Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Jurupa Valley, CA | Stallion Contractors
We provide independent PGT window, door, and construction service across Jurupa Valley, CA – diagnosing and repairing what’s on your wall rather than selling you a replacement you don’t need. What makes our PGT work different here is that we understand how these windows and doors actually fail in the Santa Ana River basin: inland heat stress, wind-driven dust, and a fragmented county-era building history that keeps us checking as-built conditions before we ever order parts. Call (855) 600-3192 for a free estimate.

Stallion Contractors is an independent PGT service provider. We’re not a PGT dealer, agent, or manufacturer affiliate. That matters because our recommendation is based on what’s actually wrong with your window or door, not on what we’re incentivized to sell. From PGT sales & service knowledge to full-scope remodeling, one contractor, every trade.
Why Jurupa Valley Residents Choose Us for PGT Service
PGT windows and doors show up across our General Contractor in Jurupa Valley‘s housing stock in predictable ways. The 1950s – 1970s ranch homes on large lots, the ranchettes with original septic and well systems, and the unpermitted county-era additions all carry PGT units that were installed under very different conditions than what today’s code would allow. We know the difference between a window failure and a wall opening failure, and we don’t mask the first by ignoring the second.
Ruben Montoya grew up in Colton near Pepper Avenue, where half the houses on his block were built by tradesmen who understood Inland Empire soil and sun before they ever picked up a hammer. He studied construction at San Bernardino Valley College, where the hands-on programs put him on real job sites before he had a business card. His father was a finish carpenter, which is partly why our crews still pay more attention to the final ten percent of a job than most contractors pay to the first ninety. Good work doesn’t need a sales pitch; it needs the right materials and someone who knows what they’re doing.
We serve Jurupa Valley service area with OEM-compatible PGT parts and honest repair-versus-replace guidance. When a fogged sash or a worn slider can be repaired, that’s what we recommend. When the frame itself has failed or the opening was never flashed correctly, we tell you that too, with photos and a written line-item quote so you can see exactly what you’re paying for.
Styles & brands we work with







Common PGT Construction Problems We Solve in Jurupa Valley
- Fogged insulated glass units on WinGuard windows. South-facing and west-facing PGT WinGuard windows in Jurupa Valley take direct afternoon heat for months at a time. When the seal between the panes fails, condensation and mineral haze show up between the glass. We replace the failed insulated unit with PGT OEM glass and keep the original frame in service whenever possible.
- Sliding glass doors that won’t track after Santa Ana events. Wind-driven dust and debris from the Santa Ana River bottom and the Rubidoux bluffs get into PGT slider tracks and abrade the rollers and weatherstripping until the door drags or binds. We rebuild the rollers, clean and re-lubricate the track, and replace worn seals so the door slides with one hand again.
- Corrosion and misalignment on older aluminum-series PGT frames. On rural ranchettes where irrigation overspray and dust collect in the tracks, older PGT aluminum screens and frame hardware show pitting and stiffness. We re-align the frames, replace corroded hardware, and set new screens where the originals have been destroyed by the inland conditions.
- Water intrusion at sill pans and perimeters on replacement PGT units. Many PGT windows in Jurupa Valley were set into wall openings that were never flashed correctly, especially on unpermitted county-era additions. When the rare heavy rain hits, water finds the gap. We pull the window, correct the opening, flash it properly, and reset the unit so the leak stops at the source.
- Odd-sized PGT retrofit openings from unpermitted additions. Jurupa Valley was stitched together from unincorporated county pockets like Mira Loma, Glen Avon, and Pedley, and the rough openings on older homes often don’t match the county records. We measure the as-built wall, not the permit file, and size the replacement PGT unit to what’s actually there.
PGT Service in Jurupa Valley: What Local Conditions Mean for Your PGT Windows and Doors
Because Jurupa Valley’s construction market is defined by its fragmented legacy of unincorporated county pockets – Mira Loma, Glen Avon, Pedley, Rubidoux, and Sunnyslope – the window and door rough openings on older homes often don’t match county-era records. A PGT replacement sized off a permit file from 1967 may not fit the actual wall opening on a house that was expanded twice under county rule, once with a permit and once without. We don’t trust the paperwork. We measure the as-built conditions, verify the framing and flashing, and only then do we order PGT units. That’s the difference between a PGT retrofit that seals correctly and one that leaks around the perimeter every time a storm cell pushes through the basin.
