Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Highgrove, CA | Stallion Contractors
We provide independent Dvele construction, repair, and finish-out service across Highgrove, and here’s the one thing that separates our work from every other crew you might call: we’ve handled enough Dvele panelized and modular installs across the Inland Empire to know exactly where these homes fail under Highgrove-specific conditions. We’re not manufacturer-affiliated, not authorized, and not endorsed by Dvele. We’re a full-scope general contractor that knows Dvele’s panel tolerances, roof-to-wall junction weak points, and county permitting headaches in Highgrove better than most. If you need a Dvele addition, repair, or remodel, call (855) 600-3192 for a free estimate.
Why Highgrove Residents Choose Us for Dvele Service
Dvele builds a tight panelized home. That’s the appeal. But tight envelopes demand precision on site, and precision is where we’ve earned our reputation across Highgrove’s rural parcels. Ruben Montoya, our owner, grew up in Colton and learned construction at San Bernardino Valley College, on job sites before he had a business card. His father was a finish carpenter, which is why we still pay more attention to the final ten percent of a Dvele job than most contractors pay to the first ninety.
What does that mean for your Dvele home in Highgrove? Panel seam gaskets seated correctly, flashing lapped so wind-driven rain can’t find purchase, foundation detailing matched to the expansive clay that runs under this part of Riverside County. We keep OEM-equivalent Dvele connectors and gaskets on hand so wait time doesn’t stretch into weeks. Our Dvele sales & service work is built on honesty about what to repair and what to replace. Sometimes that means a targeted flashing retrofit instead of a panel swap. We’ll tell you when that’s the right call.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Highgrove
Dvele homes are well engineered, but Highgrove’s climate and county rules push every system harder than a coastal or city lot would. Here are the failure modes we see and fix here:
- Panel seam separation at roof-to-wall junctions. Santa Ana wind events drive rain sideways into the seam where Dvele’s panelized roof meets the wall. The original gasket dries out or shifts, water intrudes, and you get a ceiling stain. We remove the compromised flashing, install an OEM-equivalent gasket with kick-out flashing, and seal the seam so it survives the next wind season.
- Foundation settling and door or window racking. Highgrove sits on expansive clay that swells when wet and shrinks when dry. Dvele modular units are heavy, and that weight focused on a settling slab racks windows and doors. We level with pier or slab correction, then re-square the openings before trim work starts so the fix actually holds.
- Exterior finish fade and chalking on south- and west-facing walls. Inland sun is unforgiving. Factory-applied Dvele finishes chalk and fade faster here than anywhere west of the pass. We refinish with materials that meet or exceed Dvele’s spec, matched to the original color where the fade hasn’t gone too far.
- HVAC chase condensation and duct leakage. Dvele envelopes are tight, which is great for energy, but if the chase wasn’t sealed correctly during the original site assembly, condensation builds and ducts bleed air. We open, reseal, and re-insulate the chase, then test the system so the home actually hits the efficiency numbers Dvele advertises.
- Site-assembly tolerance drift from lot-to-lot variation. Highgrove’s older lots weren’t graded with Dvele panel tolerances in mind. We’ve seen panel connections strained where slabs meet county-mandated drainage swales. We correct with shimming, re-flashing, or foundation extension before drywall ever goes back up.
Dvele Service in Highgrove: What Local Conditions Mean for Your Equipment
Here’s what nobody tells you until you’re already in permitting: Highgrove is unincorporated Riverside County, so every Dvele project here clears two separate county reviews. Riverside County Building & Safety handles the structure, and then county Environmental Health signs off on well and septic. That two-track review adds weeks of coordination, and it’s unavoidable on Highgrove’s rural parcels where city water and sewer lines simply never arrived. A Dvele addition on a private well means the county wants to see existing septic capacity before foundation work starts. A home addition that touches plumbing means a perc test or a well flow report before a permit gets issued. Crews that only work in Riverside or San Bernardino city limits never see this. We do, because we’ve built in Highgrove, and we build the county’s requirements into the project schedule from the first walkthrough. Off Center Street in Highgrove, our crew traced a persistent ceiling stain on a Dvele Dwell Series home to a failed panel seam gasket at the roof-to-wall junction, a common weak point after Santa Ana wind events. We removed the compromised flashing, installed a new OEM-equivalent gasket and kick-out flashing, and sealed the seam. Stopped the leak without replacing any panels. The homeowner passed their county re-inspection on the first try.
