Empire never touch a house built to government spec. March Air Force Base is different. Much of the residential stock near the base went up as utilitarian military housing: irregular stud spacing, old blocking that was never sized for cabinet loads, and supply lines that predate modern plumbing codes. Those buildings reward experience and punish guesswork. We’ve worked CWS cabinetry into enough of these homes to know exactly where the problem spots are before we open a wall, and we bring the same expertise to CWS repair in Perris.
Ruben grew up in Colton, not far from Pepper Avenue, where half the homes on his block were built by tradesmen who understood Inland Empire soil and sun. His father was a finish carpenter, and that’s part of why our crews still sweat the final ten percent of a CWS installation: the reveal gaps, the door alignment after the boxes settle, the soft-close action on drawer slides installed in a house that’s shifted for sixty years. Good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing.
We carry OEM-matched CWS doors and drawer fronts where they’re still supported, and we keep a rotating local stock of dimensionally equivalent hinges, slides, and shelf pins for lines that have been discontinued or are backordered. When your CWS boxes are structurally sound, we reface and re-hinge rather than pushing a full tear-out. When the carcass is water-damaged or out of square, we tell you straight and recommend replacement. That’s the whole job.
Styles & brands we work with







Common CWS Construction Problems We Solve in March Air Force Base
- Delaminated doors and drawer fronts from endless dry-heat cycling. CWS composite-box cabinets hold up reasonably well, but several summers of 100-plus degree days and single-digit humidity will eventually check or separate finish layers on door faces and edges. We see this most on kitchens with direct afternoon exposure, and we reface with OEM-matched fronts where the line is still available.
- Sagging or racking wall cabinets in older wood-frame military housing. Original blocking behind base-era drywall was often inadequate or missing entirely. Over time, upper CWS cabinets pull loose from irregular studs and start to tilt. We open the wall, re-block to current cabinet-load spec, and reset the boxes plumb before anything goes back up.
- Swollen, crumbled particleboard around sink bases. The aging government-spec supply lines in March Air Force Base homes leak slowly, and CWS sink bases quietly absorb moisture until the substrate fails. By the time a homeowner notices, the box is often beyond patching. We replace the cabinet body and correct the plumbing rough-in before the new unit goes in.
- Hinge and slide failures accelerated by heat and dust intrusion. The airfield side of March ARB gets real gusts, and buildings with poor envelope sealing pull in fine dust that grinds through lubricant and wears hinge cups and drawer slides prematurely. We swap in quality aftermarket hardware rated for the abuse, not just whatever the original spec called for.
- Out-of-square openings after decades of slab movement. The soil around March Air Force Base is rough on footings. A cabinet box that measured square at install often sits in an opening that’s drifted a quarter inch over fifty years. We scribe and shim rather than force-fit, which is the difference between doors that close and doors that bind every time the house settles another fraction.
CWS Service in March Air Force Base: What Local Conditions Mean for Your Equipment
March Air Force Base is a former active-duty installation turned joint reserve base and logistics hub. That past shapes every remodel here in ways that don’t apply to Riverside or CWS in Moreno Valley. FAA airfield clear-zone height restrictions near the runway can cap vertical work on additions and even some kitchen-level structural changes. Old utility easements cross residential parcels, and abandoned fuel lines from the base’s operational days still show up on site maps. If you’re gutting a kitchen in base-adjacent housing, the trenching and siting constraints are real, and they have to be cleared before you close a wall. We work with mapped easement data on every CWS job in March Air Force Base, because the last thing anyone needs is a beautiful new kitchen sitting on a plumbing rough-in that violates a recorded corridor. This is the reality of building here: contractor knowledge beats brute force every time.
On a CWS Lancaster Shaker kitchen in the base-adjacent housing off Cactus Avenue, we found wall cabinets pulled loose from irregular studs and a sink base swollen past salvage from a slow supply-line leak. We re-blocked the wall to cabinet-load spec, reset the boxes plumb, replaced the water-damaged sink base and delaminated doors with OEM-matched fronts, and set a new quartz top. Before we closed that wall, we pulled the plumbing rough-in clear of the mapped base easement. That’s what CWS service in March Air Force Base actually looks like: it’s not just cabinet work, it’s knowing what’s behind the drywall and under the slab.
