Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Colton, CA | Stallion Contractors
We handle Tremron paver driveways, patios, and retaining walls across our Colton service area as an independent contractor, not a Tremron affiliate. What separates our Tremron work here is the same thing that separates Colton from neighboring cities: expansive clay on the hillside lots, hardpan and drainage issues on the flat postwar tracts, and a city grading review process that does not treat every installation the same. Call (855) 600-3192 to talk through your project, and we’ll tell you straight what your soil, slope, and budget actually require.
Why Colton Residents Choose Us for Tremron Service
We’ve installed and repaired Tremron sales & service products on enough Colton properties to know the difference between what a paver brochure promises and what a paver actually does after five summers of 105-degree heat and two winters of heavy sheet runoff. Ruben Montoya grew up not far from Pepper Avenue, and the houses he walked past as a kid were built by tradesmen who understood Inland Empire soil the way you understand your own driveway cracks. That local knowledge carries into every Tremron job we take on.
We’re not a manufacturer-authorized shop, and we won’t pretend to be. What we are is a contractor who has seen Tremron pavers fail for predictable, local reasons and has learned how to install them so they don’t. We stock the base materials, geogrid, and polymeric sand that hold up under Colton conditions, and we’ll source genuine Tremron units when a color or dimensional match matters.
Styles & brands we work with
Common Tremron Construction Problems We Solve in Colton
Every one of these failure modes shows up regularly in Colton. Here’s what we see, and what causes it:
- Efflorescence and salt leaching on pavers. Colton’s long dry summers pull moisture up through the paver, carrying salts that crystallize as white chalk on the surface. Then a winter storm hits and the cycle repeats. On hillside lots with poor drainage, we see this more aggressively than anywhere else in the area.
- Paver heaving and joint sand loss from expansive clay. The clay under La Loma and Reche Canyon lots swells when wet and shrinks when dry. A paver base that works on flat ground fails there within a season or two. The pavers shift, the joints empty out, and the surface starts to look like a dry lake bed.
- UV fading and surface chalking on colored pavers. South- and west-facing Tremron installations in Colton take brutal afternoon sun. After enough 100°F-plus summers, the color washes out and the surface turns chalky. It’s cosmetic, but homeowners notice.
- Retaining wall block cracking or bulging. When a Tremron Stonegate wall goes up on a slope without proper geogrid reinforcement, the soil load behind it eventually wins. We’ve torn into walls where the blocks were fine but the engineering was absent.
- Drainage failures under paver patios and driveways. Colton’s infrequent but intense winter rain has nowhere to go on slab-on-grade lots if the base wasn’t sloped and drained correctly. Water pools, the base erodes, and the pavers follow.
Tremron Service in Colton: What Local Conditions Mean for Your Equipment
Here’s the thing most Tremron pages won’t tell you, because it’s specific to Colton. The La Loma and Reche Canyon hillside lots sit on expansive clay that swells and shrinks with seasonal moisture. A Tremron paver installation on that soil needs deeper base excavation and geogrid reinforcement than the same job on flat ground in Tremron repair in Loma Linda or Redlands. The city’s grading scrutiny adds another layer: drainage plans for hillside hardscape get extra review, so a paver driveway that would sail through permitting elsewhere can stall here if the runoff plan looks thin. That’s why we don’t bid a Colton hillside Tremron job the same way we’d bid a flat-lot job in Bloomington. The base depth, the geogrid spec, and the drainage swale all change. On a steep La Loma driveway, we tore out a heaved Tremron Cambridge Cobble installation that had been laid over shallow base on expansive clay. We excavated 10 inches, added geogrid and compacted base, re-set the pavers with polymeric sand, and cut a new drainage swale to redirect winter runoff. The driveway has stayed flat through two rainy seasons since.
Tremron Models & Products We Service in Colton
We work with the Tremron lines that show up most often on Colton properties. Tremron Olde Towne Pavers and Cambridge Cobble Pavers are the most common on residential driveways and patios here, which means we’ve seen every wear pattern they develop in this climate. The Plaza Series shows up on larger commercial and semiformal residential jobs. For retaining structures, the Stonegate Wall System is the one we see in Tremron in Grand Terrace and nearby areas, and the one we repair most often when geogrid reinforcement was skipped on the first install. We source genuine Tremron components when color and dimensional match matter. For structural layers under the pavers, we use quality aftermarket base materials and geogrid, because the OEM doesn’t make those, and the right spec matters more than a brand stamp on crushed rock.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Colton
Pricing for Tremron work in Colton varies based on whether you’re on flat ground or a La Loma hillside lot, because the hillside jobs need deeper excavation, more base material, and geogrid. Here’s where the common project types land:
| Project | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives the number is base depth, slope, drainage requirements, and whether we’re removing an existing slab or starting from raw ground. Our free estimate includes a walk-through, a written line-item quote, and an honest read on whether repair or replacement makes more sense, because on hillside lots they are not the same conversation. Call (855) 600-3192 to schedule yours.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Colton
Expansive clay under the hillside lots swells when winter moisture reaches it and shrinks during Colton’s long dry summers, which moves the ground enough to shift a shallow paver base. The fix is deeper base excavation, compaction in lifts, and geogrid reinforcement before the pavers go down. On hillside projects, we also add a drainage swale so water never lingers under the base. Call (855) 600-3192 and we’ll assess your specific slope and soil before recommending a repair or a full re-set.
You can, but we rarely recommend it on Colton’s older postwar slabs. If the concrete has structural cracks, settlement, or poor drainage, the overlay inherits every one of those problems. On flat lots with a sound slab, an overlay can work. On hillside lots where the slab itself is moving, it’s a bad investment. We’ll look at the slab and tell you straight whether it’s an overlay candidate or a tear-out.
Years of 100°F-plus afternoons, especially on south- and west-facing exposures, break down the paver surface and fade the color. Tremron’s colored pavers develop a chalky look over time, and sealing helps slow it but doesn’t stop it. If color consistency matters, we recommend choosing pavers with the UV exposure of your specific Colton lot in mind before the install, not after.
Yes, for most retaining walls over three feet, and on Colton hillside lots the city’s grading review gets additional scrutiny. A wall that would be permit-light on flat ground in the core of Colton can require a grading plan and drainage analysis, unlike a Highgrove Tremron service on stable ground. We handle the plan, permit, and inspection as part of the job.
On expansive clay, the base matters more than the paver. We use a deeper crushed rock base compacted in lifts, with geogrid reinforcement on slopes or any lot where the clay is known to be reactive. For flat lots, a standard compacted base works when drainage is properly sloped. For hillside lots, there is no shortcut. Call (855) 600-3192 for an exact base spec on your property, and the estimate is free.
Service Areas Near Colton
We run Tremron service throughout Colton and the surrounding Inland Empire communities. If you’re in Tremron service in Bloomington, we’re close by. Same for Tremron service in Mentone, Redlands, Loma Linda, and San Antonio Heights. Hillside or flat lot, we bring the same base-depth discipline to every job.
Book Your Tremron Service in Colton Today
If your Tremron pavers are shifting, chalky, or draining wrong, the first step is a real look at the site, not a phone estimate. Call (855) 600-3192 to schedule a free estimate. We’ll walk the property, check the base, check the drainage, and tell you what the ground actually needs.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Colton since the day he learned what expansive clay does to a shallow paver base.