Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Jurupa Valley, CA | Stallion Contractors
We install, repair, and replace Tremron pavers and wall block across Jurupa Valley. Stallion Contractors is an independent contractor, not a Tremron dealer or authorized affiliate – which means our recommendations come from what your specific lot in 91752 actually needs, not a manufacturer playbook. If you’re planning a Tremron paver driveway, patio, or retaining wall in Jurupa Valley, call (855) 600-3192 for a free estimate that starts with the ground under your feet, not a catalog page.

Tremron Construction in Jurupa Valley: Why Lot History Comes First
Jurupa Valley isn’t one city with one set of records. It’s a quilt of former county pockets – Mira Loma, Glen Avon, Pedley, Rubidoux, and Sunnyslope – stitched into a municipality in 2011. That matters for Tremron work because a paver driveway on a Mira Loma ranch lot may sit on ground that was citrus groves or dairy operation forty years ago, with no county record of the fill or the grading. Ruben Montoya grew up in Colton, not far from Pepper Avenue, where he learned early that the Inland Empire’s soil doesn’t always match what the paper says. We bring that same skepticism to every Jurupa Valley paver job: verify what’s actually under the surface before we put a single paver down.
For a full picture of our coverage, see our Jurupa Valley service area page.
Styles & brands we work with







Why Jurupa Valley Homeowners Pick Us for Tremron Work
Most contractors can lay pavers. Few can tell you why a Tremron Olde Towne driveway on one side of Mira Loma holds up for fifteen years while the same paver on the other side of the 60 shifts and cups within three. The difference is nearly always the base – and the base is nearly always a function of what the ground was before the house was there. We’ve been doing Tremron sales & service long enough to know that skipping over-excavation on old agricultural fill is the most expensive shortcut a homeowner can take.
Ruben’s background matters here. His father was a finish carpenter, and that attention to the final ten percent of a job shows up in our paver seams, edge restraints, and drainage grading. We also hold partnerships with 50-plus trade-grade brands – roofing, windows, fencing, hardscaping – so when a Tremron project touches a roofline or a fence line, it’s still one contractor, one contract, and one person you can call when something’s off. One contractor. Every trade.
Common Tremron Construction Problems We Solve in Jurupa Valley
These are the failures we see repeatedly in Jurupa Valley, and each one ties back to something specific about this place:
- Settling and joint-sand loss on fill-rich lots. The bluff-adjacent areas in Rubidoux and the old dairy ground around Mira Loma were never uniformly compacted. Pavers set on native fill without proper over-excavation settle within two or three seasons, and the joints start losing sand. We re-compact and re-set the field with Tremron-compatible joint sand so it drains and stays put.
- Edge creep where original installs skipped restraints. Many 1950s-to-1970s ranch homes got paver driveways long after the house was built. The original installer often saved a few dollars by skipping edge restraints. In Jurupa Valley’s summer heat, the base expands and the outer pavers walk outward. We rebuild the edge with proper restraint and reset the pattern.
- Efflorescence after hard winter rain on flat lots. When drainage was graded toward the house – common on flat county-era parcels – water sits against the pavers and white mineral staining appears after the first real rain. We address the drainage grade first, then clean and re-sand. Staining with no drainage fix is just postponing the problem.
- Bulging Tremron Georgetown and Plaza walls. Walls built without geogrid or drainage aggregate behind them push outward in Jurupa Valley’s wet-dry cycle. We rebuild these properly: excavation, drainage stone, geogrid where the wall height demands it, and Tremron’s own wall block.
- Color mismatch on patch repairs. Homeowners patch one corner of a paver driveway with whatever paver they can find at the local yard and end up with a visible seam. We source Tremron’s own color-matched caps and pavers so the repair blends and the value of the hardscape holds.
