Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Moreno Valley, CA | Stallion Contractors
We build, finish, and repair Dvele panelized homes across Moreno Valley as an independent contractor. We are not authorized or endorsed by Dvele, and that matters more than most homeowners realize. The factory drawings do not account for what a Rancho Belago afternoon sun does to a west-facing panel seam, so our crews make sequencing and weatherproofing calls based on the actual site. If you own a Dvele home in Moreno Valley or are planning one, call (855) 600-3192 and we will go over your project against the exact lot conditions we have seen in your tract.
Why Moreno Valley Residents Choose Us for Dvele Service
Dvele builds a specific kind of house: insulated, panelized wall and roof assemblies that arrive on a truck and go up fast. The speed is real. What is also real is that the assembly has to hold as a whole, and the weak points are the panel joints, the roof-to-wall transitions, and the way the factory sealant ages under Inland Empire sun. We have spent years working on Dvele sales & service projects across the east side, and we know what these houses need after five, ten, and fifteen summers in Moreno Valley.
Ruben Montoya, our owner, grew up in Colton where Dvele service in Colton and nearby areas shaped how half the houses on his block were built by tradesmen who understood the Inland Empire soil and sun better than anyone. He was on job sites before he ever had a business card, and his father was a finish carpenter, so the final ten percent of a job gets more attention here than most contractors give the first ninety. That matters when the difference is a panel joint that holds through the next Santa Ana season, or one that lets water in behind a ceiling.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Moreno Valley
- Panel joint separation on west- and south-facing walls. The same afternoon sun that fades paint and cracks stucco in Moreno Valley also bakes Dvele panel seams. The factory sealant hardens, the panel skin expands, and the joint starts to open. We see it first on the exact elevations that catch the March through September sun cycle.
- Wind-driven water intrusion at panel and roof transitions. Santa Ana winds in March through May push rain sideways. Once the sealant at a panel-to-panel or roof-to-wall transition has UV-hardened, that sideways rain finds its way past. It often shows up as a ceiling stain months later, well after the storm is forgotten.
- Roof panel edge lift and fastener back-out. Dvele roof panels expand and contract through the inland thermal swing between 100°F days and near-freezing winter mornings in the east valley. The cycle loosens fasteners and lifts panel edges, particularly on low-slope sections.
- Racked door openings and panel-joint stress on older slabs. In the older 92553 corridor near the 60 Freeway, minor slab movement shows up differently on a Dvele than on a stick-built house. Instead of cosmetic drywall cracks, you get racked door frames and stress at the panel joints.
- HOA-triggered paint and repair approvals. Moreno Valley’s east-side tracts have architectural committees that review exterior changes, and HOA paint palettes mean even a panel-seam repair has to color-match approved shades. We document the repair for your HOA file so the committee sees it was done correctly.
Dvele Service in Moreno Valley: What Local Conditions Mean for Your Equipment
Moreno Valley’s post-1980s master-planned subdivisions, like Sunnymead Ranch, Towngate, and Rancho Belago, are now hitting the 25 to 40 year mark. That is the age when HOA-regulated exterior upgrades start coming due: stucco repair, tile re-roofs, patio cover rebuilds, and for Dvele owners, panel re-sealing and roof panel re-flashing. But here is what most factory warranties and generic contractor pages will not tell you. The east-side Inland Empire heat and wind cycle stresses tract-built stucco and tile assemblies in a way that does not match what a Dvele panelized assembly experiences in, say, coastal San Diego or even Riverside. The daily thermal swing in Moreno Valley is wider, the afternoon sun sits harder on south- and west-facing panels, and the Santa Ana season comes earlier and stronger through the San Gorgonio Pass than it does in Perris or western Riverside. That means a Dvele panel joint in Rancho Belago ages differently than the same joint in Pomona, and repair decisions should be made accordingly. We pull and re-set panel edges when the structural skin has moved, and we re-seal when the joint is still sound. It is a judgment call that comes from seeing hundreds of these assemblies across the valley, not from a factory service bulletin.
