Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in San Bernardino, CA | Stallion Contractors
We’re an independent construction firm that builds and finishes Dvele prefab homes across San Bernardino. Our crews have assembled and completed multiple Dvele shells here, which means we know exactly how this panelized system behaves in local heat, wind, and foothill fire zones. If you’re planning a Dvele build, remodel, or fire-hardening retrofit, call (855) 600-3192 for a free estimate. We’re not affiliated with Dvele the manufacturer. We’re the crew that knows how to make their systems work in this city.
Why San Bernardino Residents Choose Us for Dvele Service
Ruben Montoya grew up in Colton, just down the road from Pepper Avenue, where half the houses on his block were built by tradesmen who understood Inland Empire soil and sun better than most. He picked up his construction foundation at San Bernardino Valley College, and for more than two decades he’s been a General Contractor in San Bernardino on job sites across this valley. That history matters when you’re trusting someone with a Dvele shell.
We’ve built and finished Dvele LUMEN, VUE, SOL, and Custom Modular projects from the valley floor up into the Verdemont foothills. We understand the panel connection details, the tolerances, and the finish-out sequencing that generic builders get wrong. When a Dvele panel joint fails from heat or a vent lets embers through, we know what it takes to set it right. More on our broader Dvele sales & service work is available if you want the full picture of how we approach this system.
We’re licensed, insured, and accountable to one name: Stallion Contractors. One contract covers the shell, the finishes, the roofing, the foundation interface. You don’t coordinate three vendors and hope they talk to each other.
Styles & brands we work with
Common Dvele Construction Problems We Solve in San Bernardino
- Panel joint sealant degradation from UV and heat. San Bernardino summers routinely push past 100°F, and the intense sun breaks down standard sealants at Dvele panel seams. We replace aged sealants with UV-stable, high-performance products rated for inland desert conditions.
- Ember intrusion at vent penetrations and soffit gaps in WUI zones. Foothill neighborhoods like Verdemont and Del Rosa sit inside California’s wildland-urban interface rules. Standard Dvele vent detailing often isn’t enough. We upgrade to ember-resistant vents and re-seal every penetration.
- Thermal movement stress on factory-applied finishes. The swing between hot valley days and cooler nights causes panels and cladding to expand and contract. Hairline cracks and backed-out fasteners are common. We re-secure, re-finish, and adjust as needed.
- Foundation interface issues on sloped foothill lots. Dvele’s panelized system meets conventionally poured stem walls, and on graded lots that junction needs custom shimming and anchoring. We plan for elevation changes before the first panel goes up.
- Kitchen-remodel integration inside a Dvele shell. Prefab homes aren’t always laid out for the kitchen a San Bernardino homeowner actually wants. We remodel interiors without compromising the structural panel system behind the finishes.
Dvele Service in San Bernardino: What Local Conditions Mean for Your Equipment
San Bernardino is two construction environments in one city. On the valley floor, summer heat regularly exceeds 100°F and UV exposure is relentless. Up in the foothills, the same Dvele build faces a completely different set of rules: California’s WUI fire-hardening code. Ember-resistant vents, Class A roofing, defensible-space clearing. A Dvele in Highland or Verdemont doesn’t need the same detailing as one in the 92411 flats near the logistics corridor, and if you try to spec both the same way, one of them will fail early. We adjust by elevation, not just by code.
On a VUE Series home in Verdemont, we found ember intrusion risk at the soffit vents and panel joints that had been caulked with a standard sealant now cracked from UV exposure. We upgraded to ember-resistant vents, re-sealed all joints with a high-performance intumescent sealant, and added Class A roof underlayment at the eave. The home came into WUI compliance, and the slow air leak that had been driving up summer cooling costs stopped.
Good work doesn’t need a sales pitch – it needs the right materials and someone who knows what they’re doing. That’s the work we do across San Bernardino service area projects, from 92408 up to the mountain edge.
Dvele Models & Products We Service in San Bernardino
We work on the full Dvele lineup: the LUMEN Series, VUE Series, SOL Series, and the Custom Modular Line. For structural junctions, panel connections, and weather-tight seams, we source OEM Dvele hardware and sealants. Those are the spots where aftermarket parts compromise system integrity. For finishes and fire-hardening components, we use high-quality alternatives: ember-resistant vents, Class A underlayments, and UV-stable exterior products that meet or exceed Dvele’s factory specs.
When a panel or finish shows localized damage, we repair it first. If damage is widespread across a Dvele shell, we’ll tell you straight: replace or rebuild. We don’t patch the same seam three times and call it done. That’s how a homeowner ends up paying twice.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in San Bernardino
What drives cost on Dvele work here is elevation, plus the scope of finish work. A valley-floor kitchen remodel inside a Dvele shell runs different numbers than a full roof replacement in a WUI zone. Here’s where realistic projects land:
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Roof Replacement | $8,000 – $20,000 |
| ADU Construction | $90,000 – $220,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Every estimate is free and written line by line. No change orders buried in the fine print. The price you see is the price we stand behind. Call (855) 600-3192 for an exact quote on your Dvele project in San Bernardino.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and offer Dvele service in Muscoy and throughout this community we know well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in San Bernardino
Yes. Dvele panels meet your foundation at the stem wall, and on graded foothill lots that junction needs custom shimming, anchoring, and sometimes stepped footings. We evaluate the slope before any panel order is finalized. Call (855) 600-3192 and we’ll walk your lot.
We upgrade vents to ember-resistant models, re-seal panel joints with intumescent sealant, add Class A roof underlayment at eaves, and clear defensible space per California code. Dvele’s standard detailing often doesn’t cover WUI requirements out of the box, so we spec those changes by elevation. Estimates include every fire-hardening line item.
Yes. The panel system is structural; the interior is finish work. We’ve installed Cambria, Silestone, and Caesarstone countertops inside Dvele shells and done Dvele repair in Loma Linda and throughout San Bernardino. The key is sequencing: countertop templating happens after panels settle, not before. We schedule it that way so stone doesn’t crack from thermal movement.
Class A asphalt shingles from GAF, CertainTeed, or Owens Corning are the standard for valley homes, and metal roofing performs well for WUI and high-wind foothill exposures. Dvele panels accept conventional roofing systems with proper underlayment. We spec roof type based on where in San Bernardino you’re building. Call (855) 600-3192 for a roof-only quote if that’s all you need.
Dvele’s factory panels hold up structurally, but sealants, finishes, and exposed fasteners degrade faster in San Bernardino’s 100°F-plus summers. We spec UV-stable sealants at every seam, heat-rated exterior finishes, and proper eave shading where the design allows. It’s the difference between a 10-year envelope and a 25-year one. Estimates are free – call (855) 600-3192 and we’ll break down what your specific address needs.
Service Areas Near San Bernardino
Our crews run Dvele projects throughout the Inland Empire. If you’re in Dvele service in Rialto territory, Dvele service in Fontana, Colton, Redlands, Loma Linda, or Bloomington, we can bring the same crew and the same Dvele expertise to your site. No subs who’ve never touched a panel before.
Book Your Dvele Service in San Bernardino Today
From the kitchen to the roofline, one contractor handles every trade. If you’re planning a Dvele build, remodel, or fire-hardening retrofit in San Bernardino, call (855) 600-3192 to schedule your free estimate. Ruben will walk your property and give you a straight answer on scope, schedule, and price.
Written by Ruben Montoya, Owner at Stallion Contractors, serving San Bernardino since day one.