Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in San Antonio Heights, CA | Stallion Contractors
We provide independent Dvele construction service across San Antonio Heights, from panelized additions and ADU module sets to foundation-to-shell interface sealing that factory delivery stops short of. What makes our Dvele work different here is simple: San Antonio Heights is unincorporated San Bernardino County, not a city permit counter, and every Dvele panel set on these foothill lots has to clear county building review, wildfire code review, and often septic and well capacity checks before the first module leaves the factory. If you’re planning a Dvele addition or ADU in San Antonio Heights, call (855) 600-3192 and we’ll walk you through what the shell includes and what the site demands.
Why San Antonio Heights Residents Choose Us for Dvele Service
Dvele builds a factory-finished, high-performance modular shell, and we’ve spent years adapting those panelized systems to real foothill sites. That distinction matters in San Antonio Heights, where the parcels aren’t flat city lots. They’re large, sloped, and treed, often on private wells and septic systems, and the county’s geotechnical review flags slopes and drainage on nearly every project. Ruben Montoya, our owner, grew up in Colton and studied construction at San Bernardino Valley College, where the hands-on programs put him on job sites before he ever carried a business card. Two-plus decades of that work means we don’t look at a Dvele module as a finished product. We look at it as a shell that still needs to be correctly tied to a hillside foundation, sealed against Santa Ana wind, and finished out to county spec. Dvele sales & service experience with their panel interfaces, roof geometry, and factory finish tolerances means we catch what factory delivery never covers.
Styles & brands we work with
Common Dvele Construction Problems We Solve in San Antonio Heights
- Panel-to-foundation seals failing at the seam. The interface between Dvele’s factory panels and the site-built foundation is the first place Santa Ana-driven wind and dust intrusion shows up. On exposed foothill parcels in San Antonio Heights, those wind events push fine dust through any gap that wasn’t sealed with the right transition flashing. We re-seal and re-flash those interfaces to county spec before they become callbacks.
- Flat and low-slope Dvele roof assemblies ponding after a heavy storm. Factory roof geometry doesn’t always match the downslope drainage reality of a hillside lot. If the site drainage wasn’t re-engineered to the module’s roof plane, water ponds against the upslope retaining wall or backs up at the scupper. We re-grade, re-pipe, and re-engineer the drainage, and we do it before county inspection.
- Factory-finished Dvele cabinetry and millwork checking or gapping. Dvele’s cabinet and millwork packages are factory-finished, but San Antonio Heights summers are hot and dry. When modules sit on an unshaded hillside lot through a 100-degree inland summer before the building is closed in and conditioned, the wood moves. We see checking, gapping, and joint separation. We repair or replace finished surfaces with OEM-compatible finishes, and we say plainly when aftermarket is the better call.
- Exterior vents and penetrations failing wildfire-zone review. Dvele panel assemblies arrive with standard vents and trim. San Antonio Heights sits in a high fire-hazard severity zone on the wildland-urban interface, and the county’s WUI review requires ember-resistant vents, Class A roof assemblies, and defensible-space-compliant exterior materials. Standard Dvele penetrations don’t clear that review without retrofitting. We handle that retrofit before the inspector sees it.
- Foundation and drainage issues on sloped parcels. Dvele’s shell is only as good as what it sits on. On the foothill lots of San Antonio Heights, where slopes trigger geotechnical review, we see foundation designs that weren’t re-engineered to the module’s true weight and drainage patterns. We stabilize the foundation, re-grade the drainage, and bring the site up to county public works review standards.
Dvele Service in San Antonio Heights: What Local Conditions Mean for Your Equipment
San Antonio Heights is an unincorporated island of large-lot, semi-rural estates surrounded by the grid of San Bernardino County. That means construction here is custom-home, addition, and hillside work on private wells and septic systems, not tract build-out or commercial infill. Every project must clear County of San Bernardino building and public works review, not a city hall, and the county’s geotechnical review for slopes and drainage is standard on these foothill parcels. For Dvele owners, that changes the sequence. A Dvele panelized addition or ADU here isn’t just a panel-set problem. Septic capacity and well yield have to be confirmed with San Bernardino County before the module footprint is finalized, because the module’s size and placement depend on where the leach field can go and whether the well can handle the added demand. You never hit that permitting sequence on a sewered city lot. It’s a San Antonio Heights reality, and it’s exactly why we don’t order a Dvele module for a client here until the county signs off on the site constraints. We’re an independent contractor, not affiliated with or authorized by Dvele, and that independence means we can tell you honestly whether the county’s septic and well review will change your Dvele footprint before you spend money on a module that doesn’t fit the parcel.