Tremron Service in Jurupa Valley: What Local Conditions Mean for Your Pavers
The 91752 corridor around Mira Loma and Tremron in Eastvale still carries county-era record gaps. A Tremron driveway or patio on a ranch lot often means we have to confirm the parcel’s actual record-of-survey and as-built footprint before we can legally lay out the hardscape. In practice, that means a setback from a recorded easement may not match what a previous owner built or fenced. It changes where the paver field sits, how drainage is graded, and whether a retaining wall needs a permit under the current city code rather than the old county one. We’ve spent enough time pulling these records – and phoning the departments that sometimes can’t find them – that we factor the research into our estimate. If your property has an old county record and a newer city overlay, call (855) 600-3192 before you start digging. Free estimates include that legwork.
Tremron Models & Products We Service in Jurupa Valley
We work with Tremron’s paver lines: Olde Towne, Paseo, and Stonegate series; the Georgetown, Cambridge, and Plaza wall block; and the large-format Mega-Olde Towne and Mega-Bergerac pavers. When a repair calls for color-matched caps or edge restraints, we source Tremron’s own parts – not a generic substitute – so patched sections don’t read as a scar. For bigger runs, we keep our sourcing local to speed up Jurupa Valley turnaround. And we’ll give you an honest answer on whether lifting and resetting a tired paver field makes sense or whether the subgrade says rebuild. Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Jurupa Valley
Here’s what Tremron work typically costs in the Jurupa Valley market. These are project ranges, not quotes – an actual quote comes after we inspect your lot, check the record-of-survey, and test what’s under the surface.
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives the number: site access, the condition of the subgrade (we’ve rarely met a Mira Loma lot that didn’t want more compaction), how much material we haul off, and whether drainage has to be re-graded. A free estimate from us includes that evaluation. Call (855) 600-3192 and we’ll walk the site with you.
Serving Jurupa Valley, CA — Our Local Coverage Area
We’re based in the Jurupa Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Jurupa Valley
No. Pavers need a compacted, graded base – not an old gravel apron laid over whatever the county era left beneath it. We remove the gravel, test and re-compact the subgrade in lifts, then lay Tremron pavers on a properly graded base with edge restraints. This is the only way a Mira Loma driveway stays flat through Jurupa Valley summers and Santa Ana winds. Call (855) 600-3192 and we’ll assess your specific driveway for free.
They hold up as well as any concrete paver can – which is well – if the base and joints are right. The heat will stress any base that wasn’t compacted properly, and Santa Ana winds blow dust and debris into open joints, which grinds away the sand over time. We compact the base correctly, use Tremron-compatible joint sand, and treat drainage as part of the paver job, not an add-on.
Yes, and it changes the job. Old citrus roots, wood debris, and the soft fill that came with them don’t support a paver patio. We over-excavate that layer, haul it off, re-compact clean fill in lifts, and only then lay your Tremron pavers. It’s more work, but it’s the difference between a patio that stays flat and one that settles in year three. Call (855) 600-3192 for an exact quote – estimates are free.
Yes. We source Tremron’s own color-matched pavers, caps, and edge restraints for repairs so the patched section blends with the field. We don’t substitute cheaper paver blocks that don’t match. If your repair is in 91752, we’ll pull the specific product line and color from our supplier network and have it staged for the shortest realistic turnaround.
It can change the layout entirely. Parcels that were unincorporated county land may have easements, setbacks, or as-built footprints that were never fully transferred into the city’s current records. Before we set the paver field, we confirm the record-of-survey and the current city’s setback requirements. If the driveway has to shift to stay code-compliant, we flag that in the estimate, not mid-project. Call (855) 600-3192 – we’ll walk you through what applies to your parcel.
Service Areas Near Jurupa Valley
We serve Jurupa Valley and the surrounding Inland Empire communities, including Colton, Bloomington, Loma Linda, Redlands, and Mentone. If you’re in Pedley, see Tremron service in Pedley. If you’re further west toward the foothills, see Tremron service in La Verne.
Book Your Tremron Service in Jurupa Valley Today
If you’re planning a Tremron paver driveway, patio, or wall in Jurupa Valley, start with our General Contractor in Jurupa Valley and the ground truth. Call (855) 600-3192 to schedule your free estimate. We’ll walk your lot, check the records that matter, and give you a straight answer on the base, the drainage, and the paver field – no dealer script, no pressure.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Jurupa Valley and the Inland Empire.