KraftMaid Construction in Fontana, CA

KraftMaid Construction in Fontana, CA | Stallion Contractors

KraftMaid cabinet service in Fontana means working on semi-custom boxes that have survived two or three decades of Inland Empire heat, dry air, and the dust that blows down from the Cajon Pass. We’re Stallion Contractors, and we install, reface, repair, and replace KraftMaid cabinetry across Fontana’s 92335, 92336, 92337, and 92331 ZIP codes. The work here differs from other cities because the climate actively works against cabinet finishes and joinery, and because the housing stock puts specific demands on how a cabinet run gets reworked. Call (855) 600-3192 for a free estimate, or read on to understand what your KraftMaid kitchen actually needs.

Call (855) 600-3192

Why Fontana Residents Choose Us for KraftMaid Service

We’ve opened enough cabinet doors in Fontana tract homes to know exactly where KraftMaid cabinetry fails and when it’s worth saving. That’s the difference between a contractor who hangs a box and one who understands the cabinet line’s construction. KraftMaid has been around since 1969, and Fontana’s housing boom from the 1980s through the early 2000s put a lot of their semi-custom cabinets into kitchens here. Those cabinets are now hitting the age where hinges loosen, drawer boxes sag, and laminate faces start to lift. Ruben Montoya, our owner, grew up in nearby Colton and learned early that cabinet work means respecting the existing framing and plumbing you find behind the boxes. We’re an independent Fontana General Contractor, not KraftMaid-affiliated, and that independence lets us be honest about what your kitchen actually needs: a repair, a reface, or a full replacement. One contractor, every trade. Good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing.

Common KraftMaid Construction Problems We Solve in Fontana

Here’s what we find most often in Fontana kitchens, and what causes it:

• Thermofoil door delamination on sun-exposed runs. South- and west-facing cabinets near kitchen windows catch the worst of Fontana’s dry summer sun. The thermofoil layer separates from the MDF core and blisters, especially on upper cabinets. We see this in 92336 subdivisions with large western window banks. The fix is usually new door and drawer fronts matched to the run’s style; the boxes behind them are often still sound.
• Loose euro-hinge screws in particleboard cabinet sides. 1980s and 1990s KraftMaid cabinets used particleboard gables with plastic dowels holding hinge screws. Decades of daily use in 92335 tract homes wears those screw holes oval, so doors sag and won’t close flush. We repair with reinforced anchor plates or relocate hinges, and upgrade to soft-close hardware while we’re in there.
• Sink base cabinet swelling and joint separation. Slow plumbing leaks under the sink are common in aging Fontana homes where supply lines and drain seals are original. The kraftwood or particleboard sink base soaks up water, swells, and splits at the corner joints. We replace the sink base box and match the face frame to the surrounding run.
• Finish fading and grain checking on stained doors. Fontana’s location at the mouth of the Cajon Pass means wind-driven dust continuously abrades cabinet surfaces near windows and doors. Stained and natural maple or oak KraftMaid doors lose their sheen, then develop fine cracks in the finish. Refacing makes sense when the door profile is still available.
• Drawer box failures on heavily used base cabinets. The 2000s KraftMaid drawers with epoxy-coated slides and standard boxes crack at the corners where the front attaches. Pots and pans drawers take the worst of it. We rebuild with dovetailed hardwood boxes and full-extension slides when the original hardware is beyond saving.
• Out-of-square walls pulling face frames away. Many Fontana kitchens were framed in the post-war era when stud spacing and wall plumb were rougher. KraftMaid face frames get shimmed, but over time the gaps open up and corners separate. We pull the run, re-shim, and rehang with proper blocking behind the frames.

KraftMaid Service in Fontana: What Local Conditions Mean for Your Equipment

Here’s the thing about working on KraftMaid cabinets in Fontana that a generic service page won’t tell you. Many of the kitchens we open sit in post-WWII and late-20th-century tract homes where original cabinet layouts were squeezed around load-bearing walls and older plumbing chases. That means reworking a run often requires addressing out-of-square walls and relocating supply lines before new boxes go in, not just swapping doors. On a job off Sierra Avenue in the 92335 area, we pulled a Rialto KraftMaid service run where the sink base had swelled and the thermofoil doors had blistered from years of west-facing sun. We replaced the rotted sink base, refaced the remaining boxes in a matching Vantage door style, and upgraded to soft-close hinges and full-extension slides. The homeowner kept the layout and saved versus a full tear-out. That’s the kind of work Fontana’s housing stock demands: respect the existing structure, rework what’s necessary, and don’t push a replacement when the bones are good.

KraftMaid Models & Products We Service in Fontana

We work across KraftMaid’s model spectrum. The Vantage series with its oak, maple, and painted finishes shows up frequently in Fontana’s 1990s and 2000s kitchens. Deluxe full-overlay cabinetry is common in newer 92337 builds. Passage and semi-custom door styles in white and painted finishes appear in two-tone configurations across the city. When a door or drawer box needs replacing, we source genuine KraftMaid components wherever the series is still in production. When KraftMaid has discontinued a line, which happens regularly with older Vantage and two-tone runs, we use quality aftermarket soft-close hinges and full-extension drawer slides that match or exceed the original spec. We keep the most common euro-hinge patterns and slide lengths in stock, which means faster turnaround for Fontana jobs. For KraftMaid sales & service, Stallion Contractors covers cabinet installation, refacing, and full kitchen remodels.

KraftMaid Service Pricing in Fontana

KraftMaid work in Fontana is priced by the scope of the job, not by a flat rate. A simple door and hinge replacement runs at the low end. A full cabinet installation with modifications for out-of-square walls and relocated plumbing runs higher. Here are the ranges you should expect:

Service	Fontana Price Range
Cabinet Installation	$4,000 – $13,000
Small Kitchen Remodel	$9,000 – $20,000
Kitchen Remodel	$14,000 – $45,000
Countertop Installation	$2,000 – $6,500
Kitchen Island Installation	$3,000 – $10,000

What drives the price: whether we’re refacing existing boxes or installing new ones, whether plumbing or electrical work is needed, and what the finish and door style cost. Every free estimate includes a written line-item quote, so you’ll see exactly what you’re paying for before any work starts. Call (855) 600-3192 to schedule yours.

FAQs – KraftMaid Construction in Fontana

Service Areas Near Fontana

We provide KraftMaid cabinet service across Fontana and the surrounding communities. If you’re in KraftMaid service in Colton, KraftMaid service in Bloomington, Redlands, Loma Linda, or Mentone, the same team covers your job. We’re Fontana service area specialists, but we work the whole Inland Empire corridor.

Book Your KraftMaid Service in Fontana Today

Your KraftMaid kitchen has years left in it. Maybe decades, with the right repairs and hardware upgrades. Call (855) 600-3192 to schedule a free estimate. We’ll evaluate what you have, tell you straight what it needs, and give you a written quote before any work starts. From the kitchen to the roofline, Stallion Contractors handles the whole scope.

Written by Ruben Montoya, Owner at Stallion Contractors, serving Fontana and the Inland Empire.