Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Highland, CA | Stallion Contractors
We provide independent General Contractor in Highland Dvele construction service across Highland, including the foothill-edge neighborhoods where wildfire-hardening rules change what a repair actually requires. We know Dvele’s modular envelope, its panelized assemblies, and the connection hardware the factory ships with, and we service it all without routing you back through a factory channel. If you own a Dvele home or are planning a Dvele addition in the 92346 area, call (855) 600-3192 for a straight answer and a free estimate.
Why Highland Residents Choose Us for Dvele Service
Most contractors in the Inland Empire have never opened up a modular wall panel. We have. That matters when a Dvele roof seam starts leaking or a module joint opens up after a wind event, because the fix is not a standard shingle patch. It’s factory gasket work, sealant tape replacement, and connection hardware that has to be re-torqued or swapped correctly. We have spent enough hours inside Dvele panelized wall, floor, and roof assemblies to know which fasteners the factory used and which ones fail first under Highland’s dry heat and Santa Ana wind. Ruben Montoya, our owner, grew up in Colton and has been on Inland Empire job sites for more than two decades. He has seen exactly how foothill weather punishes a home that was built somewhere else, and he built Stallion Contractors around the idea that the right materials and a contractor who can read the site matter more than any sales pitch.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Highland
Here is what actually goes wrong on Dvele homes in this climate, and how we address it:
- Module-to-module roof seams and panel joints. The factory gaskets and sealant tapes age fast under Highland’s intense UV and dry heat. When a Santa Ana event pushes wind-driven rain against a slope-facing module joint, that is exactly where water gets in. We pull the old sealant, reset the gaskets with factory-correct or better hardware, and apply UV-stable sealant that holds.
- Roof and wall penetration flashings. Vents, skylights, and utility chases on foothill-edge lots take uplift and ember exposure that flatland homes never see. We find lifted flashings, loose fasteners, and ember-entry points after wind events, and we re-flash and re-seal them to survive both county review and the next storm.
- Insulation and air-sealing gaps at panel joints. A Dvele high-performance envelope only works if every joint is tight. Small gaps around rough openings or panel intersections show up as hot rooms in July and condensation in winter. We find those gaps, re-seal them, and bring the envelope back to what the factory intended.
- Exterior cladding and trim fastening. On the exposed foothill edges of Highland, sun-baked and wind-loaded elevations loosen trim, gaskets, and fastener seals faster than on flat lots. We re-secure cladding, replace failed fasteners, and detail the slope-facing walls so they do not open up again in the next wind season.
- Block-wall and hillside drainage at module foundations. Winter rain funnels off the slopes and collects against older block walls and module set points. We correct drainage so water stops working into the seams and sills of the modular assembly before it compromises the envelope.
Dvele Service in Highland: What Local Conditions Mean for Your Equipment
Highland sits in the foothills band of San Bernardino where the Santa Ana winds, the wildland-urban interface, and San Bernardino County’s fire-hardening standards all converge. That is a different job than Dvele in Redlands or San Bernardino does a few miles west. On Highland’s foothill-edge lots, Dvele roof and envelope work often triggers county fire-hazard review and wildland-urban-interface requirements that a flatland modular job would clear over the counter. That means our panel seam, flashing, and cladding details have to pass defensible-space and ember-resistance review, not just keep water out. We had a Dvele modular home on a foothill-edge lot in the 92346 area with wind-driven water staining at two roof-panel seams and a lifted vent flashing after a Santa Ana event. Our crew pulled the compromised sealant tape, reset the seam gaskets with factory-correct hardware and UV-stable sealant, re-flashed the vent, and added ember-resistant detailing at the slope-facing wall penetrations so the repair would hold up to the county’s fire-hazard review. That is the standard a Highland Dvele home requires.
Dvele Models & Products We Service in Highland
We work on the full Dvele line that shows up in Highland: the single-family modular home system with factory-built wall, floor, and roof modules set on site; Dvele ADU and backyard home modules; and custom modular builds delivered to semi-rural foothill lots. We also service the high-performance envelope package, including double-stud panels, dense-pack insulation, and the triple-glazed window system. When factory parts have long lead times, which happens often with modular builds, we match the original spec with quality aftermarket sealants, tapes, and cladding components that meet or exceed it. Our default is to repair and re-seal the envelope first. We only recommend wholesale replacement of a module assembly when seams, framing, or moisture damage have gone too far to save. For deeper Dvele background, see our Dvele sales & service page.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Highland
What you pay depends on what we find when we open up the seam or flashing. Here are the ranges we quote for Dvele work in Highland:
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
Every estimate is line-itemed so you can see exactly where the money goes. The free estimate includes a physical inspection of the relevant roof, wall, or envelope condition. Call (855) 600-3192 to schedule one.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Highland
Yes. We are an independent contractor and service Dvele seams, gaskets, and flashings directly. We use factory-correct connection hardware where it exists and quality aftermarket sealants and tapes that meet or exceed spec when factory parts are backordered. Call (855) 600-3192 to have your roof seam inspected.
Often yes, especially on foothill-edge lots in the 92346 area. San Bernardino County fire-hazard review and defensible-space requirements apply to many modular additions and ADUs in Highland that would clear over the counter a few miles west. We build the envelope and cladding details to pass that review from the first inspection, unlike Dvele service in Loma Linda that faces simpler flatland rules.
Highland’s dry heat bakes sealants and gaskets until they harden and crack. Then the Santa Ana winds load the slope-facing elevations and lift flashings, loosen fasteners, and drive water into any seam that has begun to open. We detail exterior cladding and trim on Highland Dvele homes for that specific failure pattern.
Dvele roof repair typically runs $400 to $1,800 depending on how many seams and flashings need work. A full roof replacement ranges from $8,000 to $20,000, and a metal roof install runs $15,000 to $40,000. Call (855) 600-3192 for an exact line-item quote; estimates are free.
No. Stallion Contractors is an independent Dvele service provider. That independence is the point: we can spec the right repair for what your modules actually need instead of steering everything back through one factory channel. See our Highland service area page for where we work.
Service Areas Near Highland
We serve Highland and the surrounding foothill and valley communities. If you are in Dvele service in San Bernardino or Dvele service in Rialto, we cover those areas as well. We also work in Colton, Bloomington, Mentone, San Antonio Heights, Loma Linda, and Redlands.
Book Your Dvele Service in Highland Today
If your Dvele roof seam is leaking, your cladding is lifting, or you are planning an addition or ADU in Highland, call (855) 600-3192. We will put eyes on the problem and give you a straight answer, a written line-item quote, and a repair that survives the next Santa Ana event.
Written by Ruben Montoya, Owner at Stallion Contractors, serving Highland since the company’s early days.