Dvele Models & Products We Service in San Antonio Heights
We work on the Dvele product lines that actually show up on San Antonio Heights parcels: the Dvele prefab single-family modular home, including flat and low-slope roof configurations; the Dvele panelized home addition and ADU module series; Dvele high-performance wall and roof panel assemblies that arrive pre-insulated and pre-finished; and Dvele factory-finished kitchen and bath module packages. Where Dvele’s factory spec parts are available, we source them, because panel interfaces and finish tolerances are proprietary and aftermarket substitutes cause callbacks at the seams. Where they aren’t, we use equal-or-better aftermarket components and say so plainly. If a Dvele shell is sound but the site interface is the problem, we repair rather than recommend tearing out good modular work. That’s the honest repair-versus-replace standard we hold to on every job in San Antonio Heights.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in San Antonio Heights
Dvele construction work in San Antonio Heights is priced by scope, not by vague square-foot formulas. What drives the number is the site condition: slope, drainage, septic and well capacity reviews from the county, and wildfire-zone exterior requirements. Here are the ranges we work within for the Dvele-adjacent services we provide in this area, including Dvele service in Claremont and nearby foothill communities.
| Service | Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
Every free estimate we give includes a site walk, a line-item breakdown of what the Dvele shell includes and what it doesn’t, and a written quote with no change orders unless the county flags something after we open up the site. Call (855) 600-3192 to schedule yours.
Serving San Antonio Heights, CA — Our Local Coverage Area
We’re based in the San Antonio Heights area and know this community well, with experience extending to Rancho Cucamonga Dvele service calls. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in San Antonio Heights
It needs a county permit. San Antonio Heights is unincorporated San Bernardino County, so Dvele additions and ADUs here go through County of San Bernardino building and public works review, not a city hall. That includes geotechnical review for slopes and drainage, plus wildfire-zone exterior review. Call (855) 600-3192 and we’ll map out the exact sequence for your parcel.
Yes, but it usually requires retrofitting. Dvele panel assemblies arrive with standard vents and trim that don’t meet San Antonio Heights’ WUI ember-resistant requirements. We retrofit ember-resistant vents, Class A-compliant edge metal, and WUI-compliant exterior materials before county inspection. That work is part of the Dvele installation we handle here, and we’d rather tell you before you order modules than fail inspection after they’re set.
Usually not. It’s most often a site drainage issue. Dvele’s factory roof geometry doesn’t always match the downslope drainage of a foothill lot, and if the site drainage wasn’t re-engineered to the module’s roof plane, water ponds against the upslope retaining wall or backs up at the scupper. We re-grade, re-pipe, and re-engineer the drainage to county geotechnical spec, and we can usually fix it without touching the module itself — the same approach we take on Dvele repair in Montclair foothill jobs.
No. We’re an independent contractor, not affiliated with or authorized by Dvele. That independence means we can tell you honestly what the shell does and doesn’t include, and we repair rather than replace when the shell is sound but the site interface is the problem. We source Dvele factory spec parts where they’re available and say plainly when aftermarket is the better call.
Yes, and that’s non-negotiable in San Antonio Heights. These parcels are on private wells and septic systems, so septic capacity and well yield have to be confirmed with San Bernardino County before the module footprint is finalized. That’s a permitting sequence you never hit on a sewered city lot, and we handle it before any Dvele module is ordered. Call (855) 600-3192 for an exact site assessment.
Service Areas Near San Antonio Heights
We work throughout the foothill and inland communities around San Antonio Heights. That includes San Antonio Heights service area coverage, plus nearby Colton, Bloomington, Mentone, Dvele service in Loma Linda, and Dvele service in Redlands. If you’re within reach of the 91784 ZIP or these surrounding areas, we’ll come out and take a look at the site.
Book Your Dvele Service in San Antonio Heights Today
Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing. We know what a Dvele shell needs on a San Antonio Heights foothill parcel because we’ve done it, failed the inspection once or twice in the early days, and learned from every site. Call (855) 600-3192 to schedule your free estimate, and we’ll walk the parcel with you before you spend a dollar on modules.
Written by Ruben Montoya, Owner at Stallion Contractors, serving San Antonio Heights since our first Dvele panel set on a foothill lot.