CWS Models & Products We Service in March Air Force Base
We install, reface, and repair CWS cabinet lines that show up most often in March Air Force Base kitchens and baths. The CWS York Sink Base and Wall Cabinet series is common in older cookhouse-style galley layouts; the CWS Lancaster Shaker line dominates a lot of mid-2000s remodels around the Inland Empire. We also handle CWS Brighton Series bath vanities and CWS Hartford pantry and tall utility cabinets. When boxes are sound, we push refacing and hardware replacement. When carcasses have gone soft or out of square, we recommend full replacement. OEM doors and drawers get matched when CWS still supports the line; when parts are discontinued or backordered, we use dimensionally equivalent aftermarket hinges, slides, and shelf pins. We stock the common CWS hardware profiles locally so March Air Force Base turnaround doesn’t sit on a parts order.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in March Air Force Base
March Air Force Base CWS work prices out like the rest of the Inland Empire, with a few local variables. Homes with known easement constraints or airfield-adjacent siting issues may require plan review or utility marking that takes extra time. The scope below reflects realistic ranges for our CWS cabinet, countertop, and kitchen work in this market.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Backsplash Installation | $800 – $2,500 |
Every estimate includes a written line-item scope, measured on-site, with the CWS parts specified up front, not guessed at. Call (855) 600-3192 for an exact quote, estimates are free and we’ll walk the site before we put any number in front of you.
Serving March Air Force Base, CA — Our Local Coverage Area
We’re based in the March Air Force Base area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in March Air Force Base
What does a CWS kitchen update cost around March Air Force Base? A CWS kitchen reface or cabinet replacement in March Air Force Base typically runs $14,000 to $45,000 for a full remodel, while cabinet-only installation lands between $4,000 and $13,000. Countertop work adds $2,000 to $6,500 depending on material and square footage. Call (855) 600-3192 for an exact, measured quote.
Are you an authorized CWS dealer or installer? No. We’re our General Contractor in March Air Force Base, an independent general contractor that installs, refaces, and repairs CWS cabinetry. Our credibility comes from the volume of CWS work we’ve done across March Air Force Base and the Inland Empire, not from a badge or endorsement. We match OEM parts where CWS still supports the line and use quality aftermarket equivalents when parts are discontinued.
How long does CWS cabinet service take in March Air Force Base? A straightforward cabinet install typically runs two to four working days once materials are on site. Refacing and hardware replacement often finish faster. Kitchen gut-and-replace jobs with countertops and plumbing tie-ins run longer, and March ARB jobs with easement clearance or airfield-adjacent siting reviews can add a few days on the front end for marking and plan checks. We give you a realistic schedule before work starts, not a sales answer.
Which CWS product lines do you cover? We work on the CWS York Sink Base and Wall Cabinet series, the CWS Lancaster Shaker-style kitchen line, CWS Brighton Series bath vanities, and CWS Hartford pantry and tall utility cabinets. If you have a CWS line not listed here, call us, we’ll tell you honestly whether a reface is worth it or replacement makes more sense for your March Air Force Base home.
Will the price change once work begins? The only changes we make mid-job are ones you approve in writing first. If we open a wall in a March Air Force Base house and find rotted framing or an unmapped obstruction, we stop, show you what we found, and give you a change order before any additional work happens. You won’t get a finish bill that surprises you.
Service Areas Near March Air Force Base
Our crews cover March Air Force Base and the surrounding Inland Empire communities. We regularly work Colton, Bloomington, Loma Linda, Redlands, Mentone, and CWS in Good Hope. If you’re in one of those areas and need CWS cabinet work, call us, same team, same standard.
For more on Stallion’s broader CWS work, see our CWS sales & service page. And for coverage details across the region, visit our March Air Force Base service area page, CWS service in Woodcrest, and CWS service in Los Serranos.
Book Your CWS Service in March Air Force Base Today
If your CWS cabinets are delaminating, sagging, or sitting on a swollen sink base, don’t wait for the damage to spread. Call (855) 600-3192 to schedule a free estimate. We’ll measure, quote, and get your March Air Force Base kitchen or bath back to work.
Written by Ruben Montoya, Owner at Stallion Contractors, serving March Air Force Base since the early base-conversion rehab years. Stallion Contractors is an independent contractor, not authorized, sponsored, or endorsed by CWS.