Dvele Models & Products We Service in Moreno Valley
We work on the Dvele Core series, the panelized single-family line most often spec’d for infill lots across Moreno Valley service area. We also handle Dvele Signature, the larger customizable plans with upgraded envelope and finish packages, and Dvele ADU panel kits for backyard infill. Where the assembly is proprietary, we use Dvele factory-sourced panels, connectors, sealants, and gaskets. Where the factory part is a commodity, like flashing or weather barrier, we use spec-matched quality aftermarket material. Mismatched sealant chemistry is the fastest way to void a panel joint, so we do not substitute at the seams. If a joint or roof panel is sound, we re-seal and re-flash. We only recommend panel replacement when the structural skin or connection is compromised.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Moreno Valley
What you pay depends on what the assembly is doing. A roof panel edge that has lifted after a Santa Ana season might be a re-flash at the low end, or a re-set if the fasteners are backing out. A full Dvele roof replacement in Moreno Valley is a different job entirely, and the price reflects the panel count, slope, and whether the HOA requires specific roofing materials. Here is the line-item range we quote from.
| Dvele Service | Typical Price Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Home Addition | $45,000 – $130,000 |
Every estimate includes a written line item for the Dvele work, the permit path, and what we document for your HOA if one applies. Good work does not need a sales pitch; it needs the right materials and someone who knows what they are doing. Call (855) 600-3192 and we will walk the site with you and explain exactly what your Dvele needs.
Serving Moreno Valley, CA — Our Local Coverage Area
We’re based in the Moreno Valley area and know this community well, including nearby Dvele in March Air Force Base. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Moreno Valley
Yes. We are an independent contractor with direct experience assembling and finishing Dvele’s panelized wall and roof systems on infill lots and hillside pads across the east Inland Empire. We are not a Dvele-authorized or warranty-endorsed builder, but we have worked on enough Dvele Core, Signature, and ADU panel kits to know how their joints, structural portals, and pre-insulated assemblies behave once they sit under Moreno Valley sun. Call (855) 600-3192 for a site-specific review.
Those are the sun-loaded elevations. The same afternoon heat that produces the Rancho Belago stucco burn, the hairline cracks and faded paint on west- and south-facing walls, also hits Dvele in Woodcrest and nearby panel seams and factory-applied coating edges. The panel skin expands and contracts through repeated 100°F afternoons, the factory sealant hardens under UV exposure, and the joint opens. It is the most common Dvele repair call we get in Moreno Valley, and it is usually repairable without panel replacement if caught early. Call (855) 600-3192 to have a seam inspected before water gets in.
Yes, in almost every east-side tract. Moreno Valley’s post-1980s master-planned communities, including Sunnymead Ranch, Towngate, and Rancho Belago, review exterior changes through an architectural committee on top of city permits. That includes Dvele roof panel work, additions, and even visible panel-seam repairs where the HOA paint palette applies. We document the repair for your HOA file and match the approved color shades so the committee sees the job was done to spec.
Yes, specifically at the panel-to-panel and roof-to-wall transitions. Santa Ana gusts in March through May push rain sideways past sealant that has already been UV-hardened by the sun. In the Sunnymead Ranch and Dvele in Loma Linda areas, we traced a persistent ceiling stain to a roof-panel edge that had lifted after the spring winds drove water under the sealant. We pulled and re-set the affected panel edge, re-flashed the roof-to-wall transition, and re-sealed the west-facing panel joints. The homeowner got a dry ceiling and a documented repair for their HOA file instead of a full roof replacement. Call (855) 600-3192 to check your roof edges before the next Santa Ana season.
Roof repair on a Dvele panelized home here typically runs $400 to $1,800, depending on how many panel edges have lifted and whether we are re-flashing or re-setting fasteners. A full Dvele roof replacement runs $8,000 to $20,000, and a metal roof installation runs $15,000 to $40,000. A Dvele home addition starts around $45,000 and can reach $130,000 depending on the panel package and site work. Call (855) 600-3192 and we will quote your project against your actual lot conditions and HOA requirements.
Service Areas Near Moreno Valley
We serve Moreno Valley and the surrounding east Inland Empire. That includes Dvele service in Pomona to the west, Dvele service in Eastvale to the northwest, and Colton, Loma Linda, and Redlands to the north and east. If you own a Dvele in any of these cities, the panel behavior follows the same inland sun and wind patterns, and we quote accordingly.
Book Your Dvele Service in Moreno Valley Today
If your Dvele home has a panel seam opening, a roof edge lifted by wind, or an addition you are planning, call (855) 600-3192. We will schedule a site walk, explain what we see in plain terms, and give you a written estimate with the repair-vs-replace decision clearly stated. Estimates are free.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Moreno Valley and the east Inland Empire.