Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Garnet, CA | Stallion Contractors
We provide independent Tremron paver, wall block, and segmental retaining system installation and repair across Garnet, CA. What makes our Tremron work different here comes down to one thing: we build for the alluvial-fan terrain, not the flat valley floor. If you’re pricing a Tremron driveway, patio, or retaining wall in Garnet, call (855) 600-3192 for a free estimate from a contractor who has actually laid these products on graded desert hillsides.

Why Garnet Residents Choose Us for Tremron Service
We have laid Tremron pavers, wall block, and structural walls across the Coachella Valley foothills for long enough to know how their sand-set and engineered systems actually perform when the grade pitches toward a wash. Garnet isn’t a tract subdivision. The lots roll, the wind hits hard, and the ground under a Tremron patio shifts differently than anything on flat ground. Our crews understand what that means for base depth, joint sand, and edge restraint before the first paver goes down, and we bring that same expertise to Yucca Valley Tremron service calls as well.
We are an independent installer, not authorized or sponsored by Tremron, and we don’t lean on a manufacturer’s warranty to cover our mistakes. We specify products that suit the site, install them to handle Garnet’s specific drainage demands, and stand behind our own workmanship. That is a distinction with a lot of concrete behind it. Ruben Montoya, our owner, grew up in Colton near Pepper Avenue and cut his teeth on Inland Empire soil and sun. He’d tell you the same thing he tells every Garnet homeowner: good work doesn’t need a sales pitch, it needs the right materials and someone who knows what they’re doing.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Garnet
- Wind-scoured sand joints. Garnet’s exposed hillside lots get steady desert wind that strips loose joint sand out of Tremron paver fields in a single season. Once the sand goes, pavers migrate and edge courses shear. We re-set affected areas with polymeric joint sand and proper edge restraint so the field stays locked.
- Walls creeping after monsoon runoff. Mega Oldon-type block walls built without geogrid on alluvial-fan slopes start to bow after one or two heavy storms. Backfill that was never compacted in lifts settles and pushes the face outward. We pull the course, correct the backfill, and install geogrid where the wall actually needs it.
- Rutted driveways on graded pads. Tremron paver driveways on hillside lots rut when the engineered base depth was shorted or the apron wasn’t tied into a drainage swale. Flash-flood runoff finds the weak spot and undermines the subgrade. We over-excavate, rebuild the base, and grade the apron so water sheds off the drive instead of under it.
- Efflorescence and UV fading. Garnet’s intense desert sun and mineral-heavy irrigation water beat up unsealed Tremron pavers fast. Lighter blends like Chesapeake or Old Town show white efflorescence and storm-silt staining within a few years. We clean, treat, and seal where it will extend the life of the field without hiding the original color.
- Mismatched repair pavers. When a Garnet homeowner patches a broken paver with whatever the hardware store had, the blend never matches and the repair looks like a scar. We source Tremron OEM matching pavers for repair work so courses, color, and texture stay continuous across the whole field.
Tremron Service in Garnet: What Local Conditions Mean for Your Equipment
Here’s the checkable reality most outside contractors don’t price into a Garnet Tremron job: the community sits on alluvial-fan terrain where a dry wash can turn into a fast-moving debris flow after one desert storm. A paver patio in Garnet is not the same project as a paver patio in Palm Springs proper or anywhere else on the Coachella Valley floor, which is why our Tremron repair in Desert Hot Springs uses different specs than our hillside work here. Those valley jobs often get by with a standard 4-inch base and basic edge restraint. A Garnet hillside lot needs engineered base depth, drainage swales cut into the slope, and sometimes geogrid under the paver field to keep the whole installation from sliding when runoff channels through the yard. We once rebuilt a Tremron driveway on a hillside parcel off the Garnet wash above Palm Springs that had heaved after monsoon runoff undercut the apron. Our crew over-excavated to engineered base depth, set geogrid, tied the wall backfill into compacted lifts, and re-set the field with polymeric joint sand and edge restraint so the drive sheds water instead of trapping it. That job would have failed again in two years with a valley-floor spec. In Garnet, the ground itself dictates what gets built on top of it.
Tremron Models & Products We Service in Garnet
We install and repair the Tremron lines most common in desert-adapted residential work: the Oldcastle High Velocity and Highland series pavers for driveways and walkways, Mega Oldon wall block for segmental retaining walls, Chesapeake and Biscayne pavers for patios and pool decks, and Brookstone or Old Town Blend for older Garnet homes where the original color needs matching. For repair work we use Tremron OEM matching pavers and wall units so courses and blends stay continuous. When we are re-sanding and re-securing a sound installation, we tell the owner that. When the base or drainage has failed, patching only the visible pavers just moves the problem, so we price the base and drainage correction instead. You can learn more about our broader Tremron work on our Tremron sales & service page.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Garnet
Garnet projects run on the same market ranges we use across the Coachella Valley foothills, with site grading and drainage work added when the slope demands it. Here is what to expect:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Home Addition | $45,000 – $130,000 |
What drives the number is base depth, geogrid where the slope requires it, drainage swale work, and how much of the existing field can be salvaged versus rebuilt. Every estimate includes a written line-item breakdown. If you’re weighing a Tremron patio against a driveway replacement or thinking about a home addition that ties into your hardscaping, call (855) 600-3192 and we’ll walk you through what the Garnet site actually calls for.
Serving Garnet, CA — Our Local Coverage Area
We’re based in the Garnet area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help, including Tremron in Morongo Valley and surrounding foothill communities.
FAQs – Tremron Construction in Garnet
Yes. In Garnet, the alluvial-fan terrain and flash-flood runoff paths mean we over-excavate to a deeper engineered base and grade the apron with a drainage swale. A standard valley-floor base depth will rut and heave after one heavy monsoon. Call (855) 600-3192 and we’ll tell you exactly what your lot requires.
Only if it is built for it. Mega Oldon-type block walls on Garnet slopes need geogrid laid in from the face and backfill compacted in lifts, otherwise runoff pressure will creep and bow the wall. If your existing wall is leaning or bulging, the fix is usually backfill correction plus geogrid, not just resetting the face block.
We use polymeric joint sand and edge restraint on every exposed hillside installation in Garnet. Polymeric sand locks once moisture hits it and resists the wind scour that strips standard joint sand out of Tremron paver fields here within a season or two.
Often yes. Garnet’s hillside lots and alluvial-fan drainage paths mean retaining walls, significant cut-and-fill, or drainage channel work can trigger Riverside County grading requirements. We pull permits where the scope calls for it and coordinate the inspections so you do not inherit a code problem later.
Yes. We source Tremron OEM matching pavers so the repair blends into the existing field. Whether it’s Chesapeake, Biscayne, Brookstone, or Old Town Blend, we match the color, face, and texture instead of leaving you with a patch that never looks right. Call (855) 600-3192 for a free estimate on the repair scope.
Service Areas Near Garnet
We serve Garnet and the surrounding communities, including the full Garnet service area, Colton, Bloomington, Mentone, and Loma Linda. If you’re nearby and pricing a Tremron project, take a look at our Tremron service in Buena Park and Tremron service in Sedco Hills pages to see how we approach the same product on different terrain.
Book Your Tremron Service in Garnet Today
Every Garnet Tremron project starts with a free on-site estimate. Call (855) 600-3192 and we’ll look at your slope, your drainage, and your existing hardscape, then give you a straight answer on what it takes to do the job right.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Garnet, CA and the surrounding Coachella Valley foothills.