Unilock Construction in Corona, CA

Unilock Construction in Corona, CA | Stallion Contractors

We install and repair Unilock paver driveways, patios, and retaining walls across Corona, and we’re an independent Unilock provider – not authorized, sponsored, or warranty-backed by the manufacturer. What sets our Unilock work apart here is that we build for Corona’s expansive clay soils and Elsinore Fault setback hillside lots, not a flat-lot template. If your Unilock field is settling, heaving, or losing joints in Sierra Bella, Bedford, or Temescal Valley, call (855) 600-3192 for a free estimate.

Call (855) 600-3192

Why Corona Residents Choose Us for Unilock Service

Ruben Montoya, our owner, grew up in Colton where half the houses on his block were built by tradesmen who understood Inland Empire soil and sun. He learned early that hardscaping in this region isn’t a flat-lot job. That’s why our Unilock service in El Cerrito Corona starts with what’s under the pavers – not what’s on top of them. We’ve re-built enough settling Brussels Block driveways and bowing Beacon Hill walls on graded hillside lots to know exactly what Corona’s clay does to a base that wasn’t engineered for it.

We carry Unilock-manufactured pavers, wall block, and matching accessories where the product line is still in production. For base materials, geogrid, and polymeric sand, we source dimensionally matched quality aftermarket product where Unilock doesn’t supply it. Homeowners in Eastvale and Corona call us because they want a contractor who can explain why their paver field failed – and fix it so it stays fixed.

Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing.

We’re a full-scope general contractor, which means the same crew that handles your Unilock driveway or patio can also manage roofing, fencing, countertops, or an ADU. One contractor. Every trade. If you’re planning a larger exterior project in Norco or Corona – say, paver hardscaping alongside a roof replacement or fence line – we handle the coordination so you don’t have to.

Every Unilock project we take on in Corona gets a written line-item quote. No change orders after the fact. No patching a failed base and calling it done. You’ll know what you’re paying for before we break ground.

Ready to talk? Call (855) 600-3192 for your free estimate. We serve the full Corona service area including 92882, 92883, 92877, and 92878.

Common Unilock Construction Problems We Solve in Corona

• Paver heave and settlement on expansive clay. In Sierra Bella and Bedford, the clay soil expands and contracts with seasonal moisture. When a Unilock base was laid shallow – or without adequate compaction – the pavers shift, edges settle, and the field develops a wavy, rocking feel underfoot. We excavate to engineered depth, re-compact, and re-lay the field so it stops moving.
• White powder (efflorescence) on Brussels Block pavers. Corona’s hot, dry summers pull mineral salts up through the paver surface. When irrigation oversprays the field, the problem gets worse. It’s cosmetic, but it alarms homeowners. We clean the surface and adjust drainage or irrigation so the bloom doesn’t keep coming back.
• Retaining wall block bowing or leaning. Beacon Hill and Estate Wall retaining walls in Corona’s hillside tracts often lean because wall drainage and geogrid weren’t designed for winter slope erosion or Santa Ana wind-driven runoff. We rebuild the wall with proper drainage, geogrid reinforcement, and setback-compliant engineering.
• Polymeric sand loss and joint erosion. After a full Corona summer of 100°F-plus days and UV exposure, polymeric sand joints break down. Joints wash out during winter rains, and weeds take the field. We re-sand joints and address the drainage issues that caused the washout in the first place.
• Driveway apron failure holding water. We regularly see Brussels Block driveways in Corona where the apron settles and traps water against the garage slab. The fix isn’t just re-setting the pavers – it’s re-building the base so water drains away from the structure instead of pooling at the door.

Unilock Service in Corona: What Local Conditions Mean for Your Equipment

Corona sits at the junction of three geological zones – the Elsinore Fault, the Chino Hills, and the Santa Ana River corridor. Construction here is dominated by hillside grading, retaining wall engineering, and earthquake-resistant foundations in the master-planned communities of Sierra Bella, Bedford, and the Temescal Valley. This isn’t simple flat-lot tract work.

What this means for Unilock owners is specific: Elsinore Fault setback requirements and expansive clay soils in Sierra Bella and Bedford often demand engineered base depth and geogrid reinforcement that flat-lot inland installations never call for. A paver driveway in, say, Colton or Redlands might get by with a standard compacted base. The same driveway built on a Corona hillside lot over expansive clay will fail within a few seasons if the base wasn’t engineered for clay movement and slope drainage. We’ve seen it happen. In the Sierra Bella hillside tracts, our crew rebuilt a settling Brussels Block driveway where the original base had been laid shallow over expansive clay. The field was rocking and holding water at the apron. We excavated to engineered depth, re-compacted with geogrid, re-set the Unilock field on a proper base, and re-sanded the joints with polymeric sand. That driveway now drains away from the garage and hasn’t heaved through a full summer.

If your Unilock field is on a graded Corona lot and you’re seeing settlement, bowing, or joint loss, the problem is almost never the paver itself. It’s what’s underneath. And that’s exactly what we fix.

Unilock Models & Products We Service in Corona

We install, repair, and re-base the Unilock product lines most common in Corona’s residential market:

• Brussels Block – the tumbled, traditional paver used heavily on Corona driveway aprons and walkways. We keep matching product on hand for re-set and repair jobs.
• Brussels Dimensional Stone – rectangular modular paver for patios and pool decks. We handle full installations and joint re-sanding.
• Beacon Hill – tumbled wall block for retaining walls on graded hillside lots. We rebuild leaning walls with proper drainage and geogrid.
• Unilock Estate Wall – estate-grade retaining wall systems for taller grade changes. We engineer these to Corona’s setback and slope requirements.

For parts and repair, our approach is straightforward: we use Unilock-manufactured pavers and wall block where the system is still in production, and we source dimensionally matched quality aftermarket base, geogrid, and polymeric sand where Unilock doesn’t supply it. When a field has isolated settlement, we re-set and re-base the affected area. When the whole base was never engineered for Corona clay, honest repair means rebuilding the base and re-laying the field – not patching pavers on top of a failing foundation.

For broader Unilock work, see our Unilock sales & service page.

Unilock Service Pricing in Corona

FAQs – Unilock Construction in Corona

Service Areas Near Corona

Stallion Contractors provides Unilock installation and repair across the Inland Empire. Beyond Corona, we serve Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, and Redlands. For Unilock work further east, see our Unilock service in Banning page or our Unilock service in Mead Valley page.

Book Your Unilock Service in Corona Today

If your Unilock driveway is settling, your retaining wall is bowing, or you’re planning a new paver patio in Corona, we’ll come out, assess the site, and give you a written estimate. No obligation, no pressure. Call (855) 600-3192 and Ruben or one of our crew will get you scheduled.

Written by Ruben Montoya, Owner at Stallion Contractors, serving Corona and the Inland Empire.