Take a 1960s ranch house off a large lot in Mira Loma. Our crew was called for fogged PGT WinGuard windows on the west wall and a sliding glass door that wouldn’t track. We pulled the failed insulated units, found the sill pan flashed to an unpermitted addition that didn’t match the county record, and reset the opening with proper flashing and drainage before installing new OEM glass and rebuilt rollers in the slider. The homeowner got clear glass and a door that slides again without us touching the rest of the frames. That’s the kind of work that actually matters in Jurupa Valley.
The climate adds another layer. Jurupa Valley sits in the Riverside – San Bernardino basin with hot inland summers and Santa Ana wind events. Construction has to account for extreme heat stress on PGT glazing and seals, wind-driven dust that works its way into every track and hinge point, and the need for proper flashing and drainage in a region that gets intense but rare rain. A window that’s flashed wrong can sit dry for nine months and then leak badly during the one heavy storm that matters.
PGT Models & Products We Service in Jurupa Valley
We service and install PGT WinGuard Aluminum Impact Series and WinGuard Vinyl Impact Series windows, PGT Architectural Series vinyl windows, and PGT Sliding Glass Doors in both vinyl and aluminum. Our parts approach is straightforward: PGT OEM glass and hardware where it keeps the existing frame serviceable, and quality aftermarket rollers, weatherstripping, and screens when OEM lead times or cost don’t justify the wait. We stock common PGT glazing units, rollers, and weatherstripping for fast Jurupa Valley turnaround, so you’re not waiting on a backordered part while a broken window lets the dust in.
We recommend repair before replacement whenever the frame is sound. A fogged sash or a worn slider usually gets repaired, not replaced, unless the frame itself has failed or the wall opening needs correction. Pro-grade materials, professionally installed, without the upsell pressure.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Jurupa Valley
PGT service pricing in Jurupa Valley depends on the scope of work, the model line, and whether we’re repairing an existing unit or installing a replacement. Here’s what you can expect based on our calibration for the Inland Empire market:
| Service | Typical Range |
|---|---|
| Window Replacement (PGT) | $4,500 – $15,000 |
| Impact Window Installation (PGT WinGuard) | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost: whether the existing frame can be kept in service, the size and shape of the opening (odd-sized retrofit openings from unpermitted additions cost more), and the flashing and drainage corrections required on the wall itself. A free estimate from us includes measurement of the as-built opening, a written line-item quote, and a straight answer on whether you need a repair or a replacement. Call (855) 600-3192 and we’ll put it in writing.
Serving Jurupa Valley, CA — Our Local Coverage Area
We’re based in the Jurupa Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Jurupa Valley
Yes. We pull the failed insulated glass unit, confirm the frame is still sound, and install new PGT OEM glass in the existing frame. That preserves the original PGT frame and costs far less than a full window replacement. Call (855) 600-3192 for a free estimate on your fogged unit.
In Jurupa Valley, it’s usually both. Wind-driven dust and debris get ground into the track, the rollers wear down, and the door starts dragging. We remove the door, rebuild the rollers, clean and re-lubricate the track, and replace the weatherstripping so it slides clean again.
Because the wall opening was likely never flashed correctly, or the flashing has failed after decades of heat cycling. In Jurupa Valley’s dry climate, a bad flashing detail can stay hidden for months until the one heavy storm comes through. We pull the window, correct the opening, and reset it with proper flashing and drainage. Call (855) 600-3192 – we’ll find the actual source of the leak.
We use PGT OEM glass and hardware where it keeps the existing frame serviceable, and quality aftermarket rollers, weatherstripping, and screens when OEM lead times or cost don’t justify it. You’ll always know which parts we’re quoting and why before the work begins.
Yes. We’ve done exactly that on ranch homes throughout Jurupa Valley, including a 1960s Mira Loma property where an unpermitted addition didn’t match the county record and the PGT windows had to be reset with proper flashing. We verify the as-built wall, correct the opening, and install the PGT units to current code. Call (855) 600-3192 for a free estimate.
Service Areas Near Jurupa Valley
Stallion Contractors serves Jurupa Valley and the surrounding Inland Empire communities, including Colton, Bloomington, Mentone, Loma Linda, and Redlands. If you’re in PGT service in Pedley or on the western edge near PGT service in La Verne, we can help with PGT window and door repair, replacement, and impact installations.
Book Your PGT Service in Jurupa Valley Today
If you’ve got a fogged PGT window, a slider that won’t track, or a leak that shows up when the rain finally comes, call (855) 600-3192 today. Estimates are free, the quote is always written, and we’ll give you a straight answer on repair versus replacement. Your project managed start to finish, built to the standard your home deserves.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Jurupa Valley and the Inland Empire.