Dvele Models & Products We Service in Highgrove
Our Dvele work covers the model lines we see most in Highgrove and the surrounding unincorporated communities, from Grand Terrace Dvele service to local projects: the Dvele Dwell Series, Dvele Element Series, Dvele Vista Series, and Dvele custom modular packages. We source OEM-equivalent panel connectors, gaskets, and flashing kits from the original fabricator whenever available so your warranty stays intact and the fit matches original tolerances. For non-structural trim and finishes, we use high-quality aftermarket components that meet or exceed Dvele’s specifications. We keep common Dvele gasket profiles, flashing kits, and panel fasteners stocked locally so a Highgrove repair doesn’t stall waiting on a factory shipment from out of state.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Highgrove
What you’ll pay depends on the scope, but here are the ranges we quote across Highgrove for the Dvele work we handle. These are full-project ranges, not hourly rates, so they reflect what a finished job actually costs here.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Home Addition | $45,000 – $130,000 |
Dvele-specific work costs more than stick-built in some areas because the panel tolerances are tighter, and cheaper in others because the assembly is faster. A seam repair on a Dvele roof might run $400 to $1,800. A panelized roof replacement in Highgrove runs $8,000 to $20,000 depending on the home’s series and wall height. Every estimate we give is free and line-itemed, so you see exactly where the money goes before you sign anything. Call (855) 600-3192 and we’ll walk the property, pull the county records if needed, and get you a number that won’t change once work starts.
Serving Highgrove, CA — Our Local Coverage Area
We’re based in the Highgrove area and know this community well, with Dvele service in Loma Linda nearby as well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Highgrove
We perform repairs and finish-outs on Dvele homes as an independent contractor, not as a manufacturer-authorized warranty agent. That means we can fix the problem and speak honestly about whether a Dvele warranty claim is worth pursuing alongside the repair. If the fix is something we can handle with OEM-equivalent parts, we do it without making you wade through factory claim paperwork first. Call (855) 600-3192 and we’ll help you sort out what’s covered and what’s faster to just fix.
Every Dvele home addition in Highgrove needs a Riverside County Building & Safety permit, and if the addition touches plumbing or adds a bedroom, the county’s Environmental Health division gets involved for septic and well capacity review. That’s the two-track approval we handle for you. We pull the permits, coordinate the county inspections, and don’t start framing until the paperwork clears. That’s how our Highgrove projects pass re-inspection the first time.
We start at the seam, not the shingle. Dvele panelized roofs almost always leak at the panel-to-wall junction or the seam between panels, so we inspect those connections first before tearing into anything. Most Highgrove roof repairs we do are gasket and flashing replacements at those seams, plus resealing the joint so wind-driven rain from the next Santa Ana event can’t find the same entry point. Call (855) 600-3192 for a roof inspection and quote; estimates are free.
Yes. Highgrove sits on expansive clay that moves more than the sandy loam you’ll find nearer the Santa Ana River. Dvele’s modular units are heavier per square foot than stick-built, so that weight on moving clay produces door and window racking faster than on a stable slab. We correct with slab repair and pier reinforcement, and unlike crews handling Dvele repair in Rubidoux on more stable ground, we always check the foundation before any Dvele interior remodel so the finish work isn’t undone by settlement six months later.
A Dvele kitchen remodel in Highgrove usually runs six to ten weeks from permit to final inspection, with the two county tracks adding two to three weeks at the front end if plumbing moves or the home is on well and septic. That’s longer than a city-only remodel, but the schedule accounts for it so you’re not surprised. Call (855) 600-3192 and we’ll give you a timeline that matches your specific home’s permitting path.
Service Areas Near Highgrove
Our Dvele work extends beyond Highgrove to the surrounding Inland Empire communities where panelized and modular homes are showing up on older lots. We provide Dvele service in Upland, Dvele service in Sunnyslope, and Dvele construction across Colton, Bloomington, Loma Linda, Redlands, and Mentone. If your Dvele home sits on a county parcel anywhere along the I-215 corridor, we’re the crew that knows the local soil and permitting path. For the full scope of our work across the region, see our Highgrove service area page.
Book Your Dvele Service in Highgrove Today
Good work doesn’t need a sales pitch; it needs the right materials and someone who knows what they’re doing. We keep the materials in stock, and we know Highgrove’s Dvele homes from the foundation to the roofline. Call (855) 600-3192 to schedule your free estimate. We’ll walk the property, look at the panels, and give you a number that holds.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Highgrove and the Inland Empire.